Visa

₹ 68.00

Readytosky M3 Shockproof Landing Pads (4-Piece Set) – High-Density Vibration Isolation

Give your racing drone a softer touch with the Readytosky M3 Shockproof Sponge Pads. These ultralight, high-density landing pads are the perfect alternative to heavy plastic or metal landing gear. Specifically designed for mini quads ranging from 180mm to 300mm, they provide a critical "crumple zone" that absorbs the kinetic energy of hard landings, protecting your carbon fiber frame and sensitive internal electronics from stress fractures.

Beyond landing protection, these pads feature a genuine 3M adhesive backing, making them dual-purpose: they can also be used as vibration-dampening mounts for flight controllers and gyros to ensure ultra-stable flight telemetry.

Key Highlights:

Superior Impact Absorption: Engineered to dampen the shock of fast, aggressive landings, significantly extending the life of your motor bolts and arm tips.
Ultralight Performance: Designed for FPV racing and freestyle, these pads add virtually zero weight, ensuring your quad remains agile and responsive.
Industrial-Grade 3M Adhesive: The pre-applied 3M backing provides a permanent, vibration-resistant bond to carbon fiber, plastic, or aluminum surfaces.
Anti-Static & Protective: The specialized sponge material helps prevent static buildup and keeps your frame slightly elevated off damp or dusty surfaces.
Universal Mini-Quad Fit: A perfect fit for the ZMR250, QAV210, QAV-R 220, and FPV racing frames. Simply peel and stick to the underside of your motor mounts.

Technical Specifications

Feature	Details
Brand	Readytosky
Quantity	4 Pieces
Material	High-Density Shockproof Sponge
Adhesive	Genuine 3M Heavy-Duty Tape
Compatibility	180mm – 300mm Frames (ZMR, QAV, etc.)
Application	Landing Gear / Gyro Mounting / Vibration Isolation

Installation Pro-Tip:

Before applying, clean the bottom of your drone's carbon fiber arms with a little isopropyl alcohol. This ensures the 3M adhesive creates a maximum-strength bond that won't peel off during high-speed slides or grass landings.

Partsbaba Quality Assurance: We only supply 100% genuine Readytosky accessories. Your purchase is protected by our 14-day replacement warranty against manufacturing defects. For full details on our returns policy, please visit our support page.

Only 1 items left

Aluminum Motor Bullet Cap Quick-release Wrench Black

₹ 281.00

Readytosky Aluminum Motor Nut Quick-Release Wrench – Essential Field Tool

Say goodbye to bulky pliers and stripped motor caps. The Readytosky Quick-Release Wrench is a precision-engineered multi-tool designed specifically for FPV drone pilots and RC hobbyists. Crafted from high-grade 6063 Aluminum, this lightweight yet incredibly durable tool allows you to swap propellers or tighten motor nuts in seconds, even at the flight line.

Whether you're flying 2204, 2205, or high-performance RS series motors, this dual-sided wrench provides the perfect leverage without damaging your motor's finish.

Key Highlights:

3-in-1 Universal Compatibility: Expertly machined to fit M3, M4, and M5 hex nuts, making it compatible with the vast majority of mini-quad and racing drone motors.
Dual-Sided Precision: One end is dedicated to M5 and M4 prop nuts, while the flip side is tailored for M3 hardware—eliminating the need to carry multiple heavy sockets.
Ergonomic Quick-Release: The slim, flat profile provides excellent grip and leverage, allowing for rapid "one-twist" tightening and loosening of bullet-style motor caps.
Aircraft-Grade Construction: Built from 6063 Aluminum, offering a perfect balance of high tensile strength and ultralight portability.
Pocket-Sized Convenience: Its compact, flat design slides easily into a battery strap or transmitter case, ensuring you're never stranded by a loose prop.

