Visa

4pc M2x5+4 M2 Rubber Anti Vibration Damping Screws with Shock-absorbing Ring

From ₹ 253.00

Only 3 items left

1pc Dumping Rubber for APM PIX Glass Fiber Shock Absorber Blue

From ₹ 39.51

₹ 34.44 each

In stock

4Pcs Anti Vibration Rubber Balls Blue

From ₹ 119.06

Readytosky Anti-Vibration Gimbal Dampeners (4-Piece Set) – Eliminate "Jello" Effect

Achieve professional-grade, cinematic stability with the Readytosky Anti-Vibration Rubber Dampeners. Specifically engineered for gimbal mounting plates on DJI Phantom series drones and custom FPV camera rigs, these high-elasticity silicone balls act as a mechanical low-pass filter. By absorbing high-frequency motor vibrations and frame resonance, they effectively eliminate the "jello effect" in your video, ensuring buttery-smooth footage even during aggressive flight maneuvers.

These dampeners are the ideal balance between "soft" for vibration absorption and "firm" for structural support, making them a must-have for any aerial photography or videography platform.

Key Highlights:

Advanced Vibration Isolation: Effectively decouples the camera gimbal from the drone frame, neutralizing the micro-shakes that cause distorted or wavy video.
Precision Silicone Build: Crafted from durable, high-grade silicone that maintains its elasticity in both extreme cold and high-heat environments.
High Load Capacity: Each ball is rated to support between 120g and 180g, allowing a 4-piece set to easily stabilize a standard gimbal and action camera setup.
Ultralight Profile: At just 1.5g per unit, these dampeners provide maximum stabilization without impacting your drone’s center of gravity or flight time.
Standard Fitment: Designed with a 7mm inner diameter to fit most standard gimbal mounting holes found on DJI Phantom 2, 3, and various 3D-printed or carbon fiber mounts.

Technical Specifications

Feature	Details
Brand	Readytosky
Quantity	4 Pieces
Material	High-Elasticity Silicone
Color	Vibrant Blue
Dimensions	21mm (H) x 17mm (W)
Inner Diameter	7mm
Weight	1.5g per ball
Load Rating	120g – 180g (per ball)

Installation Pro-Tip:

For maximum security, especially on larger camera rigs, we recommend threading a small, loose-fitting zip tie through the center of the dampening balls. This acts as a "safety tether" to prevent the gimbal from separating from the frame in the event of a hard landing or extreme impact.

Partsbaba Quality Assurance: We only supply 100% genuine and original Readytosky components. Your purchase is protected by our 14-day replacement warranty against manufacturing defects. For full details on returns, please visit our support page.

Only 6 items left

4pc M2 Anti-vibration Rubber Shock Absorber Ball

From ₹ 110.80

Only 10 items left

4pc M3x7+4.5 M3 Rubber Anti Vibration Damping Screws with Shock-absorbing Ring

From ₹ 211.68

In stock

4Pcs M3 Anti-vibration Rubber Shock Absorber Ball Red 3x8mm

From ₹ 119.06

Readytosky M3x8mm Anti-Vibration Standoffs (4-Piece Set) – High-Performance FC Soft-Mounting

Eliminate high-frequency noise and mechanical resonance with the Readytosky M3x8mm Anti-Vibration Dampeners. These specialized "soft-mount" standoffs are engineered to isolate your flight controller and sensitive IMU (gyroscope) from the vibrations generated by high-speed motors and unbalanced propellers. By decoupling the "brain" of your drone from the frame, these dampeners significantly reduce D-term noise, leading to cooler motors and a much smoother, "locked-in" flight feel.

Molded from premium-grade red silica gel, these absorbers offer the perfect Shore hardness to filter out mid-to-high frequency oscillations that can cause "jello" in your video feed or erratic flight behavior.

Key Highlights:

Precision Gyro Isolation: Specifically designed to fit standard M3 mounting holes, providing a clean, vibration-free platform for stackable flight controllers and ESCs.
Premium Silica Gel Construction: The durable yet flexible red silicone effectively dissipates energy, preventing mechanical "noise" from reaching your flight controller's sensors.
Compact M3x8mm Profile: Sized perfectly for tight racing drone builds (210mm–250mm) where vertical stack space is at a premium.
Enhanced Component Longevity: By absorbing the micro-shocks of flight and hard landings, these dampeners protect the delicate solder joints and SMD components on your PCBs.
High-Visibility Red: The vibrant red finish makes it easy to inspect your stack for wear while adding a professional, custom look to your build.

Technical Specifications

Feature	Details
Brand	Readytosky
Quantity	4 Pieces
Material	High-Grade Red Silica Gel
Thread Size	M3 (Standard)
Height	8mm
Application	Flight Controller / ESC Soft-Mounting
Compatibility	F3, F4, F7, and BLHeli_32 Stacks

Installation Pro-Tip:

When installing these, ensure your nuts or bolts are snug but not over-tightened. Crushing the silicone too much will limit its ability to flex and absorb vibrations, defeating the purpose of "soft-mounting." A firm, hand-tight fit is usually best for optimal dampening.

Partsbaba Quality Commitment: All Readytosky hardware is 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, ensuring your flight stack remains stable and secure from day one.

Only 19 items left

4pc M3 Anti-vibration Rubber Shock Absorber Ball

From ₹ 110.80

Only 14 items left

4Pcs M3 Shockproof Sponge Pad Black

From ₹ 110.80

Readytosky M3 Shockproof Landing Pads (4-Piece Set) – High-Density Vibration Isolation

Give your racing drone a softer touch with the Readytosky M3 Shockproof Sponge Pads. These ultralight, high-density landing pads are the perfect alternative to heavy plastic or metal landing gear. Specifically designed for mini quads ranging from 180mm to 300mm, they provide a critical "crumple zone" that absorbs the kinetic energy of hard landings, protecting your carbon fiber frame and sensitive internal electronics from stress fractures.

Beyond landing protection, these pads feature a genuine 3M adhesive backing, making them dual-purpose: they can also be used as vibration-dampening mounts for flight controllers and gyros to ensure ultra-stable flight telemetry.

Key Highlights:

Superior Impact Absorption: Engineered to dampen the shock of fast, aggressive landings, significantly extending the life of your motor bolts and arm tips.
Ultralight Performance: Designed for FPV racing and freestyle, these pads add virtually zero weight, ensuring your quad remains agile and responsive.
Industrial-Grade 3M Adhesive: The pre-applied 3M backing provides a permanent, vibration-resistant bond to carbon fiber, plastic, or aluminum surfaces.
Anti-Static & Protective: The specialized sponge material helps prevent static buildup and keeps your frame slightly elevated off damp or dusty surfaces.
Universal Mini-Quad Fit: A perfect fit for the ZMR250, QAV210, QAV-R 220, and FPV racing frames. Simply peel and stick to the underside of your motor mounts.

Technical Specifications

Feature	Details
Brand	Readytosky
Quantity	4 Pieces
Material	High-Density Shockproof Sponge
Adhesive	Genuine 3M Heavy-Duty Tape
Compatibility	180mm – 300mm Frames (ZMR, QAV, etc.)
Application	Landing Gear / Gyro Mounting / Vibration Isolation

Installation Pro-Tip:

Before applying, clean the bottom of your drone's carbon fiber arms with a little isopropyl alcohol. This ensures the 3M adhesive creates a maximum-strength bond that won't peel off during high-speed slides or grass landings.

Partsbaba Quality Assurance: We only supply 100% genuine Readytosky accessories. Your purchase is protected by our 14-day replacement warranty against manufacturing defects. For full details on our returns policy, please visit our support page.

Only 1 items left