RFQ Collection

Enhance your drone's flight with Gemfan FPV Drone Propeller 5127.5 Proxy. This 3-blade propeller in Phoenix Red features a 2.75" pitch and 5mm shaft, offering exceptional performance and durability for your FPV drone. 

Readytosky 30A 2–6S Brushless ESC for RC Drone & Quadcopter – High Stability OPTO ESC

Power Your Drone with Precision & Reliability

Upgrade your drone performance with the Readytosky 30A Brushless ESC, now available on PartsBaba. Designed for smooth and responsive control, this high-performance Electronic Speed Controller is ideal for RC drones, quadcopters, and helicopters like F450, S500, and ZD550 frames.

Built with advanced firmware and a high-quality MOSFET driver chip, this ESC ensures stable operation, fast throttle response, and enhanced flight efficiency—even in demanding conditions.

Key Features

• High Compatibility Firmware
  Optimized firmware supports a wide range of RC drones and flight controllers for seamless integration.
• Fast Throttle Response (Up to 621Hz)
  Delivers ultra-smooth and precise control, improving overall flight performance.
• Advanced MOSFET Driver Chip
  Enhances stability, efficiency, and durability compared to standard ESCs.
• Improved Signal Integrity
  Twisted pair throttle signal cable minimizes interference and ensures accurate signal transmission.
• OPTO ESC Design (No BEC)
  Lightweight and energy-efficient design, ideal for high-performance drone builds.

Technical Specifications

• Brand: Readytosky
• Continuous Current: 30A
• Maximum Current: 40A
• Battery Support: 2–6S Li-Po
• Weight: 30g
• BEC Output: No (OPTO ESC)

Why Buy from PartsBaba?

At PartsBaba, we provide 100% genuine and tested electronic components to ensure reliability and performance. This product comes with a 14-day replacement warranty against manufacturing defects, giving you peace of mind with every purchase.

Perfect For

• RC Drone Builds
• Quadcopter Projects (F450, S500, ZD550)
• DIY Drone Enthusiasts
• Professional & Hobby Pilots

The Readytosky 30A 2-6S ESC with 3.5mm Banana Connector delivers high-performance power management for RC helicopters and quadcopters, featuring optimized firmware, MOSFET chip, 621Hz throttle support, and compatibility with F450, S500, ZD550 models. 

Readytosky 30A Brushless ESC with T-plug and 3.5mm Banana Connector ensures smooth and efficient motor control for RC drones, boats, and cars. Supports 2-3S LiPo and 5-9S NiMH batteries, delivers 30A continuous and features a built-in 5V/1A BEC.

The BLHeli 12A ESC (ONESHOT) delivers high performance and reliability for QAV 250 quadcopters and FPV multirotors. With BLHeli firmware, programmable settings, and multiple protection features.

DYS 25g Digital Servo Motor – Full Metal Gear High Torque Servo for RC Aircraft, Drone & Robotics

Powerful, Precise & Built for Heavy-Duty Performance

Upgrade your RC builds with the DYS 25g Digital Servo Motor, now available on PartsBaba. Designed for strength, precision, and durability, this high-torque servo is ideal for RC aircraft, helicopters, drones, cars, boats, and robotics applications.

Featuring a full metal gear system and digital control, this servo delivers fast response, smooth movement, and reliable performance—even under demanding loads.

Key Features

• Full Metal Gear Construction
  Ensures high durability, wear resistance, and long service life under heavy load.
• High Torque Output
  Delivers up to 6.0 kg·cm torque @ 6V, ideal for medium to large RC models.
• Fast & Precise Digital Control
  Provides quick response (up to 0.06 sec/60°) with smooth and accurate movement.
• 180° Rotation Range
  Wide movement range for better control and flexibility in applications.
• Dual Ball Bearing (2BB)
  Enhances stability, reduces friction, and improves overall performance.
• Overload & Safety Protection
  Protects against overheating and excessive load for longer lifespan.
• Strong & Lightweight Build
  Nylon fiber case with metal gears ensures durability without excessive weight.
• Wide Compatibility
  Suitable for RC planes, helicopters, drones, cars, boats, and robotics projects.

Technical Specifications

• Brand: DYS
• Weight: 29g
• Dimensions: 35.9 × 15.2 × 28.6 mm
• Operating Voltage: 4.8V – 6V
• Torque:
  • 5.0 kg·cm @ 4.8V
  • 6.0 kg·cm @ 6V
• Speed:
  • 0.07 sec/60° @ 4.8V
  • 0.06 sec/60° @ 6V
• Rotation Angle: 180°
• Motor Type: Coreless Motor
• Gear Type: Full Metal Gear
• Control System: Digital PWM
• Bearing: Dual Ball Bearing (2BB)
• Connector Wire Length: 250mm

Why Buy from PartsBaba?

