Visa

25T 28.5mm Metal Servo Motor Horn Half Arm Red

From ₹ 190.57

Only 1 items left

Mini 5V Lost Buzzer with JST Female Plug

From ₹ 189.55

ReadytoSky Mini 5V Lost Model Buzzer – High-Decibel Recovery Alarm

Never lose track of your aircraft again with the ReadytoSky Mini 5V Lost Model Buzzer. This compact, high-output audible alarm is the ultimate insurance policy for FPV drones, fixed-wing planes, and RC vehicles. Designed to trigger a loud, piercing alert during a signal loss or a crash, this buzzer helps you locate your model in tall grass, thick brush, or out-of-sight landing zones.

Equipped with a pre-soldered JST Female Plug, this buzzer offers a true plug-and-play solution for flight controllers and power distribution boards. Its ultralight footprint makes it an essential addition to even the smallest micro-quads, where every gram counts.

Key Highlights:

High-Decibel Alert: Engineered to produce a sharp, clear tone that cuts through ambient noise, making it significantly easier to recover "lost" models.
Plug-and-Play JST Connector: Features a standard JST female plug for a secure, solder-free connection to compatible pins on your flight stack or receiver.
Ultralight & Compact: Small enough to be tucked into tight frames or taped to an arm without affecting the flight dynamics or center of gravity of your drone.
Low-Power Efficiency: Optimized to run on a standard 5V rail, ensuring it won't drain your flight battery while providing maximum volume.
Multi-Purpose Functionality: Can be configured via Betaflight, INAV, or ArduPilot to act as a low-battery warning, a lost-model alarm, or a status indicator (arming/disarming).

Technical Specifications

Feature	Details
Brand	ReadytoSky
Operating Voltage	5V DC
Connector Type	JST Female Plug
Sound Output	High-Decibel Active Piezo
Dimensions	Approx. 9mm x 5.5mm (Buzzer unit)
Compatibility	Drones, RC Cars, Boats, and Arduino Projects
Application	Lost Model Alarm / Low Battery Warning

Pro-Builder Tip:

To get the most out of your buzzer in Betaflight, head to the "Configuration" tab and ensure "Beeper" is enabled. You can then assign a specific switch on your transmitter to the BEEPER mode in the "Modes" tab. If you ever go down in high weeds, just flip the switch to activate a constant "SOS" tone for easy recovery!

Partsbaba Quality Commitment: All ReadytoSky components are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can fly with the confidence that you'll always find your way home.

Are you installing this on a racing drone for crash recovery, or are you looking to use it as a low-voltage alarm for a DIY electronics project?

Only 2 items left

Pixhawk buzzer

From ₹ 165.25

Out of stock

15T Metal Servo Motor Horn Arm Red for ES08MA II

From ₹ 257.27

Only 1 items left

RG316 SMA Male to Male Extension Cable - 10cm (100mm)

₹ 199.00

RG316 SMA Male to Male Extension Cable – 10cm (100mm)

The RG316 SMA Male to Male Extension Cable is a compact RF extension cable designed to connect two devices or components equipped with compatible SMA female interfaces. With a length of 10cm (100mm), it provides a convenient way to extend an existing SMA connection while keeping the overall installation compact and organized.

Built around RG316 coaxial cable and fitted with SMA male connectors on both ends, this extension cable is suitable for a variety of RF, antenna, wireless communication, GPS, networking, testing, and electronic applications. Its short length makes it particularly useful where only a small amount of additional cable is required.

Key Features

10cm / 100mm Length: Compact cable length for short-distance RF connections and extensions.
SMA Male to Male: Features an SMA male connector at both ends for connecting compatible SMA female ports.
RG316 Coaxial Cable: Uses RG316-style coaxial construction for RF signal connections.
Compact Design: Suitable for installations where space and cable management are important.
Easy RF Extension: Allows an existing SMA connection to be extended without replacing the complete cable assembly.
Versatile Application: Suitable for compatible antenna, wireless, GPS, RF testing, and electronic equipment.

