JST Connectors

The 4 Pin JST SM Set includes both male and female 15cm wire-to-wire connectors designed for reliable electrical connections in various electronic projects. These components are ideal for secure, quick plug-and-play wiring, ensuring compatibility with devices requiring a 4-pin JST SM interface. Constructed for durability, these connectors are perfect for hobbyists and professionals working on robotics, LED lighting, or other low-voltage applications.

• Includes male and female connectors each with 15cm wires for flexible installation options
• Specifically designed to fit standard 4-pin JST SM connectors used in electronics
• Wire-to-wire configuration enables secure and stable connections without soldering
• Compact and lightweight components suited for tight spaces and compact projects
• High-quality materials ensure long-lasting performance even under frequent use
• Compatible with various low-voltage devices including LED strips, sensors, and small motors
• Easy to install connectors reduce setup time and simplify electrical wiring tasks

The 11 pin JST XH connector with 2.5mm pitch offers a reliable one-side female design, complete with 30cm wires to facilitate easy installation. It is crafted for seamless connections in electronics projects requiring multiple pin configurations. This component suits various applications where a compact and secure wiring solution is essential, ensuring consistent electrical contact and durable performance.

• 11-pin configuration supports complex multi-wire connections efficiently
• 2.5mm pitch spacing provides compatibility with standard JST XH connectors
• One-side female housing simplifies wiring setup and ensures secure cable attachment
• 30cm wire length offers flexibility for placement in diverse electronic assemblies
• Ideal for use in component wiring, circuitry projects, and device prototyping
• Designed to maintain stable electrical contacts under various conditions
• Compact form factor fits tight spaces while maintaining connection reliability

The 4P 1.25mm Male+Female 30cm cable is a compact and reliable electronic component designed for precise connectivity in various circuits. Featuring a 1.25mm pitch, this 30cm long cable combines both male and female connectors, ensuring seamless integration and robust performance. Ideal for electronics projects requiring secure connections, it supports efficient signal transmission and compatibility with standard 4-pin interfaces.

• 1.25mm pitch ensures precise alignment and stable connections in tight spaces
• Includes both male and female connectors for versatile pairing and easy installation
• 30cm length offers flexible routing options without excess cable bulk
• Designed for use with 4-pin component interfaces, enhancing compatibility
• Compact construction supports integration in delicate electronic assemblies
• Durable connectors provide reliable contact to maintain signal integrity

This 7-pin JST XH connector features a 2.5mm pitch and is designed with a one-side female terminal, paired with 30cm long wires for flexible installation. Ideal for electronic component connections, it ensures reliable and secure contact in compact assemblies. Compatible with a variety of devices requiring a 7-pin interface, it suits applications in prototyping, small electronics, and wiring harnesses where stable connectivity is essential.

• 2.5mm pitch design guarantees precise fit and consistent electrical contact
• Seven-pin configuration supports multi-signal or power connections in a compact form
• 30cm wire length provides ample reach for varied installation layouts
• One-side female connector simplifies mating with male headers and components
• Constructed to maintain durability under regular connection cycles
• Ideal for electronics, robotics, and DIY projects requiring secure wiring
• Compatible with standard 7-pin JST XH male connectors for broad application

This 2 Pin JST SM wiring set includes both male and female connectors, each with 15cm wires, designed to facilitate secure and reliable connections between electronic components. Ideal for projects requiring compact and organized wiring solutions, these connectors ensure stable signal and power transfer. Compatible with a variety of small electronics and hobbyist applications, the set offers straightforward plug-and-play assembly with durable construction.

• Equal length 15cm wires provide flexible reach for versatile setups.
• Male and female connectors allow easy and secure plug-in connections.
• Compact 2-pin design fits neatly in tight spaces without bulk.
• Reliable contact points ensure consistent electrical connectivity.
• Compatible with various electronic components commonly used in DIY and professional projects.
• Durable insulation protects wires against wear and environmental factors.
• Simple assembly reduces installation time and effort.

