Drone Connectors

Readytosky XT60 Connector Pair (Male & Female) – High-Current Power Interface

Ensure a rock-solid power foundation for your FPV drone, RC aircraft, or DIY robotics project with the Readytosky XT60 Connector Set. Widely regarded as the industry standard for mid-to-high power applications, these connectors are engineered to provide a secure, low-resistance path between your LiPo battery and your Power Distribution Board (PDB) or ESC.

Molded from high-temperature nylon, the XT60 is designed to maintain its structural integrity even during high-heat soldering or intense current draws. The gold-plated spring connectors ensure maximum surface contact, preventing the voltage drops and loose connections that can lead to catastrophic flight failures.

Key Highlights:

• High-Amp Reliability: Engineered to handle over 60A of continuous current without overheating, making them the perfect match for powerful brushless motor setups.

• Heat-Resistant Nylon: The robust housing prevents the connector from melting or deforming during the soldering process or under heavy electrical loads.

• Non-Reversible Design: The asymmetrical shape prevents accidental reverse-polarity connections, protecting your expensive flight controllers and ESCs from short circuits.

• Gold-Plated Precision: Features premium gold-plating on the internal bullet connectors to minimize resistance and maximize electrical efficiency.

• Universal Compatibility: The "Must-Have" connector for 3S to 6S LiPo batteries and standard F450, 250mm, and racing drone frames.

Technical Specifications

Pro-Tip for Builders:

When soldering these connectors, it is always best to plug the male and female ends together first. This helps act as a heat sink and ensures the pins stay perfectly aligned even if the plastic softens slightly from the soldering iron.

Partsbaba Quality Commitment: All Readytosky connectors are 100% genuine and original. We provide a 14-day replacement warranty against manufacturing defects, ensuring your high-power connections are safe and reliable from day one.

Readytosky XT90 Connector Set (Male & Female) – High-Current Heavy Duty Interface

Power your high-performance RC builds with the Readytosky XT90 Connector Set. Engineered for large-scale drones, high-voltage multicopters, and heavy-duty RC vehicles, the XT90 is the industry standard for systems that demand massive current delivery without the risk of heat-related failure.

Molded from high-temperature, flame-retardant nylon, these connectors feature 4.5mm gold-plated bullet pins that ensure maximum surface contact and minimal resistance. Whether you are running a 6S racing rig or an industrial-grade cinelifter, the XT90 provides the secure, "clatter-free" connection required for high-vibration environments.

Key Highlights:

• Massive Current Capacity: Built to handle a constant 90A current with burst capabilities up to 120A, making them ideal for high-torque brushless motors and large LiPo packs.

• Easy-Solder Design: The pins feature a "half-cup" soldering terminal, making it significantly easier to secure thick gauge wires (up to 10AWG) for a professional, low-resistance joint.

• Spark-Resistant Geometry: Designed with deep-recessed terminals to prevent accidental short circuits and provide a tight, friction-locked fit that won't vibrate loose during flight.

• Polarity Protection: The distinct asymmetrical housing ensures that it is physically impossible to plug your battery in backward, protecting your ESCs and flight controllers from catastrophic reverse-polarity damage.

• Premium Conductivity: High-grade 4.5mm gold plating prevents oxidation over time, ensuring your power delivery remains consistent even after hundreds of plug cycles.

Technical Specifications

Pro-Builder Tip:

Because the XT90 handles such high current, we recommend using high-quality 10AWG or 12AWG silicone wire. Always use heat shrink tubing over the soldered terminals to ensure total insulation against the carbon fiber frames of your drone.

Partsbaba Quality Assurance: All Readytosky connectors are 100% genuine and original. We provide a 14-day replacement warranty against manufacturing defects, so you can build your high-power systems with complete confidence.

Readytosky APM/Pixhawk Power Module – Precision Voltage & Current Sensing

Give your flight controller a clean, reliable "heartbeat" with the Readytosky Power Module. Specially designed for the APM 2.6, 2.8, and Pixhawk series, this module serves a dual purpose: it acts as a high-efficiency switching regulator to power your electronics and a high-precision sensor to monitor your battery’s health in real-time.

By integrating a 5.3V switching regulator and a 90A current sensor into a single XT60-equipped unit, this module eliminates the need for messy external BECs and voltage dividers. It allows your flight controller to trigger "Low Battery" failsafes and monitor live mAh consumption, ensuring you never push your LiPo packs too far.

Key Highlights:

• Dual-Function Design: Simultaneously regulates power to your flight controller while sending precise voltage and current data to your OSD or telemetry link.

• High-Voltage Support: Safely handles up to 28V (6S LiPo), making it compatible with everything from small 3S trainers to heavy-lift 6S endurance rigs.

• Plug-and-Play for ArduPilot: Features a standard 6-pin DF13 cable that plugs directly into the "PM" port of your APM or Pixhawk—no soldering or custom mapping required.