Product Specifications

Specification	Details
Product Type	RF Extension Cable
Cable Type	RG316
Connector 1	SMA Male
Connector 2	SMA Male
Cable Length	10cm / 100mm
Connector Configuration	Male to Male
Application	RF, Antenna, Wireless & Electronics

Applications

The RG316 SMA extension cable can be used in a wide range of compatible RF and electronic systems, including:

RF and antenna connections
Wireless communication equipment
GPS and navigation systems
Wi-Fi and networking equipment
RF modules and electronic devices
Signal testing and measurement setups
Laboratory and DIY electronics projects
Radio communication equipment

Why Use an SMA Male to Male Extension Cable?

Replacing an entire RF cable is not always necessary when additional cable length is required. A short SMA male to male extension cable provides a convenient connection between compatible SMA female ports while maintaining a compact installation.

The 10cm length is useful for setups where a longer extension would create unnecessary cable loops or clutter. It can also make component positioning easier when RF modules, antennas, adapters, or other equipment need to be separated by a short distance.

Compatibility

This cable is designed for equipment featuring compatible SMA female interfaces on both connection points. Before ordering, verify the connector gender and interface type of your equipment.

Important: SMA and RP-SMA connectors are different. An SMA male connector should not be assumed to be compatible with an RP-SMA female connector. Check the connector specification of your equipment before purchasing.

Installation Information

Connect each SMA male end to a compatible SMA female port and tighten the connector appropriately by hand or with a suitable connector tool. Avoid excessive force, sharp bends, or unnecessary stress on the cable and connectors.

For RF applications, keep the cable routing clean and avoid placing unnecessary mechanical stress on the connectors. Always verify the frequency and electrical requirements of your application before use.

Package Includes

1 × RG316 SMA Male to Male Extension Cable – 10cm (100mm)

Frequently Asked Questions

What is an RG316 SMA Male to Male cable?

It is an RF coaxial extension cable using RG316-style cable with an SMA male connector fitted to each end. It is designed to connect compatible SMA female interfaces.

What is the length of this SMA extension cable?

The cable length is 10cm (100mm).

What is the connector type?

This cable has SMA male connectors on both ends, making it an SMA male-to-male extension cable.

Where can I use this RG316 SMA cable?

It can be used in compatible RF, antenna, wireless communication, GPS, networking, testing, radio, and electronics applications.

Can I use this cable with RP-SMA connectors?

Not necessarily. SMA and RP-SMA use different connector configurations. Verify the exact connector type and gender of your equipment before purchasing.

Is this cable suitable for RF applications?

Yes. RG316 coaxial cable with SMA connectors is commonly used for RF signal connections. However, the cable should be selected according to the frequency, power, impedance, and other requirements of the specific application.

What is the benefit of the 10cm cable length?

The 10cm length provides a short and compact extension where only limited additional distance is required between two compatible SMA connections.

Only 2 items left

HOBBYWING XRotor 40A ESC Wire Leaded Speed

₹ 2,399.00

Hobbywing XRotor 40A ESC Wire Leaded Speed Controller

The Hobbywing XRotor 40A ESC is a brushless electronic speed controller designed for compatible drone, multirotor, and RC applications. This wire-leaded ESC provides a practical solution for replacing a damaged speed controller or servicing an existing power system where a compatible 40A ESC is required.

Designed to control the speed and direction of a compatible brushless motor, the Hobbywing XRotor 40A ESC helps provide responsive motor control and reliable operation when correctly matched with the motor, battery, propeller, and flight-control system. The wire-leaded configuration also makes it convenient for installation and replacement in compatible assemblies.

Key Features

40A Rated ESC: Designed for applications requiring a compatible 40A electronic speed controller.
Hobbywing XRotor Series: Genuine XRotor-series speed controller for compatible drone and RC systems.
Wire-Leaded Design: Supplied with wire leads for convenient electrical connection and installation.
Brushless Motor Control: Designed to regulate power supplied to compatible brushless motors.
Drone & RC Applications: Suitable for compatible multirotor, UAV, and RC power systems.
Replacement Solution: Useful for repairing or replacing a faulty or damaged ESC in a compatible setup.

Applications

The Hobbywing XRotor 40A ESC can be used in compatible:

Multirotor drones and quadcopters
UAV and aerial robotics projects
RC aircraft and other RC models
Brushless motor systems
Drone repair and replacement applications
DIY electronics and robotics projects

Why Choose the Hobbywing XRotor 40A ESC?