This 4 pin JST XH connector features a 2.5mm pitch and comes with one side female terminals attached to 30cm wires. Designed for secure and reliable electrical connections, it is ideal for use in various electronic components and circuit assemblies. Its compact size and standard pin configuration make it compatible with a wide range of modules requiring a 4-pin interface, ensuring versatility across multiple applications in electronics projects and repairs.

• 4 pin design tailored for stable multi-wire connections in compact spaces
• 2.5mm pitch ensures precise alignment and compatibility with JST XH series components
• One side female connector with secure locking to prevent accidental disconnections
• 30cm wire length provides ample reach for flexible installation in various setups
• Suitable for electronic projects, PCB wiring, and small device repairs requiring reliable connectors
• Constructed with durable materials to maintain consistent electrical performance over time

The 6 pin JST 1.25mm One Side Female connector equipped with 30cm wires is designed for reliable electrical connections in various electronic projects. With a compact 1.25mm pitch and six pins, this component is ideal for applications requiring precise and secure wire-to-board connections. The extended 30cm wiring length offers flexibility for setups needing moderate cable runs, making it compatible with many electronics and DIY projects where space and organization matter.

• Six-pin configuration supports multiple signal or power lines in a compact form factor.
• 1.25mm pitch ensures a precise fit compatible with JST standard connectors.
• One side female design allows easy mating with male headers or connectors.
• 30cm wire length gives ample reach for versatile wiring arrangements.
• Durable materials provide secure and long-lasting electrical connections.
• Compact size suits tight spaces in electronic assemblies.
• Widely applicable in hobbyist electronics, prototyping, and repair tasks.

Product Description

The 7 Pin JST PH 2.0mm Both Side Female 30cm Cable is a high-quality pre-crimped wire harness designed to provide secure and reliable wire-to-board connections between two compatible JST PH 2.0mm male headers. Featuring 7-pin JST PH 2.0mm female connectors on both ends and a 30cm cable length, this ready-to-use cable simplifies wiring, reduces assembly time, and ensures dependable electrical performance.

Compatible with the JST PH 2.0mm series, this cable is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, embedded systems, consumer electronics, and DIY electronics projects. The 30cm cable provides flexibility for routing while maintaining a clean and organized installation.

Manufactured using high-quality stranded copper conductors with durable PVC insulation, the cable offers excellent conductivity, flexibility, and long-term reliability. The factory-crimped female connectors ensure a secure fit with compatible JST PH 2.0mm male headers, reducing the chances of loose connections and signal interruptions.

Whether you're connecting controller boards, sensor modules, displays, or custom electronic assemblies, the 7 Pin JST PH 2.0mm Both Side Female 30cm Cable provides a convenient and dependable plug-and-play wiring solution.

Key Features

• JST PH 2.0mm compatible female connectors on both ends
• 7-pin configuration
• 30cm cable length
• Factory-crimped terminals for secure and reliable connections
• High-quality stranded copper conductors
• Flexible PVC insulated cable
• Low contact resistance for stable electrical performance
• Secure connector locking mechanism
• Ready-to-use wiring solution
• Suitable for compact electronic applications

Applications & Use Cases

The 7 Pin JST PH 2.0mm Both Side Female Cable is commonly used in:

• Drones and UAV electronics
• Robotics and automation systems
• Battery Management Systems (BMS)
• IoT devices
• Sensor and control modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and custom cable assemblies

Technical Specifications

• Connector Type: JST PH 2.0mm Female to Female
• Number of Pins: 7
• Pitch: 2.0mm
• Cable Length: 30cm
• Cable Type: Both Side Female
• Conductor Material: Stranded Copper
• Insulation Material: PVC
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 7-pin Male Header

Why Choose This Cable?

The 7 Pin JST PH 2.0mm Both Side Female 30cm Cable is an ideal solution for applications requiring quick and reliable connections between compatible JST PH headers. Its pre-crimped connectors eliminate manual wiring effort, while the durable construction ensures consistent performance in drones, robotics, embedded electronics, and other compact electronic systems.