At PartsBaba, we provide 100% genuine and quality-tested RC components. This product comes with a 14-day replacement warranty against manufacturing defects, ensuring a reliable and worry-free purchase.

Ideal For

• RC Fixed-Wing Aircraft
• RC Helicopters & Drones
• RC Cars & Boats
• Robotics & Automation Projects
• DIY & Mechatronics Applications

DYS X2807 1300KV Brushless Motor for 7-Inch FPV Drone (CW/CCW) – High Torque 6S Motor

Built for Long-Range FPV, Freestyle & High-Performance Flying

Power your FPV drone with the DYS X2807 1300KV Brushless Motor, now available on PartsBaba. Designed specifically for 7-inch FPV drones, this motor delivers the perfect balance of torque, efficiency, and smooth throttle response—ideal for long-range, cinematic, and freestyle builds.

With its 2807 stator size and 1300KV rating, this motor ensures strong thrust, efficient cruising, and improved flight time on 6S LiPo setups.

Key Features

• Optimized for 7-Inch FPV Drones
  Perfect for long-range, freestyle, and cinematic quadcopter builds.
• Efficient 1300KV Performance
  Provides smooth power delivery with reduced current draw for longer flight times.
• 6S LiPo Compatibility
  Designed for high-voltage setups with stable and reliable performance.
• High Torque Output
  Ideal for larger 6–7 inch propellers, ensuring strong lift and control.
• Smooth & Low Vibration Operation
  Delivers stable throttle response for both aggressive flying and steady cruising.
• Efficient Heat Dissipation
  Maintains performance during long flights and high-load conditions.
• Durable & Reliable Build
  Built to handle FPV racing, freestyle, and endurance missions.

Technical Specifications

• Brand: DYS
• KV Rating: 1300KV
• Motor Size: 2807 (33.5 × 17.5 mm)
• Shaft Size: 4 mm
• Weight: 48.6g (without silicone wire)
• Battery Support: 2–6S LiPo
• Max Power (6S): 1400W
• Peak Current (6S): 55A
• Idle Current (10V): 1A
• Internal Resistance: 60mΩ
• Recommended Propellers: 6" – 7"
• Wire: 18AWG, 200mm

Why Buy from PartsBaba?

At PartsBaba, we offer 100% genuine and quality-tested drone components. This product comes with a 14-day replacement warranty against manufacturing defects, ensuring a reliable and worry-free purchase.

Ideal For

• 7-Inch FPV Drones
• Long-Range FPV Builds
• Freestyle & Racing Quads
• Cinematic Drone Setups
• Advanced DIY Drone Projects

DYS X2812 900KV Brushless Motor for 7-Inch FPV Drone (CW/CCW) – High Torque 6S Motor

Efficient Power, Smooth Control & Long-Range Performance

Upgrade your FPV drone with the DYS X2812 900KV Brushless Motor, now available on PartsBaba. Built for 7-inch long-range and freestyle drones, this motor delivers strong torque, smooth throttle response, and excellent efficiency—perfect for extended flights and cinematic flying.

With its 12N14P stator design and optimized 900KV rating, this motor ensures stable performance, reduced vibration, and reliable power output across a wide range of flying conditions.

Key Features

• High-Torque 12N14P Design
  Delivers smooth, stable, and powerful performance for 7-inch FPV builds.
• Efficient 900KV Output
  Optimized for long-range cruising and controlled freestyle flying.
• Wide Voltage Compatibility
  Supports 2S–6S LiPo batteries, with best performance on 6S setups.
• Optimized for Larger Propellers
  Works efficiently with CF 9x4.7 propellers for improved thrust and control.
• Smooth & Low Vibration Operation
  Precision-balanced rotor ensures stable and responsive flight.
• High-Quality Copper Windings
  Enhances efficiency, heat resistance, and long-term durability.
• Lightweight & Durable Build
  Provides strong performance without adding unnecessary weight.

Technical Specifications

• Brand: DYS
• KV Rating: 900KV
• Framework: 12N14P
• Motor Diameter: 33.5 mm
• Motor Length: 37 mm
• Shaft: M5
• Weight: 72g
• Battery Support: 2–6S LiPo
• Recommended Propeller: CF 9x4.7

Why Buy from PartsBaba?

At PartsBaba, we provide 100% genuine and quality-tested drone components. This product comes with a 14-day replacement warranty against manufacturing defects, ensuring a reliable and worry-free purchase.

