RF Antenna

The 2.4 GHz antenna with a 3 dB gain and SMA female connector is designed for reliable wireless communication applications. Its black finish ensures a discreet appearance while supporting strong signal transmission within the 2.4 GHz frequency band. Compatible with a wide range of devices featuring SMA male connectors, this antenna is ideal for enhancing connectivity in networking, IoT, and radio communication setups.

• 3 dB gain delivers improved signal strength and range for 2.4 GHz wireless networks
• SMA female connector ensures secure and versatile attachment to devices with SMA male ports
• Compact black design blends seamlessly into various environments without drawing attention
• Optimized for use with Wi-Fi, Bluetooth, and other 2.4 GHz frequency-based systems
• Lightweight and durable construction supports long-term deployment in indoor and outdoor settings
• Enhances performance in Internet of Things (IoT) devices and wireless communication modules

This 2.4 GHz antenna with an IPX/IPEX cable is designed to enhance WiFi signal strength and reliability. Ideal for integration into various wireless devices, this component supports stable connectivity in the 2.4 GHz frequency range. Its compact design and flexible cable compatibility make it a practical choice for improving wireless performance in routers, IoT devices, and other network-enabled electronics.

• Optimized for 2.4 GHz frequency, ensuring consistent WiFi signal reception and transmission.
• Equipped with IPX/IPEX connector cable for easy installation and compatibility with a wide range of wireless modules.
• Compact form factor fits seamlessly into tight spaces without compromising antenna performance.
• Durable construction designed to maintain stable connections in various indoor environments.
• Versatile application suitable for routers, access points, IoT gadgets, and embedded wireless systems.
• Improves network coverage by boosting signal strength and reducing interference.

The 2.4 GHz 4DB WiFi Omnidirectional Antenna with IPEX/IPX connectors is designed to enhance wireless communication by providing consistent signal coverage in all directions. Ideal for various electronic components, this antenna offers reliable performance for devices operating on the 2.4 GHz frequency band. Its compact design and high gain make it suitable for improving WiFi connectivity in applications requiring stable and broad signal distribution.

• Omnidirectional design ensures uniform signal strength across a 360-degree range for extensive coverage.
• 4 dB gain boosts wireless reception and transmission efficiency without increasing power consumption.
• Compatible with devices featuring IPEX/IPX connectors, simplifying integration into existing hardware setups.
• Optimized for the 2.4 GHz frequency band, supporting common WiFi and wireless protocols for versatile use.
• Compact form factor fits easily into tight spaces without compromising signal quality.
• Durable construction designed for continuous operation in various environments.

This 433 MHz antenna is designed for reliable wireless communication across various applications requiring a 3 dB gain. Its straight form factor and compact 5 cm length make it ideal for installations with limited space. Featuring an SMA male connector, this antenna is compatible with a wide range of devices and components that operate on the 433 MHz frequency band, delivering consistent signal performance.

• 3 dB gain enhances signal strength for more stable wireless connections
• The 5 cm straight design fits neatly into tight spaces without compromising performance
• SMA male connector ensures easy and secure attachment to compatible devices
• Optimized for the 433 MHz frequency range, widely used in remote controls, sensors, and IoT devices
• Constructed to deliver consistent signal quality in various environments
• Compact size supports versatile mounting options for different applications

The AN9520-245 2.4GHz Rainsun Ceramic Chip Antenna is designed for reliable wireless connectivity in compact electronic devices. This omnidirectional antenna operates at 2.4GHz, supporting Bluetooth and WiFi applications. Its compact 9mm size makes it ideal for use in space-constrained environments, delivering consistent signal quality across a broad range of devices and components.

• Omnidirectional design ensures uniform signal reception and transmission over 360 degrees
• Compact 9mm form factor fits easily into tight spaces without compromising performance
• Compatible with standard Bluetooth and WiFi protocols operating at 2.4GHz frequency
• Ceramic construction provides durability and stable electrical characteristics
• Ideal for integration in various components requiring wireless communication capabilities
• Optimized to maintain consistent performance in diverse application environments

The GSM Antenna with an SMA connector measures 5cm (approximately 2 inches) and is designed specifically for 3G applications. This compact antenna enhances cellular signal reception, making it ideal for integration into communication devices and embedded systems requiring reliable 3G network connectivity. Its durable construction and standard SMA interface ensure broad compatibility with various GSM modules and devices, providing a stable and efficient wireless connection for diverse applications.