Package Includes

• 1 × 7 Pin JST PH 2.0mm Both Side Female 30cm Cable

This 6 pin JST PH 2.0mm one side female connector with a 30cm wire offers a reliable solution for connecting PCBs to wires or linking multiple boards. Designed for quick disconnect and signal transfer, it supports efficient power and data transmission in various electronics projects. Its compact 2.0mm pitch ensures compatibility with JST PH series connectors, making it ideal for custom wiring harnesses, prototyping, and repair tasks.

• Compact 2.0mm pitch delivers precise, secure connections for small electronic components.
• The six-pin configuration enables versatile signal and power transfers between boards and wires.
• 30cm length provides ample reach for flexible wiring setups and neat cable management.
• Compatible with standard JST PH connectors, offering seamless integration with existing components.
• Designed for quick disconnection, simplifying maintenance and component replacement.
• Durable female housing ensures stable connections and long-term reliability in various environments.

Product Description

The 5 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry is a high-quality PCB-mounted wire-to-board connector designed to provide secure and reliable electrical connections in compact electronic systems. Featuring a 2.0mm pitch, 5-pin configuration, and vertical straight top-entry design, this connector is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, industrial control systems, and embedded electronics.

Compatible with the JST PH 2.0mm series, this header is designed for through-hole (THT) PCB mounting, providing excellent mechanical strength and long-term durability. The vertical top-entry orientation allows cables to connect directly from above the PCB, making it suitable for applications requiring efficient cable management and vertical board-to-wire connections.

The connector features high-quality copper alloy contacts with tin plating, ensuring low contact resistance, reliable electrical conductivity, and excellent corrosion resistance. Its high-temperature thermoplastic housing offers superior insulation and withstands soldering temperatures, making it suitable for both prototype development and mass production.

Whether you're designing a multi-signal PCB, assembling a drone controller, or building industrial and embedded electronic systems, the 5 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry provides a compact, reliable, and durable wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible PCB header
• 5-pin wire-to-board connector
• 2.0mm pitch
• Through-hole (THT) PCB mounting
• Vertical straight top-entry design
• Polarized connector prevents incorrect mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Strong mechanical retention after soldering
• Compact and reliable design
• Easy installation and dependable electrical performance

Applications & Use Cases

The 5 Pin JST PH 2.0mm Vertical Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation systems
• Battery Management Systems (BMS)
• IoT devices
• Sensor and control modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible Header
• Number of Pins: 5
• Pitch: 2.0mm
• Mounting Type: Through-Hole (THT)
• Orientation: Vertical Straight (Top Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 5-pin Female Housing

Why Choose This Header?

The 5 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry is ideal for applications requiring multiple signal or power connections in a compact PCB layout. Its through-hole construction provides excellent mechanical stability, while the polarized design ensures secure and reliable mating. Suitable for drones, robotics, industrial electronics, and embedded systems, it delivers consistent performance and long-term durability.

Package Includes

• 1 × 5 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry Connector

The 5 pin JST PH 2.0mm One side Female 30cm connector is designed to efficiently link PCBs to wires, enabling quick disconnect and reliable signal or power transfer. Featuring a 2.0mm pitch and five pins, this female connector ensures stable electrical connections for various electronic projects. Its 30cm wire length offers flexibility, making it suitable for compact and medium-range wiring applications in components and devices where secure and detachable connections are essential.

• Equipped with a 2.0mm pitch for precise and secure mating with compatible boards
• Five-pin design supports multiple signal or power lines simultaneously
• 30cm wire length provides versatile reach for diverse wiring setups
• Female connector style enables quick and easy disconnection without soldering
• Ideal for connecting PCBs to wires or bridging signals between boards
• Constructed for dependable electrical performance in component assemblies

Product Description

The 4 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry is a high-quality PCB-mounted wire-to-board connector designed to provide secure and reliable electrical connections in compact electronic systems. Featuring a 2.0mm pitch, 4-pin configuration, and vertical straight top-entry design, this connector is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, and embedded systems.

Compatible with the JST PH 2.0mm series, this header is designed for through-hole (THT) PCB mounting, offering excellent mechanical strength and durability. The vertical top-entry orientation allows cables to connect directly from above the PCB, making it suitable for applications where vertical cable routing and efficient board layout are required.