Ideal For

• 7-Inch FPV Drones
• Long-Range Drone Builds
• Freestyle & Cinematic Flying
• Multicopter & RC Aircraft Projects
• Advanced DIY Drone Builds

DYS X3115 900KV Brushless Motor for 9–10 Inch FPV Drone (CW/CCW) – High Torque 6S Motor

Powerful Thrust, Smooth Control & Long-Range Performance

Upgrade your FPV drone with the DYS X3115 900KV Brushless Motor, now available on PartsBaba. Designed for 9–10 inch FPV drones, this high-performance motor delivers strong torque, smooth throttle response, and excellent efficiency—perfect for long-range, freestyle, and cinematic builds.

With its 12N14P stator design and optimized 900KV rating, this motor ensures stable performance, reduced vibration, and efficient power delivery, especially on 6S LiPo setups.

Key Features

• High-Torque 12N14P Design
  Provides powerful and stable output for large propeller FPV builds.
• Efficient 900KV Performance
  Optimized for long-range cruising, smooth throttle control, and extended flight time.
• 6S LiPo Optimized
  Supports 2S–6S batteries, with best performance on 6S setups.
• Designed for 9–10 Inch Propellers
  Ideal for larger drones requiring strong lift and stable thrust.
• Smooth & Low Vibration Operation
  Precision-balanced rotor ensures controlled and stable flight.
• High-Quality Copper Windings
  Improves efficiency, durability, and heat resistance.
• Lightweight Yet Powerful Build
  Delivers strong thrust without unnecessary weight.
• Versatile Applications
  Suitable for FPV racing, freestyle, long-range drones, multicopters, and RC aircraft.

Technical Specifications

• Brand: DYS
• KV Rating: 900KV
• Framework: 12N14P
• Motor Diameter: 37 mm
• Motor Length: 45.3 mm
• Shaft: M5
• Weight: 150g
• Battery Support: 2–6S LiPo

Why Buy from PartsBaba?

At PartsBaba, we provide 100% genuine and quality-tested drone components. This product comes with a 14-day replacement warranty against manufacturing defects, ensuring a reliable and worry-free purchase.

Ideal For

• 9–10 Inch FPV Drones
• Long-Range & Cinematic Drone Builds
• Freestyle & Racing Quads
• Multicopter & RC Aircraft Projects
• Advanced DIY Drone Builds

Gemfan 45mm 3-Blade Micro Propellers – High-Performance Whoop Racing

Unlock the full potential of your 80mm–85mm micro drones with the Gemfan 45mm Tri-Blade Propellers. Specifically engineered for high-intensity indoor FPV racing, these propellers strike the perfect balance between raw thrust and surgical precision. Whether you are diving through tight gates or executing technical maneuvers, the 45mm disk diameter provides the "grip" and recovery power necessary to keep your micro-quad agile and responsive.

Molded from high-impact Polycarbonate (PC), these props are designed to withstand the rigors of competitive racing while maintaining an ultralight profile of just 0.43g.

Key Highlights:

• Micro-Racing Optimized: Tailored specifically for 80–85mm frames, providing increased top-end speed and more efficient power delivery compared to standard 40mm props.

• Ultralight 0.43g Design: Minimizes rotational inertia, allowing your motors to change RPM instantly for a "locked-in" flight feel and rapid acceleration.

• Precision 1.5mm Mount: Designed for a secure, vibration-free fit on 0805 and 1102 series micro brushless motors.

• Durable PC Construction: The high-quality polycarbonate material is flexible enough to survive "prop strikes" during indoor sessions without shattering.

• Complete Racing Pack: Each set includes 4 CW and 4 CCW propellers, ensuring you have plenty of spares to stay in the air after a crash.

Technical Specifications

Pro-Builder Tip:

The 45mm propeller is the "sweet spot" for 85mm Whoop frames (like the Meteor85). If you find your 85mm quad feels a bit sluggish on 2-blade props, switching to these tri-blades will significantly improve your low-end authority and cornering stability!

Partsbaba Authenticity Guarantee: All Gemfan products we supply are 100% genuine and original. Your purchase is backed by our 14-day replacement warranty against manufacturing defects, so you can race with total confidence.

Gemfan Hurricane 2023 Tri-Blade Propellers – High-Velocity Micro Power

Push the limits of your 2-inch micro-quad with the Gemfan Hurricane 2023. Specifically engineered for high-KV "Toothpick" builds and specialized racing micros, these propellers feature an aggressive 2.3-inch pitch. This higher pitch profile translates to massive top-end speed and explosive "punch-out" authority, allowing your micro drone to maintain stability and power even in challenging outdoor conditions.