A properly matched ESC is essential for reliable brushless motor operation. The ESC manages the electrical power delivered to the motor according to the control signal received from the flight controller, receiver, or other compatible control system.

The XRotor 40A ESC is a suitable replacement option when your existing system requires a compatible Hobbywing XRotor speed controller. Its wire-leaded configuration can simplify replacement work where the original ESC uses a similar wiring arrangement.

Before installation, verify the exact ESC model, battery voltage, motor specifications, connector arrangement, wiring, and flight-controller compatibility. Do not select an ESC based on current rating alone.

Installation & Compatibility

Before connecting the ESC, switch off the battery and inspect all wiring and connectors. Confirm the polarity of the power connection and ensure that the ESC is compatible with the motor and control system.

When replacing an existing ESC, compare the original unit's model number, wire configuration, connectors, mounting arrangement, and electrical specifications with the replacement. Secure all connections properly before powering the system.

For drone and RC applications, the ESC should be selected according to the complete power-system requirements, including motor current, battery voltage, propeller configuration, and operating conditions.

Package Includes

1 × Hobbywing XRotor 40A ESC Wire Leaded Speed Controller

Frequently Asked Questions

What is the Hobbywing XRotor 40A ESC?

The Hobbywing XRotor 40A ESC is an electronic speed controller designed to control compatible brushless motors in drone, multirotor, UAV, and RC applications.

What does a 40A ESC do?

An ESC regulates the electrical power supplied to a brushless motor, allowing the flight controller or other control system to control motor speed.

Can this ESC be used as a replacement?

Yes, it can be used as a replacement when its model, electrical specifications, wiring, connectors, and control protocol are compatible with the original ESC and the rest of the power system.

Is this ESC suitable for drones?

The XRotor series is designed for aerial and multirotor applications. However, compatibility should be verified for the specific drone, motor, battery, and flight-control system before installation.

Does the product include wire leads?

Yes. This listing is for the wire-leaded version of the Hobbywing XRotor 40A ESC. Please check the product images and package details for the exact wire and connector configuration.

How do I choose the correct ESC for my motor?

Check the motor's maximum current, battery voltage, propeller combination, control protocol, and other system requirements. The ESC's continuous and peak current capabilities should be appropriate for the complete power system.

Only 2 items left

Mini 5V Passive Piezo Buzzer for Arduino & DIY Projects

From ₹ 29.00

Only 53 items left

High Landing Gear For SK480 SK620 F450 F550 Quadrocopter Black

From ₹ 217.14

₹ 184.49 each

In stock

Emax Transmitter Neck Strap

From ₹ 202.08

Out of stock

25T M3 Metal Servo Motor Horn Arm Red

From ₹ 135.55

Only 5 items left

25T 42mm 2-Point Metal Servo Motor Horn Arm Red

From ₹ 216.58

₹ 177.62 each

In stock

75cm Fast-fold Landing Pad, Waterproof Double Side Double Color Helipad

₹ 706.00

Readytosky PGY Mini 750 Fast-Fold Landing Pad – Your Portable Drone Helipad

Protect your drone’s sensitive gimbal, camera, and motors with the Readytosky PGY Mini 750. This 75cm fast-fold landing pad provides a clean, flat, and highly visible landing zone, preventing dust, grass, or moisture from interfering with your aircraft's internal components during takeoff and landing.

Constructed from premium waterproof nylon, this pad is designed for pilots who frequent diverse environments—from sandy beaches to damp fields. Its high-precision printing ensures the colors remain vibrant and fade-resistant, even after prolonged exposure to the sun.

Key Highlights:

75cm Landing Zone: Offers a generous target for GPS-assisted returns and manual landings, suitable for everything from mini quads to professional-grade platforms.
Double-Sided, Dual-Color Design: Features high-contrast orange and blue sides, allowing you to flip the pad to ensure maximum visibility against any terrain, whether it's snow, grass, or dirt.
Fast-Fold Portability: The spring-steel internal frame allows the pad to "pop up" instantly and fold down to a compact 28cm diameter for easy storage in your backpack or gear bag.
Weatherproof & Durable: Made from high-quality, waterproof nylon that is easy to wipe clean and built to withstand the downwash of high-torque motors.
Universal Compatibility: The ideal size for the DJI Mavic Series, Phantom 3/4, Inspire 1, and a wide range of FPV racing drones and RC helicopters.