• Compact 5cm length enables easy installation in tight spaces without compromising signal quality
• SMA connector offers universal compatibility with most GSM and 3G communication hardware
• Optimized for 3G networks, ensuring strong and stable cellular signal reception
• Lightweight design minimizes impact on device portability and form factor
• Robust construction supports reliable performance in various environmental conditions
• Ideal for use in embedded systems, IoT devices, and cellular communication modules

The RG178 RF coaxial cable is a high-quality component designed for efficient signal transmission with a characteristic impedance of 50 ohms. Measuring 1 meter in length and featuring a compact diameter of 1.8mm, this cable is ideal for use in RF applications requiring reliable performance and minimal signal loss. Its versatile design makes it suitable for connecting radio frequency equipment, antennas, and other electronic devices where precise impedance matching is crucial.

• 50 ohm impedance ensures optimal compatibility with most RF systems and devices.
• 1.8mm diameter offers a compact and flexible solution for tight installations.
• 1 meter length provides a practical balance between reach and signal integrity.
• Durable construction supports consistent performance in various environments.
• Designed specifically for radio frequency transmissions to minimize interference.
• Ideal for use with antennas, test equipment, and RF communication devices.

The RF Antenna Connector, featuring surface-mount device (SMD) design, is engineered for seamless integration with IPX, IPEX, U.LF, and MHF standards. This compact connector is ideal for high-frequency wireless communication devices, providing reliable signal transmission in tight spaces. Its compatibility with various antenna types ensures versatile applications in modern electronics, supporting efficient RF performance and connectivity in demanding environments.

• Surface-mount design facilitates easy installation on compact circuit boards without sacrificing performance.
• Multi-standard compatibility with IPX, IPEX, U.LF, and MHF interfaces broadens potential device applications.
• Optimized for high-frequency signals to maintain integrity and reduce loss in wireless communication systems.
• Compact form factor supports space-saving layouts in mobile and embedded devices.
• Durable construction ensures consistent connection quality under typical operating conditions.
• Ideal for modern RF components, enabling efficient antenna connectivity in diverse electronic products.

The SMA Hex Nut and Washer Set is a durable components kit designed for secure fastening in various mechanical and construction applications. This set includes precision-engineered hex nuts paired with washers to ensure stability and prevent loosening under vibration. Compatible with standard SMA connectors and hardware, it is ideal for projects requiring reliable and long-lasting assembly solutions.

• Hex nuts crafted for strong grip to maintain fastening integrity under stress
• Washers included to distribute pressure evenly and protect surfaces from damage
• Engineered for compatibility with SMA connectors and related hardware systems
• Designed to resist loosening even in environments with vibration or mechanical movement
• Made from premium materials for corrosion resistance and extended lifespan

The SMA Female PCB Edge Mount - SMA-KE is a precision component designed for secure RF connections on printed circuit boards with a thickness of 1.2mm. This connector facilitates reliable signal transmission in compact electronic devices, ensuring compatibility with standard SMA male connectors. Its edge-mount design allows for efficient integration in densely packed circuit layouts, making it ideal for telecommunications, wireless communication systems, and other RF applications requiring stable and high-frequency connections.

• Edge mount design optimized for easy installation on 1.2mm thick PCBs, saving space in tight assembly conditions
• Female SMA interface ensures dependable coupling with SMA male connectors for consistent RF performance
• Engineered for high-frequency signal integrity in demanding electronic environments
• Compact form factor supports use in diverse applications including telecommunications and wireless devices
• Manufactured to meet industry standards for durability and electrical reliability
• Compatible with a wide range of PCB layouts, enhancing design flexibility

The SMA Female PCB Edge Mount connector (model SMA-KE) is designed for reliable RF connections on printed circuit boards measuring 1.6mm in thickness. This component ensures secure signal transmission and is ideal for applications requiring high-frequency connectivity. Its edge mount design simplifies integration into compact electronics, delivering consistent performance across various communication and measurement devices.

• Precision engineering guarantees stable RF signal integrity for sensitive electronic circuits.
• Compatible with printed circuit boards specifically sized at 1.6mm thickness for seamless installation.
• Edge mount configuration reduces space requirements, optimizing board layout and component density.
• Durable SMA female interface ensures lasting mechanical and electrical connection reliability.
• Perfectly suited for high-frequency applications such as wireless communication and test equipment.
• Constructed to maintain consistent performance under varied environmental conditions.

The SMA Male Wire Solder connector with RG178 cable and SMA-1.5 thread provides a reliable, precision connection solution for RF applications. Designed for stable signal transmission, it supports a 50-ohm impedance, making it suitable for use in communication devices, test equipment, and antenna systems. Its durable construction ensures long-lasting performance in demanding technical environments.

