Drone Accessories

Readytosky M3 Shockproof Landing Pads (4-Piece Set) – High-Density Vibration Isolation

Give your racing drone a softer touch with the Readytosky M3 Shockproof Sponge Pads. These ultralight, high-density landing pads are the perfect alternative to heavy plastic or metal landing gear. Specifically designed for mini quads ranging from 180mm to 300mm, they provide a critical "crumple zone" that absorbs the kinetic energy of hard landings, protecting your carbon fiber frame and sensitive internal electronics from stress fractures.

Beyond landing protection, these pads feature a genuine 3M adhesive backing, making them dual-purpose: they can also be used as vibration-dampening mounts for flight controllers and gyros to ensure ultra-stable flight telemetry.

Key Highlights:

• Superior Impact Absorption: Engineered to dampen the shock of fast, aggressive landings, significantly extending the life of your motor bolts and arm tips.

• Ultralight Performance: Designed for FPV racing and freestyle, these pads add virtually zero weight, ensuring your quad remains agile and responsive.

• Industrial-Grade 3M Adhesive: The pre-applied 3M backing provides a permanent, vibration-resistant bond to carbon fiber, plastic, or aluminum surfaces.

• Anti-Static & Protective: The specialized sponge material helps prevent static buildup and keeps your frame slightly elevated off damp or dusty surfaces.

• Universal Mini-Quad Fit: A perfect fit for the ZMR250, QAV210, QAV-R 220, and FPV racing frames. Simply peel and stick to the underside of your motor mounts.

Technical Specifications

Installation Pro-Tip:

Before applying, clean the bottom of your drone's carbon fiber arms with a little isopropyl alcohol. This ensures the 3M adhesive creates a maximum-strength bond that won't peel off during high-speed slides or grass landings.

Partsbaba Quality Assurance: We only supply 100% genuine Readytosky accessories. Your purchase is protected by our 14-day replacement warranty against manufacturing defects. For full details on our returns policy, please visit our support page.

ReadytoSky Foldable GPS Antenna Mount – Precision Stability for Long-Range UAVs

Protect your GPS signal and improve flight safety with the ReadytoSky Foldable GPS Bracket. Specifically designed to isolate your GPS module from the electromagnetic interference (EMI) generated by your drone's power distribution board and motors, this high-clearance stand ensures your flight controller achieves a faster, more stable satellite lock.

Crafted from a blend of lightweight aluminum and durable composite materials, this mount features a fold-down mechanism that allows for easy transport and storage without requiring you to disassemble your GPS wiring. It is the gold standard for APM, Pixhawk, and MultiWii builds where GPS accuracy is mission-critical.

Key Highlights:

• Interference Reduction: By elevating your GPS/Magnetometer module away from high-current ESCs and motors, you significantly reduce "toilet bowling" and magnetic interference.

• Universal Compatibility: Optimized for all standard GPS pucks, including the Ublox NEO-6M, M7N, M8N, and M10 series used in APM and Pixhawk ecosystems.

• Rugged Foldable Design: The sturdy pivot joint allows the antenna to be folded flat against the frame during transit, then locked securely in an upright position for flight.

• Precision CNC Components: Features a high-quality aluminum base and mounting plate for a vibration-free, secure attachment to your multirotor or quadcopter frame.

• Lightweight Geometry: Engineered to provide maximum height and stability with minimal impact on your drone's overall takeoff weight.

Technical Specifications

Pro-Builder Tip:

For the best results, use a small drop of blue thread-locker on the base mounting screws. This prevents the vibrations of the motors from loosening the bracket over time, ensuring your GPS stays perfectly level—which is vital for accurate "Position Hold" and "Auto Mission" modes!

Partsbaba Authenticity Guarantee: All ReadytoSky accessories supplied are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, helping you navigate with total confidence.