Technical Specifications

Feature	Details
Brand	Readytosky / PGY
Diameter (Expanded)	75cm
Diameter (Folded)	28cm
Material	High-Quality Waterproof Nylon
Colors	Reversible Orange / Blue
Carry Bag	Included
Weight	Optimized for Portability

What’s Included:

1 x 75cm Fast-Fold Landing Pad
1 x Specialty Carrying Case: Featuring a convenient nylon handle for effortless transport to your flight location.

Partsbaba Quality Assurance: We only supply 100% genuine and original products. Every landing pad is backed by our 14-day replacement warranty against manufacturing defects. For more information on our policies, please visit our returns and cancellations page.

In stock

I2C Splitter

From ₹ 347.16

ReadytoSky I2C Splitter Hub with Cable – Essential Pixhawk/APM Expansion

Maximize the peripheral capacity of your flight stack with the ReadytoSky I2C Splitter Hub. Standard flight controllers like the Pixhawk or APM often come with a limited number of I2C ports, which can become a bottleneck when adding advanced sensors. This bus expansion module acts as a high-speed "power strip" for your data, allowing you to connect up to four additional I2C devices—such as external compasses, digital airspeed sensors, LED modules, or specialized laser rangefinders—using only a single port on your flight controller.

Crafted for reliability in high-vibration environments, the ReadytoSky splitter ensures stable data transmission across all connected nodes, making it a critical component for professional UAV builds and complex autonomous platforms.

Key Highlights:

4-Way Port Expansion: Instantly converts one I2C port into four, enabling the simultaneous use of multiple external sensors and accessories.
Seamless Compatibility: Designed specifically for the Pixhawk (2.4.6/2.4.8) and APM 2.8 ecosystems, utilizing standard 4-pin JST-GH or DF13 style connections.
Plug-and-Play Installation: Includes a pre-terminated 4-wire cable, allowing for immediate integration without the need for custom soldering or wiring harnesses.
Ultralight & Compact: Measuring just 37mm x 18.3mm, this hub fits easily into tight frames and adds negligible weight to your aircraft's takeoff profile.
Robust Data Bus: Features a high-quality PCB that maintains signal integrity across all four ports, preventing sensor dropouts during critical flight maneuvers.

Technical Specifications

Feature	Details
Brand	ReadytoSky
Interface Type	I2C (Inter-Integrated Circuit)
Ports	1 Input → 4 Outputs
Dimensions	37mm x 18.3mm x 9mm
Included Cable	4-Wire I2C Connector
Compatibility	Pixhawk 2.4.8, APM 2.8, PX4, and Arduino

Pro-Builder Tip:

When connecting multiple high-draw I2C peripherals (like high-brightness RGB LED boards), ensure your Flight Controller’s internal regulator can handle the cumulative current. For complex setups with an airspeed sensor and external GPS/Compass, the ReadytoSky Splitter is the cleanest way to keep your wiring loom organized and "pro-tier" in appearance!

Partsbaba Quality Commitment: All ReadytoSky accessories are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can expand your autonomous system with total peace of mind.

Only 1 items left

Low Voltage Servo Signal Reverser

From ₹ 228.84

₹ 196.19 each

In stock

High Voltage Servo Signal Reverser

From ₹ 269.18

₹ 235.48 each

In stock

180 Servo Expander

₹ 340.61

In stock

25T 37mm Metal Servo Motor Horn Half Arm Red

From ₹ 188.60

Out of stock

25T 31mm Metal Servo Motor Horn Arm Red

From ₹ 319.80

Only 1 items left

Airgates for Drone Racing and FPV Training - Collapsible, Lightweight and Durable

₹ 3,085.00

Gemfan FPV Racing Airgate – High-Visibility Orange (1 Piece)

Product Description

The Gemfan Orange Airgate is a professional-grade track obstacle designed specifically for FPV pilots and drone racing enthusiasts. Whether you are setting up a competitive course or practicing in your backyard, this airgate provides a clear, high-visibility target for high-speed passes. Constructed with flexible, collapsible fiberglass poles, the gate is engineered to withstand the inevitable impacts of drone racing while remaining stable in outdoor conditions.