Technical Specifications

Feature	Details
Brand	Readytosky
Material	6063 Aluminum Alloy
Supported Sizes	M3, M4, M5 Hex Nuts
Color	Sleek Black Anodized
Compatibility	2204, 2205, 2206, 2306, and RS Series Motors
Weight	Ultralight (Tool-kit optimized)

Why Every Pilot Needs One:

Traditional wrenches are often too thick to fit between the propeller blades and the motor bell. This specialized tool's thin profile ensures you can reach the nut easily, preventing the accidental "slip" that can lead to cut fingers or scratched motor magnets.

Partsbaba Quality Assurance: We only supply 100% genuine and original Readytosky tools. Your purchase is protected by our 14-day replacement warranty against manufacturing defects. For more details on our policies, please visit our returns page.

Only 5 items left

GPS Foldable Holder Bracket Stand Base Antenna Black for 7M 8N

₹ 258.00

ReadytoSky Foldable GPS Antenna Mount – Precision Stability for Long-Range UAVs

Protect your GPS signal and improve flight safety with the ReadytoSky Foldable GPS Bracket. Specifically designed to isolate your GPS module from the electromagnetic interference (EMI) generated by your drone's power distribution board and motors, this high-clearance stand ensures your flight controller achieves a faster, more stable satellite lock.

Crafted from a blend of lightweight aluminum and durable composite materials, this mount features a fold-down mechanism that allows for easy transport and storage without requiring you to disassemble your GPS wiring. It is the gold standard for APM, Pixhawk, and MultiWii builds where GPS accuracy is mission-critical.

Key Highlights:

Interference Reduction: By elevating your GPS/Magnetometer module away from high-current ESCs and motors, you significantly reduce "toilet bowling" and magnetic interference.
Universal Compatibility: Optimized for all standard GPS pucks, including the Ublox NEO-6M, M7N, M8N, and M10 series used in APM and Pixhawk ecosystems.
Rugged Foldable Design: The sturdy pivot joint allows the antenna to be folded flat against the frame during transit, then locked securely in an upright position for flight.
Precision CNC Components: Features a high-quality aluminum base and mounting plate for a vibration-free, secure attachment to your multirotor or quadcopter frame.
Lightweight Geometry: Engineered to provide maximum height and stability with minimal impact on your drone's overall takeoff weight.

Technical Specifications

Feature	Details
Brand	ReadytoSky
Material	CNC Aluminum & Carbon/Composite Rod
Design	Foldable / Collapsible
Compatibility	Ublox 6M, 7M, 8N, M10 & compatible GPS pucks
Application	APM, Pixhawk, MWC, and DJI-style builds
Color	Black

Pro-Builder Tip:

For the best results, use a small drop of blue thread-locker on the base mounting screws. This prevents the vibrations of the motors from loosening the bracket over time, ensuring your GPS stays perfectly level—which is vital for accurate "Position Hold" and "Auto Mission" modes!

Partsbaba Authenticity Guarantee: All ReadytoSky accessories supplied are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, helping you navigate with total confidence.

In stock

PPM Encoder V1.3 with Case

₹ 748.00

ReadytoSky PPM Encoder V1.3 – High-Precision PWM to PPM Signal Converter

Simplify your flight controller wiring and resolve receiver compatibility issues with the ReadytoSky PPM Encoder V1.3. This essential module is designed for pilots using older PWM receivers (which use one wire per channel) with modern flight controllers like Pixhawk, APM, or Paparazzi that require a single-wire PPM input.

By encoding up to 8 individual PWM channels into a single, streamlined PPM composite signal, this encoder significantly reduces "cable clutter" and frees up valuable I/O ports on your autopilot. Housed in a protective plastic case, the V1.3 is pre-flashed and mission-ready out of the box.

Key Highlights:

8-Channel Signal Aggregation: Capable of reading up to 8 individual PWM input channels and merging them into one precise PPM output stream.
Plug-and-Play Firmware: Comes pre-flashed with the latest stable firmware, requiring no complex software setup for standard UAV operations.
Programmable & Customizable: Advanced users can re-flash the onboard ATmega328P via an AVR ISP programmer to invert PPM signals or adjust specific fail-safe values.
Protective Hard Case: Includes a durable, lightweight enclosure that shields the sensitive electronics from dust, moisture, and mechanical stress during flight.
Broad Autopilot Support: The industry-standard solution for connecting PWM-only receivers to Pixhawk 2.4.8, APM 2.8, and other modern 32-bit flight stacks.
Low Latency Conversion: High-speed processing ensures that your control inputs remain responsive with minimal signal delay.