• Compatible with RG178 cable for flexible and streamlined installations
• SMA-1.5 threaded design ensures secure and tight coupling
• 50-ohm impedance ideal for high-frequency signal integrity
• Robust solder connection provides reliable electrical contact
• Compact form factor suitable for space-constrained setups
• Engineered for RF components requiring precise connectivity

The SMA Female R/A connector is a precision component designed for seamless RF signal transmission in tight or compact spaces. Featuring a right-angle design, it optimizes cable routing and minimizes strain on connections. Compatible with SMA-type male connectors, this component is ideal for applications in telecommunications, wireless systems, and test equipment where reliable signal integrity and space efficiency are essential.

• Right-angle configuration enables efficient cable management in confined areas without compromising performance
• Engineered to provide a secure and stable connection with standard SMA male counterparts
• Constructed for high-frequency applications, ensuring minimal signal loss and excellent conductivity
• Compact design supports versatile use in telecommunications, antenna systems, and RF testing setups
• Durable materials enhance longevity and resistance to wear in demanding environments
• Simplifies installation where straight connectors are impractical due to space constraints

The SMA to IPX/IPEX/uFL/u.FL RF Adapter Cable is a 22cm connector cable designed for seamless signal transmission between devices with different RF interface types. This cable facilitates reliable connections in wireless communication setups by linking SMA connectors to smaller RF connectors like IPX, IPEX, or u.FL. Its compact length and durable build make it ideal for tight spaces and applications requiring secure RF connectivity, such as IoT devices, routers, and embedded wireless modules.

• 22cm cable length offers flexibility for compact installations without signal loss
• Compatible with SMA connectors on one end and IPX/IPEX/u.FL connectors on the other, supporting multiple device interfaces
• Constructed to maintain stable RF signal integrity across connections
• Designed for use in wireless communication systems, including routers, IoT devices, and embedded modules
• Compact and lightweight design simplifies integration in confined spaces
• Enables easy adaptation between different RF connector types without soldering or modification

The Bluetooth Antenna SMD 2450AT18A100E-AEC is a compact surface-mount device designed to enhance wireless communication in electronic systems. Engineered for 2.4 GHz frequency applications, this antenna supports Bluetooth connectivity, providing reliable signal transmission with minimal interference. Its SMD design ensures seamless integration into compact circuit boards, making it ideal for use in various consumer electronics, IoT devices, and wireless communication modules.

• Optimized for 2.4 GHz frequency, ensuring strong Bluetooth signal performance.
• Surface-mount package allows for efficient, space-saving installation on printed circuit boards.
• Built to meet AEC standards, delivering durability and reliability in automotive and industrial environments.
• Compact design supports versatile applications in consumer electronics and IoT devices.
• Engineered for low interference to maintain stable wireless connectivity.
• Compatible with a wide range of Bluetooth-enabled systems requiring integrated antenna solutions.

The IPEX RF Antenna Cable with a 15cm length features a solderable silver-dipped end, designed for efficient connections to antennas and printed circuit boards. This trimmed cable ensures easy soldering, making it ideal for various RF applications requiring reliable, compact wiring solutions. Its precise construction supports secure signal transmission in wireless communication devices and other electronic components.

• 15cm cable length provides a compact and manageable connection in tight spaces.
• Silver-dipped solderable end allows straightforward and durable soldering to antennas and PCBs.
• Trimmed and prepared for immediate use, saving time during assembly.
• Compatible with a wide range of RF components, enhancing signal integrity.
• Ideal for wireless communication setups and custom electronics projects.

The red dust cap for SMA RF connectors is designed to protect sensitive RF components from dust, dirt, and damage during storage or transport. Crafted to fit securely on SMA connectors, this cap preserves connector integrity and ensures optimal performance. Ideal for use in telecommunications and RF applications, it helps maintain signal quality by preventing contamination. Its durable design and compatibility with standard SMA connectors make it an essential accessory for RF maintenance and installation tasks.

• Vivid red color for easy identification and organization of RF connectors
• Precisely molded to fit SMA RF connectors snugly, preventing dust infiltration
• Protects delicate connector surfaces from scratches and environmental damage
• Lightweight and compact, adding minimal bulk during storage or transport
• Compatible with a wide range of SMA connectors used in RF systems and devices
• Enhances longevity and reliability of RF connections by maintaining cleanliness

The SMA Male Right Angle connector is a precision component designed to optimize signal transmission in RF applications. Its right-angle design facilitates space-saving installations where linear connectors might be impractical. This connector is compatible with a variety of coaxial cables, making it a versatile choice for use in communication equipment, antennas, and test instruments. Engineered for durability and reliable electrical performance, it ensures strong connectivity in compact setups.