The connector features high-quality copper alloy contacts with tin plating, ensuring low contact resistance, reliable conductivity, and excellent corrosion resistance. Its high-temperature thermoplastic housing provides superior electrical insulation and withstands soldering temperatures, making it suitable for both prototyping and production applications.

Whether you're building a drone flight controller, designing an embedded system, or creating custom electronic hardware, the 4 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry offers a compact, durable, and dependable wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible PCB header
• 4-pin wire-to-board connector
• 2.0mm pitch
• Through-hole (THT) PCB mounting
• Vertical straight top-entry design
• Polarized connector prevents incorrect mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Strong mechanical retention after soldering
• Compact and reliable design
• Easy installation and dependable electrical performance

Applications & Use Cases

The 4 Pin JST PH 2.0mm Vertical Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation
• Battery Management Systems (BMS)
• IoT devices
• Sensor modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible Header
• Number of Pins: 4
• Pitch: 2.0mm
• Mounting Type: Through-Hole (THT)
• Orientation: Vertical Straight (Top Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 4-pin Female Housing

Why Choose This Header?

The 4 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry is an excellent choice for PCB designs requiring vertical cable connections and reliable wire-to-board interfaces. Its through-hole construction provides superior mechanical strength, while the polarized design ensures secure and accurate mating. Ideal for drones, robotics, embedded systems, and DIY electronics, it delivers dependable performance in compact electronic assemblies.

Package Includes

• 1 × 4 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry Connector

The 14 pin JST XH connector features a 2.5mm pitch and comes with a single-sided female housing attached to 30cm long wires. Designed for reliable, low-voltage electrical connections, this component is ideal for connecting battery packs, circuit boards, and other electronic assemblies requiring compact and secure wiring solutions. Its precise pin spacing ensures compatibility with standard JST XH headers, making it suitable for hobbyist and professional electronics projects alike.

• 14-pin configuration provides multiple connection points in a compact form factor
• 2.5mm pitch ensures compatibility with JST XH standard connectors
• Single-sided female connector simplifies wiring and reduces assembly complexity
• 30cm wire length offers flexibility for various installation layouts
• Durable construction supports consistent electrical performance over time
• Ideal for battery interfaces, sensor connections, and PCB wiring tasks

The 2 pin JST 1.25mm connector features a 30cm length with female connectors on both ends, designed for reliable electrical connections in compact electronic applications. Ideal for linking components requiring a secure and compact connector interface, this component suits various projects needing precise 1.25mm pitch spacing. Its durable construction ensures consistent signal transmission, making it compatible with standard JST 1.25mm series connectors.

• Compact 1.25mm pitch supports tight spaces and precise wiring layouts
• 30cm length provides ample reach between components without excess cable
• Female connectors on both ends enable flexible connections in diverse configurations
• Engineered for stable and secure electrical contact with JST 1.25mm male counterparts
• Suitable for use in consumer electronics, hobby projects, and small-scale assemblies
• Lightweight and durable construction maintains performance under repeated use

The 3 pin JST 1.25mm one side female connector with 30cm wires is designed for reliable and compact electrical connections in various electronic projects. It features a slim 1.25mm pitch and includes a set of 30cm long wires, making it ideal for connecting components in tight spaces. This connector is suitable for use in hobby electronics, robotics, and small device wiring, ensuring secure connections with compatible JST 1.25mm male terminals.

• Compact 1.25mm pitch design allows for space-saving connections in tight electronic assemblies.
• 30cm pre-attached wires provide flexibility and convenient reach for component placement.
• One side female housing ensures secure mating with JST 1.25mm male connectors.
• Durable construction maintains reliable electrical contact under typical usage conditions.
• Compatible with a wide range of small electronics, including sensors, motors, and circuit boards.
• Easy to integrate into custom wiring harnesses for DIY and professional applications.

The 3 pin JST XH connector offers a reliable and compact solution for electronic wiring needs. Featuring a 2.5mm pitch and a one-side female design, this component comes pre-attached with 30cm wires, making it easy to integrate into a variety of electrical assemblies. Ideal for low-voltage applications, this connector ensures secure connections and smooth compatibility with devices requiring JST XH interfaces, making it a versatile choice for hobbyists and professionals alike.