• Robust 3A Output: The switching regulator provides a stable 5.3V at up to 3A, offering plenty of overhead to power your FC, GPS, and low-power telemetry modules.

• Factory Protected: The unit comes pre-wrapped in high-quality transparent shrink tubing to prevent accidental shorts against carbon fiber frames.

Technical Specifications

Installation Note:

The Power Module is designed only to power the flight controller, a receiver, and low-power accessories (GPS, Telemetry). It is not intended to power servos. If your aircraft uses servos, please use a separate BEC or ESC to power the output rail of your flight controller.

Partsbaba Quality Commitment: All Readytosky power modules are 100% genuine. We offer a 14-day replacement warranty against manufacturing defects, so you can fly with the confidence that your power system is rock solid.

ReadytoSky PPM Encoder V1.3 – High-Precision PWM to PPM Signal Converter

Simplify your flight controller wiring and resolve receiver compatibility issues with the ReadytoSky PPM Encoder V1.3. This essential module is designed for pilots using older PWM receivers (which use one wire per channel) with modern flight controllers like Pixhawk, APM, or Paparazzi that require a single-wire PPM input.

By encoding up to 8 individual PWM channels into a single, streamlined PPM composite signal, this encoder significantly reduces "cable clutter" and frees up valuable I/O ports on your autopilot. Housed in a protective plastic case, the V1.3 is pre-flashed and mission-ready out of the box.

Key Highlights:

• 8-Channel Signal Aggregation: Capable of reading up to 8 individual PWM input channels and merging them into one precise PPM output stream.

• Plug-and-Play Firmware: Comes pre-flashed with the latest stable firmware, requiring no complex software setup for standard UAV operations.

• Programmable & Customizable: Advanced users can re-flash the onboard ATmega328P via an AVR ISP programmer to invert PPM signals or adjust specific fail-safe values.

• Protective Hard Case: Includes a durable, lightweight enclosure that shields the sensitive electronics from dust, moisture, and mechanical stress during flight.

• Broad Autopilot Support: The industry-standard solution for connecting PWM-only receivers to Pixhawk 2.4.8, APM 2.8, and other modern 32-bit flight stacks.

• Low Latency Conversion: High-speed processing ensures that your control inputs remain responsive with minimal signal delay.

Technical Specifications

What’s in the Box:

• 1x PPM Encoder Module (with Case)

• 1x 10-pin Input Cable (PWM side)

• 1x 3-pin Output Cable (PPM side)

Pro-Builder Tip:

If you are transitioning to an autonomous flight stack like ArduPilot, using a PPM encoder is the most reliable way to maintain your current RC transmitter setup. Ensure that your receiver is powered through the encoder's input rail, and double-check your channel mapping in Mission Planner after the first connection to ensure all 8 channels are moving correctly!

Partsbaba Authenticity Guarantee: All ReadytoSky electronics are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can integrate this encoder into your UAV with complete confidence.

ReadytoSky I2C Splitter Hub with Cable – Essential Pixhawk/APM Expansion

Maximize the peripheral capacity of your flight stack with the ReadytoSky I2C Splitter Hub. Standard flight controllers like the Pixhawk or APM often come with a limited number of I2C ports, which can become a bottleneck when adding advanced sensors. This bus expansion module acts as a high-speed "power strip" for your data, allowing you to connect up to four additional I2C devices—such as external compasses, digital airspeed sensors, LED modules, or specialized laser rangefinders—using only a single port on your flight controller.

Crafted for reliability in high-vibration environments, the ReadytoSky splitter ensures stable data transmission across all connected nodes, making it a critical component for professional UAV builds and complex autonomous platforms.

Key Highlights:

• 4-Way Port Expansion: Instantly converts one I2C port into four, enabling the simultaneous use of multiple external sensors and accessories.

• Seamless Compatibility: Designed specifically for the Pixhawk (2.4.6/2.4.8) and APM 2.8 ecosystems, utilizing standard 4-pin JST-GH or DF13 style connections.

• Plug-and-Play Installation: Includes a pre-terminated 4-wire cable, allowing for immediate integration without the need for custom soldering or wiring harnesses.

• Ultralight & Compact: Measuring just 37mm x 18.3mm, this hub fits easily into tight frames and adds negligible weight to your aircraft's takeoff profile.

• Robust Data Bus: Features a high-quality PCB that maintains signal integrity across all four ports, preventing sensor dropouts during critical flight maneuvers.

Technical Specifications

Pro-Builder Tip:

When connecting multiple high-draw I2C peripherals (like high-brightness RGB LED boards), ensure your Flight Controller’s internal regulator can handle the cumulative current. For complex setups with an airspeed sensor and external GPS/Compass, the ReadytoSky Splitter is the cleanest way to keep your wiring loom organized and "pro-tier" in appearance!

Partsbaba Quality Commitment: All ReadytoSky accessories are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can expand your autonomous system with total peace of mind.