• Right-angle configuration allows for efficient cable routing in tight spaces without compromising signal integrity
• Constructed to provide consistent impedance matching for reduced signal reflection and loss
• Compatible with standard SMA male connectors, ensuring broad interoperability across devices
• Ideal for applications requiring secure RF connections such as wireless communication systems and antenna assemblies
• Built with durable materials to withstand mechanical stresses and maintain long-term performance
• Compact size enhances installation flexibility in equipment with limited clearance

Adapts RF/GPS/GSM module's small antenna connector to bigger SMA antenna

The SMA Male Vertical connector is a precision component designed for reliable RF and microwave signal transmission. It serves as a durable interface for attaching coaxial cables vertically to devices or circuit boards, ensuring a stable connection in compact setups. This connector is ideal for applications requiring consistent performance in telecommunications, instrumentation, and wireless systems. Constructed to meet stringent industry standards, it supports seamless integration with SMA-compatible equipment, promoting efficient signal integrity.

• Vertical orientation optimizes space-saving installation in tight equipment layouts
• Standard SMA male threading guarantees compatibility with a wide range of coaxial cables and devices
• High-quality metal construction offers robust durability and excellent conductivity
• Precision engineering ensures minimal signal loss and reliable RF performance
• Compact design simplifies integration into dense electronic assemblies
• Widely used in telecommunications and wireless networks for consistent signal connections
• Corrosion-resistant finish enhances longevity in varied operating environments

The SMA Male edge mount connector is designed specifically for 1.6mm thick printed circuit boards, providing a secure and reliable RF connection. Its robust design ensures stable signal transmission in a compact form factor, making it an ideal choice for high-frequency applications. Compatible with standard SMA connectors, this component is perfect for use in communications equipment, test instruments, and wireless devices requiring precise and durable RF interfacing.

• Tailored for 1.6mm thick PCBs, ensuring a precise and firm edge mount fit
• Male SMA interface supports high-frequency signals with minimal loss
• Compact design optimizes space on densely populated circuit boards
• Constructed for dependable mechanical and electrical performance in demanding environments
• Ideal for wireless communication systems, RF test setups, and antenna connections
• Compatible with a wide range of SMA female connectors for versatile integration

Useful for mounting in PCB to connect external RF antenna, Gold Plated, PCB Mount

Replacement set for Bulkhead Nut for RP-SMA & SMA, Usually used to mount these connectors on a enclosure panel.

The SMA Male PCB Edge Mount connector is designed for reliable RF signal transmission on printed circuit boards with a thickness of 1.2mm. Featuring a robust SMA male interface, this component ensures secure connectivity for high-frequency applications. Its edge mount configuration enables straightforward installation on PCB edges, making it ideal for compact electronic devices requiring consistent performance. Compatible with standard SMA connectors, it suits applications across telecommunications, wireless systems, and instrumentation.

• Optimized for 1.2mm PCB thickness to deliver stable and precise mounting on circuit board edges
• SMA male interface provides secure and low-loss connections for RF signal integrity
• Edge mount design facilitates easy integration in tight spaces without compromising board layout
• Durable construction ensures long-lasting performance in demanding electronic environments
• Broad compatibility with standard SMA female connectors across various communication devices
• Suitable for high-frequency applications including wireless communication and test equipment

The yellow dust cap for SMA RF connectors offers essential protection against dust, dirt, moisture, and other contaminants. Crafted from durable, flexible silicone and rubber materials, this cap ensures a secure fit on compatible SMA connectors. Its vibrant yellow color facilitates easy identification during installation and maintenance, making it well-suited for use in RF equipment, antennas, communication systems, and laboratory settings.

• Flexible silicone and rubber construction provides long-lasting durability and reliable protection.
• Bright yellow finish enhances visibility for quick identification during setup and servicing.
• Snug fit maintains cleanliness and prevents contamination of SMA RF connectors.
• Lightweight and reusable design allows easy installation and removal without the need for tools.
• Resistant to environmental wear and cracking for extended service life in various conditions.
• Ideal for diverse applications including test instruments, antennas, telecom, and electronics projects.
• Protects connectors during storage, transport, and periods of inactivity to ensure consistent signal quality.