• 2.5mm pitch spacing ensures precise and stable electrical contact.
• Three-pin configuration supports multiple circuit connections in a compact form.
• One-sided female connector simplifies wiring and installation processes.
• 30cm pre-attached wires provide flexibility and ease of use in various setups.
• Compatible with a wide range of electronic components using JST XH connectors.
• Designed for low-voltage applications, maintaining safety and reliability.

The 7 pin JST XH 2.5mm to Pin Entry Header is a reliable electronic component designed for secure and precise connections in various wiring and circuit board applications. Featuring a compact 2.5mm pitch, this header facilitates easy integration with JST XH connectors, ensuring stable electrical contact and compatibility with multiple devices. Ideal for use in prototyping, repair, and custom wiring setups, it supports efficient signal transfer with durability in demanding environments.

• 7-pin configuration provides versatile connectivity options for multi-wire setups
• 2.5mm pitch spacing ensures compatibility with standard JST XH connectors
• Pin entry design simplifies soldering and installation on circuit boards
• Durable construction maintains consistent electrical contact during repeated use
• Compact size fits well in tight spaces and minimizes board footprint
• Ideal for electronics projects requiring reliable sensor or power connections
• Compatible with a range of electronic components for flexible application

This 4-pin JST connector features a 1.25mm pitch and is equipped with Teflon PTFE insulated wiring rated at 28/7/36 AWG. Designed with a one-side female connector and a 15cm length, it offers a reliable quick disconnect solution ideal for compact electronic assemblies. Its durable Teflon insulation ensures resistance to heat and chemicals, making it suitable for precise and space-conscious component connections in various electronic applications.

• Compact 1.25mm pin spacing enables dense circuit board layouts without sacrificing reliability
• Teflon PTFE insulation provides excellent thermal and chemical resistance for long-lasting performance
• 28/7/36 AWG stranded wire balances flexibility with stable electrical conductivity
• 15cm wire length offers versatile reach for connecting components in tight spaces
• One-side female connector ensures quick and secure disconnection in modular setups
• Ideal for space-saving electronics where compact and dependable connectors are essential

Product Description

The 7 Pin JST PH 2.0mm One Side Female 30cm Cable is a high-quality pre-crimped wire harness designed to provide secure and reliable wire-to-board connections for electronic applications. Featuring a 7-pin JST PH 2.0mm female connector on one end and 30cm flying leads on the other end, this cable provides a convenient solution for connecting PCBs, modules, sensors, and electronic components without requiring manual crimping.

Compatible with the JST PH 2.0mm series, this cable is widely used in drones, robotics, battery management systems (BMS), IoT devices, sensors, embedded systems, consumer electronics, and DIY electronics projects. The 30cm cable length provides flexibility for routing and installation while maintaining a neat and organized wiring setup.

The cable is manufactured using high-quality stranded copper conductors with durable PVC insulation, ensuring excellent conductivity, flexibility, and long-term reliability. The factory-crimped JST PH female connector provides a secure connection with compatible JST PH 2.0mm male headers, reducing the risk of loose contacts and intermittent connections.

Whether used for custom cable assemblies, prototype development, or electronic device integration, the 7 Pin JST PH 2.0mm One Side Female 30cm Cable provides a reliable and easy-to-install wiring solution.

Key Features

• JST PH 2.0mm compatible female connector
• 7-pin configuration
• 30cm cable length
• Female connector on one end with flying wires on the other end
• Factory-crimped terminals for secure connections
• High-quality stranded copper wires
• Flexible PVC insulation
• Compact and lightweight design
• Easy plug-and-play installation
• Reliable electrical performance

Applications & Use Cases

The 7 Pin JST PH 2.0mm One Side Female Cable is commonly used in:

• Drones and UAV electronics
• Robotics and automation systems
• Battery Management Systems (BMS)
• IoT devices
• Sensor and control modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and custom wiring harnesses

Technical Specifications

• Connector Type: JST PH 2.0mm Female Connector
• Number of Pins: 7
• Pitch: 2.0mm
• Cable Length: 30cm
• Cable Type: One Side Female with Flying Leads
• Conductor Material: Stranded Copper
• Insulation Material: PVC
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 7-pin Male Header

Why Choose This Cable?