Technical Specifications

Feature	Details
Brand	ReadytoSky
Model	PPM Encoder V1.3
Processor	ATmega328P
Input Channels	8 PWM Channels
Output	Single PPM Composite
Firmware	Pre-flashed (v2.3.16 or compatible)
Case Material	High-Grade Plastic
Dimensions	28mm x 27mm x 9mm (with case)

What’s in the Box:

1x PPM Encoder Module (with Case)
1x 10-pin Input Cable (PWM side)
1x 3-pin Output Cable (PPM side)

Pro-Builder Tip:

If you are transitioning to an autonomous flight stack like ArduPilot, using a PPM encoder is the most reliable way to maintain your current RC transmitter setup. Ensure that your receiver is powered through the encoder's input rail, and double-check your channel mapping in Mission Planner after the first connection to ensure all 8 channels are moving correctly!

Partsbaba Authenticity Guarantee: All ReadytoSky electronics are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can integrate this encoder into your UAV with complete confidence.

In stock

I2C Splitter

₹ 256.47

ReadytoSky I2C Splitter Hub with Cable – Essential Pixhawk/APM Expansion

Maximize the peripheral capacity of your flight stack with the ReadytoSky I2C Splitter Hub. Standard flight controllers like the Pixhawk or APM often come with a limited number of I2C ports, which can become a bottleneck when adding advanced sensors. This bus expansion module acts as a high-speed "power strip" for your data, allowing you to connect up to four additional I2C devices—such as external compasses, digital airspeed sensors, LED modules, or specialized laser rangefinders—using only a single port on your flight controller.

Crafted for reliability in high-vibration environments, the ReadytoSky splitter ensures stable data transmission across all connected nodes, making it a critical component for professional UAV builds and complex autonomous platforms.

Key Highlights:

4-Way Port Expansion: Instantly converts one I2C port into four, enabling the simultaneous use of multiple external sensors and accessories.
Seamless Compatibility: Designed specifically for the Pixhawk (2.4.6/2.4.8) and APM 2.8 ecosystems, utilizing standard 4-pin JST-GH or DF13 style connections.
Plug-and-Play Installation: Includes a pre-terminated 4-wire cable, allowing for immediate integration without the need for custom soldering or wiring harnesses.
Ultralight & Compact: Measuring just 37mm x 18.3mm, this hub fits easily into tight frames and adds negligible weight to your aircraft's takeoff profile.
Robust Data Bus: Features a high-quality PCB that maintains signal integrity across all four ports, preventing sensor dropouts during critical flight maneuvers.

Technical Specifications

Feature	Details
Brand	ReadytoSky
Interface Type	I2C (Inter-Integrated Circuit)
Ports	1 Input → 4 Outputs
Dimensions	37mm x 18.3mm x 9mm
Included Cable	4-Wire I2C Connector
Compatibility	Pixhawk 2.4.8, APM 2.8, PX4, and Arduino

Pro-Builder Tip:

When connecting multiple high-draw I2C peripherals (like high-brightness RGB LED boards), ensure your Flight Controller’s internal regulator can handle the cumulative current. For complex setups with an airspeed sensor and external GPS/Compass, the ReadytoSky Splitter is the cleanest way to keep your wiring loom organized and "pro-tier" in appearance!

Partsbaba Quality Commitment: All ReadytoSky accessories are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can expand your autonomous system with total peace of mind.

Only 1 items left

Mini 5V Lost Buzzer with JST Female Plug

₹ 111.86

ReadytoSky Mini 5V Lost Model Buzzer – High-Decibel Recovery Alarm

Never lose track of your aircraft again with the ReadytoSky Mini 5V Lost Model Buzzer. This compact, high-output audible alarm is the ultimate insurance policy for FPV drones, fixed-wing planes, and RC vehicles. Designed to trigger a loud, piercing alert during a signal loss or a crash, this buzzer helps you locate your model in tall grass, thick brush, or out-of-sight landing zones.