The gate features a dual-sided design, allowing pilots to customize the track's difficulty level. Its lightweight and highly portable structure makes it an essential tool for racing clubs and solo pilots alike; it can be deployed in minutes and folds down into a compact carrying size for easy transport to any flight location.

Key Features

High-Visibility Orientation: The vibrant orange finish ensures that FPV pilots can maintain a clear line of sight and orientation even at extreme speeds or in low-light environments.
Dual-Size Configuration: Designed with different gate side sizes to allow for adjustable difficulty levels, catering to everyone from beginners to pro-class racers.
Durable Fiberglass Support: Utilizes collapsible fiberglass poles that offer the perfect balance of rigidity and flexibility, minimizing damage to both the gate and the drone during collisions.
Portable & Collapsible: Features an easy-to-fold design that packs down into a slim 53cm package, making it ideal for travel and quick field setups.
All-Terrain Versatility: Rugged materials make it suitable for a variety of environments, including indoor sports halls, grassy fields, or stadiums.

Technical Specifications

Brand: Gemfan
Gate Type: Racing Airgate
Setup Dimensions: 150 x 150 x 120 cm
Folded Package Size: 12 x 12 x 53 cm
Pole Material: Collapsible Fiberglass
Fabric Material: Durable Lightweight Synthetic
Weight: 0.8 kg
Color: High-Visibility Orange

Package Includes

1 x Gemfan Racing Airgate (Orange)
1 x Set of Collapsible Fiberglass Poles
1 x Carrying/Storage Bag

Warranty Information

All products supplied by Partsbaba are genuine and original. We offer a 14-day replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

In stock

Stack Saver Protective Tape for FPV Drones

From ₹ 219.48

Gemfan Stack Saver / Protective Tape – (2.5 x 18cm)

Product Description

The Gemfan Stack Saver is a specialized protective accessory designed to safeguard the "heart" of your FPV drone—the electronics stack. In high-performance FPV flying, vibrations and physical impacts can lead to loose connections, damaged solder joints, or stack misalignment. This durable strap acts as a reinforcement layer, providing consistent compression to keep your Flight Controller (FC), ESC, and VTX firmly seated and protected from dust and debris.

Measuring 18cm in length, it is perfectly sized to wrap around standard 20x20mm and 30x30mm stacks. Whether you are building a rugged 5-inch freestyle quad or a compact Cinewhoop, the Gemfan Stack Saver adds a critical layer of defense, ensuring your electronics stay secure during aggressive maneuvers and inevitable hard landings.

Key Features

Secure Stack Reinforcement: Specifically designed to compress and hold together multi-level electronics stacks, preventing component shifting during high-G maneuvers.
Vibration Dampening: Helps absorb micro-vibrations that can affect gyro performance, leading to a smoother tune and more stable flight.
Protective Barrier: Functions as a dust cover and protective shield, keeping grass, dirt, and prop-wash debris away from sensitive PCB components.
High-Tenacity Material: Built from durable, anti-slip fabric that resists wear and tear even after repeated tightening and removal.
Solder Joint Protection: By minimizing the independent movement of stack layers, it significantly reduces mechanical stress on delicate wiring and solder points.
Universal Fit: The 2.5cm width and 18cm length make it a versatile fit for a wide variety of FPV frames and stack heights.

Technical Specifications

Brand: Gemfan
Product Name: Stack Saver / Protective Tape
Dimensions: 2.5 x 18 cm
Compatibility: 2-inch to 7-inch FPV Drones (20x20 & 30x30 Stacks)
Function: Compression, Dust Protection, and Vibration Reduction
Material: High-Strength Synthetic Fiber
Color: Black (Standard)

Package Includes

1 x Gemfan Stack Saver Strap (2.5 x 18 cm)

Warranty Information

All products supplied by Partsbaba are genuine and original. We offer a 14-day replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

In stock