The 7 Pin JST PH 2.0mm One Side Female 30cm Cable is an ideal choice for applications requiring a ready-made wiring solution with a secure JST connection on one side and flexible wire access on the other. Its durable construction, compact design, and reliable connector performance make it suitable for drones, robotics, embedded electronics, and custom electronic projects.

Package Includes

• 1 × 7 Pin JST PH 2.0mm One Side Female 30cm Cable

Product Description

The 6 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry is a high-quality PCB-mounted wire-to-board connector designed to provide secure and reliable electrical connections in compact electronic systems. Featuring a 2.0mm pitch, 6-pin configuration, and vertical straight top-entry design, this connector is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, industrial control systems, and embedded electronics.

Compatible with the JST PH 2.0mm series, this header is designed for through-hole (THT) PCB mounting, providing excellent mechanical strength and long-term durability. The vertical top-entry orientation allows cables to connect directly from above the PCB, making it suitable for applications requiring efficient cable management and vertical board-to-wire connections.

The connector features high-quality copper alloy contacts with tin plating, ensuring low contact resistance, reliable electrical conductivity, and excellent corrosion resistance. Its high-temperature thermoplastic housing offers superior insulation and withstands soldering temperatures, making it suitable for both prototype development and mass production.

Whether you're designing a multi-signal PCB, assembling a drone controller, or building industrial and embedded electronic systems, the 6 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry provides a compact, reliable, and durable wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible PCB header
• 6-pin wire-to-board connector
• 2.0mm pitch
• Through-hole (THT) PCB mounting
• Vertical straight top-entry design
• Polarized connector prevents incorrect mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Strong mechanical retention after soldering
• Compact and reliable design
• Easy installation and dependable electrical performance

Applications & Use Cases

The 6 Pin JST PH 2.0mm Vertical Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation systems
• Battery Management Systems (BMS)
• IoT devices
• Sensor and control modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible Header
• Number of Pins: 6
• Pitch: 2.0mm
• Mounting Type: Through-Hole (THT)
• Orientation: Vertical Straight (Top Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 6-pin Female Housing

Why Choose This Header?

The 6 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry is ideal for applications requiring multiple signal or power connections in a compact PCB layout. Its through-hole construction provides excellent mechanical stability, while the polarized design ensures secure and reliable mating. Suitable for drones, robotics, industrial electronics, and embedded systems, it delivers consistent performance and long-term durability.

Package Includes

• 1 × 6 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry Connector

This 4-pin JST PH connector features a 2mm pitch and a Teflon PTFE insulated wire, ideal for transferring signals and power between PCBs and wiring setups. With a 15cm length and one side female connection, it ensures reliable and quick disconnection or transfer in electronic assemblies. Perfect for applications requiring a compact, durable connector that maintains signal integrity and supports easy maintenance or upgrades.

• 2mm pitch provides precise and secure connections for compact electronic components.
• Teflon PTFE insulation enhances durability and resistance to heat and chemicals, ensuring long-lasting performance.
• 15cm wire length offers convenient reach for various PCB-to-wire configurations.
• One side female connector allows straightforward connection and disconnection in complex assemblies.
• 4-pin configuration supports multiple signal and power lines simultaneously for versatile use.
• Ideal for electronics projects, prototyping, and industrial applications requiring quick and reliable connectivity.

This 4-pin JST PH connector features a 2.0mm pitch and comes with female terminals on both ends, making it ideal for connecting wires to PCBs or linking two boards. With a 10cm cable length, it ensures flexibility and ease in signal and power transfer. Designed for reliable quick disconnects, this connector is well-suited for electronics projects requiring compact and secure wire-to-board connectivity.