Equipped with a pre-soldered JST Female Plug, this buzzer offers a true plug-and-play solution for flight controllers and power distribution boards. Its ultralight footprint makes it an essential addition to even the smallest micro-quads, where every gram counts.

Key Highlights:

High-Decibel Alert: Engineered to produce a sharp, clear tone that cuts through ambient noise, making it significantly easier to recover "lost" models.
Plug-and-Play JST Connector: Features a standard JST female plug for a secure, solder-free connection to compatible pins on your flight stack or receiver.
Ultralight & Compact: Small enough to be tucked into tight frames or taped to an arm without affecting the flight dynamics or center of gravity of your drone.
Low-Power Efficiency: Optimized to run on a standard 5V rail, ensuring it won't drain your flight battery while providing maximum volume.
Multi-Purpose Functionality: Can be configured via Betaflight, INAV, or ArduPilot to act as a low-battery warning, a lost-model alarm, or a status indicator (arming/disarming).

Technical Specifications

Feature	Details
Brand	ReadytoSky
Operating Voltage	5V DC
Connector Type	JST Female Plug
Sound Output	High-Decibel Active Piezo
Dimensions	Approx. 9mm x 5.5mm (Buzzer unit)
Compatibility	Drones, RC Cars, Boats, and Arduino Projects
Application	Lost Model Alarm / Low Battery Warning

Pro-Builder Tip:

To get the most out of your buzzer in Betaflight, head to the "Configuration" tab and ensure "Beeper" is enabled. You can then assign a specific switch on your transmitter to the BEEPER mode in the "Modes" tab. If you ever go down in high weeds, just flip the switch to activate a constant "SOS" tone for easy recovery!

Partsbaba Quality Commitment: All ReadytoSky components are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can fly with the confidence that you'll always find your way home.

Are you installing this on a racing drone for crash recovery, or are you looking to use it as a low-voltage alarm for a DIY electronics project?

Only 5 items left

Mini 12V 3A UBEC Input 4S-6S

₹ 281.00

In stock

4pc M2 Anti-vibration Rubber Shock Absorber Ball

₹ 68.00

Only 10 items left

4pc M3 Anti-vibration Rubber Shock Absorber Ball

₹ 77.00

Only 11 items left

Motor Mounting Stand for 35-72mm / 1.4-2.8in

₹ 534.66

In stock

Motor Mounting Stand for 50-110mm 2-4.3in

₹ 694.00

Out of stock

Low Voltage Servo Signal Reverser

₹ 178.00

In stock

High Voltage Servo Signal Reverser

₹ 226.00

In stock

180 Servo Expander

₹ 340.61

In stock

1pcs Servo Bracket CNC Aluminum Alloy Servo Holder Mount

₹ 298.00

In stock

1pc Aluminum Standard Servo Mounting Bracket Red

₹ 512.00

In stock

25T 37mm Metal Servo Motor Horn Half Arm Red

₹ 121.00

Out of stock

15T Metal Servo Motor Horn Arm Red for ES08MA II

₹ 167.84

Only 1 items left

25T 31mm Metal Servo Motor Horn Arm Red

₹ 187.00

Only 1 items left

3.5mm Female to 4.0mm Male Gold Bullet Banana Connector

₹ 104.00

Only 2 items left

3.5mm Male to 4.0mm Female Gold Bullet Banana Connector

₹ 101.95

Only 3 items left

M5 M6 Propeller Nut Cap CW & CCW (1 pair)

₹ 83.00

In stock

100A PDB Power Distribution Board Glass Fiber

₹ 1,098.90

Durable 100A Power Distribution Board

Power surges can fry expensive flight controllers during high-speed maneuvers. This 100A Power Distribution Board acts as a stable hub for your battery energy. Since it is made from glass fiber, it provides excellent structural strength. It ensures that your ESCs receive clean power while maintaining a lightweight profile for agility.