ReadytoSky PPM Encoder V1.3 – High-Precision PWM to PPM Signal Converter

Simplify your flight controller wiring and resolve receiver compatibility issues with the ReadytoSky PPM Encoder V1.3. This essential module is designed for pilots using older PWM receivers (which use one wire per channel) with modern flight controllers like Pixhawk, APM, or Paparazzi that require a single-wire PPM input.

By encoding up to 8 individual PWM channels into a single, streamlined PPM composite signal, this encoder significantly reduces "cable clutter" and frees up valuable I/O ports on your autopilot. Housed in a protective plastic case, the V1.3 is pre-flashed and mission-ready out of the box.

Key Highlights:

• 8-Channel Signal Aggregation: Capable of reading up to 8 individual PWM input channels and merging them into one precise PPM output stream.

• Plug-and-Play Firmware: Comes pre-flashed with the latest stable firmware, requiring no complex software setup for standard UAV operations.

• Programmable & Customizable: Advanced users can re-flash the onboard ATmega328P via an AVR ISP programmer to invert PPM signals or adjust specific fail-safe values.

• Protective Hard Case: Includes a durable, lightweight enclosure that shields the sensitive electronics from dust, moisture, and mechanical stress during flight.

• Broad Autopilot Support: The industry-standard solution for connecting PWM-only receivers to Pixhawk 2.4.8, APM 2.8, and other modern 32-bit flight stacks.

• Low Latency Conversion: High-speed processing ensures that your control inputs remain responsive with minimal signal delay.

Technical Specifications

What’s in the Box:

• 1x PPM Encoder Module (with Case)

• 1x 10-pin Input Cable (PWM side)

• 1x 3-pin Output Cable (PPM side)

Pro-Builder Tip:

If you are transitioning to an autonomous flight stack like ArduPilot, using a PPM encoder is the most reliable way to maintain your current RC transmitter setup. Ensure that your receiver is powered through the encoder's input rail, and double-check your channel mapping in Mission Planner after the first connection to ensure all 8 channels are moving correctly!

Partsbaba Authenticity Guarantee: All ReadytoSky electronics are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can integrate this encoder into your UAV with complete confidence.

ReadytoSky I2C Splitter Hub with Cable – Essential Pixhawk/APM Expansion

Maximize the peripheral capacity of your flight stack with the ReadytoSky I2C Splitter Hub. Standard flight controllers like the Pixhawk or APM often come with a limited number of I2C ports, which can become a bottleneck when adding advanced sensors. This bus expansion module acts as a high-speed "power strip" for your data, allowing you to connect up to four additional I2C devices—such as external compasses, digital airspeed sensors, LED modules, or specialized laser rangefinders—using only a single port on your flight controller.

Crafted for reliability in high-vibration environments, the ReadytoSky splitter ensures stable data transmission across all connected nodes, making it a critical component for professional UAV builds and complex autonomous platforms.

Key Highlights:

• 4-Way Port Expansion: Instantly converts one I2C port into four, enabling the simultaneous use of multiple external sensors and accessories.

• Seamless Compatibility: Designed specifically for the Pixhawk (2.4.6/2.4.8) and APM 2.8 ecosystems, utilizing standard 4-pin JST-GH or DF13 style connections.

• Plug-and-Play Installation: Includes a pre-terminated 4-wire cable, allowing for immediate integration without the need for custom soldering or wiring harnesses.

• Ultralight & Compact: Measuring just 37mm x 18.3mm, this hub fits easily into tight frames and adds negligible weight to your aircraft's takeoff profile.

• Robust Data Bus: Features a high-quality PCB that maintains signal integrity across all four ports, preventing sensor dropouts during critical flight maneuvers.

Technical Specifications

Pro-Builder Tip:

When connecting multiple high-draw I2C peripherals (like high-brightness RGB LED boards), ensure your Flight Controller’s internal regulator can handle the cumulative current. For complex setups with an airspeed sensor and external GPS/Compass, the ReadytoSky Splitter is the cleanest way to keep your wiring loom organized and "pro-tier" in appearance!

Partsbaba Quality Commitment: All ReadytoSky accessories are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can expand your autonomous system with total peace of mind.