• 4-pin configuration supports multiple signal or power lines for versatile circuit designs
• 2.0mm pitch ensures compatibility with standard JST PH connectors and headers
• Female terminals on both ends facilitate easy wire-to-board or board-to-board connections
• 10cm length provides convenient reach without excess bulk in wiring setups
• Designed for quick disconnects to simplify assembly and maintenance tasks
• Durable construction maintains secure contact during vibration or movement
• Perfect for hobbyist electronics, prototyping, and small-scale production use

Product Description

The 2 Pin JST PH 2.0mm Both Side Female 30cm Cable is a high-quality pre-crimped wire harness designed to provide secure and reliable wire-to-board connections between two compatible JST PH 2.0mm male headers. Featuring 2-pin JST PH 2.0mm female connectors on both ends and a 30cm cable length, this ready-to-use cable simplifies wiring, reduces assembly time, and ensures dependable electrical performance.

Compatible with the JST PH 2.0mm series, this cable is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, embedded systems, consumer electronics, and DIY electronics projects. The 30cm cable provides flexibility for routing while maintaining a clean and organized installation.

Manufactured using high-quality stranded copper conductors with durable PVC insulation, the cable offers excellent conductivity, flexibility, and long-term reliability. The factory-crimped female connectors ensure a secure fit with compatible JST PH 2.0mm male headers, reducing the risk of loose connections and signal interruptions.

Whether you're connecting controller boards, power modules, sensor modules, or custom electronic assemblies, the 2 Pin JST PH 2.0mm Both Side Female 30cm Cable provides a convenient and dependable plug-and-play wiring solution.

Key Features

• JST PH 2.0mm compatible female connectors on both ends
• 2-pin configuration
• 30cm cable length
• Factory-crimped terminals for secure and reliable connections
• High-quality stranded copper conductors
• Flexible PVC insulated cable
• Low contact resistance for stable electrical performance
• Secure connector locking mechanism
• Ready-to-use wiring solution
• Suitable for compact electronic applications

Applications & Use Cases

The 2 Pin JST PH 2.0mm Both Side Female Cable is commonly used in:

• Drones and UAV electronics
• Robotics and automation systems
• Battery Management Systems (BMS)
• IoT devices
• Sensor modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and custom cable assemblies

Technical Specifications

• Connector Type: JST PH 2.0mm Female to Female
• Number of Pins: 2
• Pitch: 2.0mm
• Cable Length: 30cm
• Cable Type: Both Side Female
• Conductor Material: Stranded Copper
• Insulation Material: PVC
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 2-pin Male Header

Why Choose This Cable?

The 2 Pin JST PH 2.0mm Both Side Female 30cm Cable is an ideal solution for applications requiring quick and reliable connections between compatible JST PH headers. Its pre-crimped connectors eliminate manual wiring effort, while the durable construction ensures consistent performance in drones, robotics, embedded electronics, and other compact electronic systems.

Package Includes

• 1 × 2 Pin JST PH 2.0mm Both Side Female 30cm Cable

Product Description

The 2 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry is a high-quality PCB-mounted wire-to-board connector designed to provide secure and reliable electrical connections in compact electronic systems. Featuring a 2.0mm pitch, 2-pin configuration, and right-angle side-entry design, this connector is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, and embedded systems.

Compatible with the JST PH 2.0mm series, this header is designed for through-hole (THT) PCB mounting, offering excellent mechanical strength and durability. The horizontal right-angle orientation allows cables to connect parallel to the PCB, making it ideal for compact enclosures and applications requiring low-profile cable routing.

The connector features high-quality copper alloy contacts with tin plating, ensuring low contact resistance, reliable conductivity, and excellent corrosion resistance. Its high-temperature thermoplastic housing provides superior electrical insulation and withstands soldering temperatures, making it suitable for both prototyping and production applications.

Whether you're building a drone flight controller, designing an embedded system, or creating custom electronic hardware, the 2 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry offers a compact, durable, and dependable wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible PCB header
• 2-pin wire-to-board connector
• 2.0mm pitch
• Through-hole (THT) PCB mounting
• Horizontal right-angle side-entry design
• Polarized connector prevents incorrect mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Strong mechanical retention after soldering
• Compact, low-profile design
• Reliable electrical performance and easy installation

Applications & Use Cases

The 2 Pin JST PH 2.0mm Right Angle Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation
• Battery Management Systems (BMS)
• IoT devices
• Sensor modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible Header
• Number of Pins: 2
• Pitch: 2.0mm
• Mounting Type: Through-Hole (THT)
• Orientation: Horizontal Right Angle (Side Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 2-pin Female Housing

Why Choose This Header?