Benefits of the 100A pdb glass fiber

The 100A pdb glass fiber supports up to 8 motors for advanced drone builds. It also includes PWM outputs for precise motor control and stable hovering. Because it uses a circular layout, it fits perfectly in the center of your frame. This 100A pdb glass fiber is ideal for both quadcopters and heavy-lift octocopters.

Engineering and Scalability

This 100A PDB handles high current loads without overheating. It also features FMU and I/O PWM outputs for advanced flight systems. This 100A Power Distribution Board weighs only 17 grams, which helps maximize your flight duration. Specifically, this 100A Power Distribution Board is built to last through hundreds of flights.

Features & Benefits

Glass Fiber Construction – Offers superior durability and heat resistance for racing.
8 ESC Support – Provides enough connection points for large multi-rotor aircraft.
100A Max Current – Delivers massive power for high-performance brushless motors.
PWM Integration – Simplifies the connection between your ESCs and flight controller.

Technical Specifications

Specification	Details
MPN	AX-100A-PDB
Product Type	Power Distribution Board
Category	Drone Components
Radius	35mm

Compatibility Table

Drone Type	Motor Support
Quadcopter	4 Motors
Hexacopter	6 Motors
Octocopter	8 Motors

Professional Assembly Tip

Secure your 100A pdb glass fiber using nylon spacers to prevent electrical shorts. A 100A pdb glass fiber is the heart of a reliable heavy-lift drone. Always inspect your 100A PDB after any hard landings. Using a 100A Power Distribution Board ensures your flight system stays protected.

In stock

Propeller Locket (3 Hole Propeller Wrench)

₹ 865.10

Only 2 items left

3S T Plug Lipo Battery Charging Board

₹ 262.00

In stock

T Plug, XT60, 4mm Banana Connector Female-XT60 Plug 2-6S Lipo Battery Parallel Charging Board

₹ 636.00

ReadytoSky 2S-6S LiPo Parallel Balanced Charging Board (XT60)

Product Description

The ReadytoSky Parallel Balanced Charging Board is an advanced solution for pilots and hobbyists who need to charge multiple batteries quickly without compromising safety. This board allows you to charge up to six LiPo, LiFe, or Li-Ion battery packs (2S to 6S) simultaneously. By using a parallel setup, you can save up to 1/6th of your total charging time compared to individual charging. Built with premium Amass connectors and a thickened 2OZ copper PCB, this board is engineered to handle high current loads while maintaining perfect cell balance across all connected packs.

Key Features

Massive Efficiency: Charge up to 6 batteries at once; multiple boards can be linked to charge up to 18 packs simultaneously.
High-Current Durability: 2OZ-thick copper foil allows the board to handle a continuous 80A current and 30A charging current safely.
Superior Wiring: Equipped with 14AWG multi-strand silicone wire for the main power input and 20AWG silicone wire for balance output.
Universal Compatibility: Designed to work seamlessly with Imax B6, B6AC, B8, UNA6, and most standard balance chargers.
Enhanced Safety: Built-in short-circuit protection and overcharge prevention ensure a stable, balanced charge for every cell.
Premium Components: Features genuine Amass output plugs and protective silicone caps for long-term reliability.

Technical Specifications

Brand: ReadytoSky
Battery Support: 2S, 3S, 4S, 5S, 6S
Chemistry Support: LiPo, LiFe, Li-Ion
Plug Type: XT60 (Main) / JST-XH (Balance)
Main Wire Gauge: 14AWG Silicone
Balance Wire Gauge: 20AWG Silicone
Maximum Current: 80A (Continuous)
Dimensions: 14 x 6.7 x 2.5 cm
Weight: 146g

Warranty Information

All products supplied by Partsbaba are genuine and original. We offer a 14-day replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

In stock

1S Lipo Series Charging Board

₹ 1,627.00

ReadytoSky 1S LiPo Series Charging Board

Product Description

The ReadytoSky 1S LiPo Series Charging Board is a professional-grade solution designed to charge multiple 1-cell batteries with the precision of a single balanced pack. Unlike parallel boards, this series board ensures that every battery receives the exact same current, making it ideal for FPV tiny whoops, micro drones, and RC aircraft models. Constructed from high-quality FR4 and ABS materials, it features premium silicone wiring to minimize resistance and heat. Whether you are using JST-PH 2.0 or JST 1.25 connectors, this board provides a secure and stable connection to optimize battery performance and longevity.