The 2 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry is an excellent choice for compact PCB designs that require side-entry cable routing. Its through-hole construction provides enhanced mechanical stability, while the polarized design ensures secure and reliable connections. Ideal for drones, robotics, and embedded electronics, it offers dependable performance in both development and production environments.

Package Includes

• 1 × 2 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry Connector

The 10 pin JST connector with a 1.25mm pitch features a 10cm length and female connectors on both ends, designed for reliable low-voltage electrical connections in compact electronic projects. This component is ideal for creating secure, space-saving wiring harnesses and is compatible with a wide range of small devices requiring stable signal or power transfer. Its precision construction supports neat, efficient cable management and reliable contact in tight assemblies.

• 10-pin configuration allows multiple connections within a compact footprint
• 1.25mm pitch ensures precise alignment and secure mating with compatible JST headers
• 10cm cable length provides flexibility for routing in small electronics setups
• Female connectors on both ends enable easy integration with male JST pins
• Designed for low-voltage signal and power transmission in delicate electronic circuits
• Durable construction maintains strong electrical contact under repeated connection cycles
• Ideal for applications including robotics, sensor modules, and compact control boards
• Simplifies wiring harness assembly by minimizing space without compromising performance

The 13 pin JST XH connector with a 2.5mm pitch offers a reliable one-sided female design paired with 30cm long wires, perfect for a range of electronic projects. This component is engineered for secure connections in compact spaces, making it ideal for circuit board assembly and wiring harnesses. Its compatibility with standard JST XH pin layouts ensures seamless integration into various devices and systems requiring precise, stable connections.

• 13-pin configuration provides multiple connection points for complex circuits.
• 2.5mm pitch spacing guarantees compatibility with standard JST XH series connectors.
• One side female design simplifies installation and maintains compact wiring layouts.
• 30cm wire length offers flexibility in device placement and routing.
• Durable contacts ensure consistent electrical performance over time.
• Ideal for use in electronic assemblies, prototyping, and repair tasks.
• Lightweight and compact form factor supports efficient space management.

The 14 pin JST XH 2.5mm to Pin Entry Header is a reliable electronic component designed for secure and efficient connections in various circuits. Ideal for applications requiring a 2.5mm pitch, this header offers precise pin alignment with 14 pins, making it suitable for interfacing with JST XH connectors. It ensures robust mechanical and electrical performance, fitting seamlessly into compact electronic assemblies and prototyping projects.

• 14-pin configuration provides multiple connection points for complex wiring setups.
• 2.5mm pitch spacing ensures compatibility with standard JST XH connectors.
• Pin entry design offers straightforward soldering and secure contact for enhanced durability.
• Compact size supports use in tight circuit board layouts without compromising functionality.
• Reliable electrical connections reduce risk of signal loss or interference.
• Versatile component suited for hobbyist projects, electronic repairs, and custom device assembly.
• Constructed from quality materials to withstand repeated use and environmental stresses.

This 2 pin JST 1.25mm through hole header features a horizontal right angle design, making it an ideal connector for compact circuit board layouts. Designed for reliable electrical connections, it suits various electronic components requiring a secure, space-saving interface. Its 1.25mm pitch ensures compatibility with JST connectors and supports through hole mounting for sturdy attachment to printed circuit boards.

• Compact 1.25mm pitch provides precise spacing for neat and reliable connections.
• The horizontal right angle orientation optimizes space on circuit boards, perfect for tight installations.
• Through hole mounting guarantees strong mechanical stability and durability in electronic assemblies.
• Suitable for use in diverse electronic components and devices requiring JST-compatible headers.
• Manufactured to ensure consistent electrical performance across multiple connection cycles.
• Designed for easy integration with standard JST connector systems, enhancing versatility.