Key Features

Dual Connector Support: Equipped with both JST-PH 2.0mm and JST 1.25mm ports for maximum compatibility with 1S micro batteries.
Series Charging Logic: Charges batteries in a series configuration to ensure consistent current delivery across all cells.
Premium Wiring: Includes a 16AWG XT60 silicone charge cable and a 22AWG 6S balance lead for precise voltage monitoring.
Safe & Efficient: Minimizes voltage drops and prevents the hazards often associated with parallel charging mismatched 1S cells.
Robust Build: Manufactured using durable ABS and FR4 materials for long-term reliability in the field.
Versatile Connectivity: Includes a 4.0mm banana plug to male XT60 adapter cable for easy connection to standard balance chargers.

Technical Specifications

Brand: ReadytoSky
Battery Support: 1S Lithium Batteries (LiPo/LiHV)
Connectors: JST-PH 2.0 and JST 1.25
Input Interface: XT60 Female / 4.0mm Banana Plug
Balance Lead: 6S 22AWG Silicone
Material: ABS, FR4, and Silicone
Application: FPV Tiny Whoops, Inductrix, Blade, and Micro RC Models

Warranty Information

All products supplied by Partsbaba are genuine and original. We offer a 14-day replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

Out of stock

1S Lipo Battery Parallel Charging Board

₹ 1,910.00

ReadytoSky 1S LiPo Parallel Charging Board (GNB27 / PH2.0 / JST1.25)

Product Description

The ReadytoSky 1S Parallel Charging Board is a high-efficiency tool designed to charge up to six 1S batteries simultaneously. This board is a game-changer for micro-drone pilots, supporting a variety of 1S battery types including LiPo, LiHv, Li-ion, and LiFe. It features a triple-connector design (GNB27, JST-PH 2.0, and JST 1.25), ensuring compatibility with almost any micro battery on the market. With integrated safety fuses and high-quality silicone cabling, this board allows you to spend less time at the charger and more time in the air.

Key Features

6-Channel Simultaneous Charging: Charge up to six 1S batteries at once to significantly reduce downtime.
Triple Connector Support: Equipped with GNB27, JST-PH 2.0mm, and JST 1.25mm ports for universal compatibility.
Advanced Safety Protection: Features a built-in 3A PTC fuse and short-circuit protection to prevent electrical hazards.
Dual Input Options: Comes with both an XT60 plug and 4.0mm banana plugs, making it compatible with nearly all balance chargers.
Multi-Chemistry Support: Works seamlessly with LiPo, LiHv (High Voltage), Li-ion, and LiFe 1S cells.
Durable Construction: Built with premium PC material and heavy-duty 16AWG silicone wiring for maximum conductivity and longevity.

Technical Specifications

Brand: ReadytoSky
Battery Support: 1S (LiPo / LiHv / Li-ion / LiFe)
Connectors: GNB27, JST-PH 2.0, JST 1.25
Input Interface: XT60 and 4.0mm Banana Plug
Safety: Built-in 3A PTC Fuse
Main Cable: 16AWG Silicone
Material: High-grade PC Plastic and Silicone

Usage Instructions

Connect the parallel board to your LiPo balance charger via the XT60 or banana plugs.
Plug your 1S batteries into the corresponding ports (ensure all batteries are of similar voltage).
Configure your charger to the 1S setting and set the appropriate current (Total Ah of all batteries combined).
Start the charging process.

Warranty Information

All products supplied by Partsbaba are genuine and original. We offer a 14-day replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

In stock