Molded from premium Polycarbonate (PC), the Hurricane 2023 is designed to be both stiff and resilient. At just 0.88g, these props minimize rotational inertia, giving your flight controller’s PID loop the ultra-fast motor response needed for a "locked-in" competitive racing experience.

Key Highlights:

• High-Speed Hurricane Profile: The 2.3" pitch is optimized for pilots who want maximum thrust and forward velocity from their 2-inch platforms.

• Ultralight Racing Build: Weighing only 0.88g, these propellers reduce the load on your motors, resulting in cooler operation and improved battery efficiency during high-speed runs.

• Specialized 1mm Mount: Designed with a 1mm 3-hole T-mount, ensuring a secure and balanced fit on high-performance micro brushless motors.

• Impact-Resistant PC: Crafted from high-quality polycarbonate that maintains its aerodynamic shape under high-RPM stress while resisting shattering during minor crashes.

• Sleek Aesthetics: Available in professional Clear Gray or vibrant Pink, allowing you to customize your drone’s look without sacrificing performance.

Technical Specifications

Pro-Builder Tip:

The Hurricane 2023 is a "screamer" on 3S and 4S setups! If you are using a 1106-6000KV motor, this prop provides an incredible power-to-weight ratio. Because of the aggressive pitch, ensure your ESCs are rated for at least 12A–15A to handle the amp draw during full-throttle bursts.

Partsbaba Authenticity Guarantee: All Gemfan Hurricane propellers supplied are 100% genuine and original. Your purchase is protected by our 14-day replacement warranty against manufacturing defects, so you can fly with total confidence.

Gemfan Hurricane 3016 Tri-Blade Propellers – Optimized Efficiency for 3-Inch Micros

Take your micro-drone performance to the next level with the Gemfan Hurricane 3016. Specifically designed for ultralight 3-inch "Toothpick" builds and specialized racing quads, these propellers offer an exceptional balance of low-end torque and high-speed efficiency. The 1.6-inch pitch is engineered to provide a smooth, linear throttle response, making them the perfect choice for pilots who prioritize "floaty" freestyle maneuvers and precise proximity flying.

Molded from high-tenacity Polycarbonate (PC), the Hurricane 3016 is built to maintain its aerodynamic profile under high-RPM stress while remaining resilient enough to survive minor tumbles and gate clips.

Key Highlights:

• High-Efficiency Blade Profile: The 3-blade design provides a smoother flight characteristic and quieter operation compared to bi-blade props, without the excessive amp draw of 4-blade alternatives.

• Ultralight 1.18g Design: At just over one gram per propeller, these blades minimize rotational mass, allowing your motors to react instantly to flight controller corrections for a "locked-in" feel.

• Micro-Motor Optimization: Featuring a 1.5mm 3-hole T-mount, these props are the ideal match for high-performance 1108 to 1303 series brushless motors.

• Tough Polycarbonate Build: Crafted from impact-resistant PC material that balances stiffness for flight performance with flexibility for durability.

• Sleek Color Options: Available in Clear Gray and Blue, allowing you to customize your drone’s look while maintaining high visibility during flight.

Technical Specifications

Pro-Builder Tip:

The Hurricane 3016 is a favorite for 1S and 2S 3-inch Toothpick builds. Because of its relatively low pitch, it is incredibly efficient, often extending flight times by 20–30 seconds compared to more aggressive 3-inch props. It’s the go-to choice for a "stealthy" and long-range micro setup!

Partsbaba Authenticity Guarantee: All Gemfan Hurricane propellers supplied are 100% genuine and original. Your purchase is protected by our 14-day replacement warranty against manufacturing defects, ensuring your micro-flight experience is mission-ready.

Gemfan 1507-3 Glass Fiber Nylon Propellers – Heavy-Lift Industrial Power

Step up to industrial-grade performance with the Gemfan 1507-3. Specifically engineered for large-wheelbase multirotors and heavy-lift FPV platforms, these massive 15-inch tri-blade propellers are built to move serious weight with absolute stability. Unlike smaller hobby props, the 1507 series is crafted from Glass Fiber Reinforced Nylon, providing the extreme stiffness required to prevent blade deforming under the immense torque of large-stator motors.

With a 7-inch pitch and a robust 3-blade configuration, these propellers deliver incredible "grip" in the air, making them the ideal choice for cinema rigs carrying heavy gimbal stabilized cameras or industrial drones requiring precise hovering and heavy payload capacity.

Key Highlights:

• High-Torque Performance: The tri-blade design provides significantly more thrust than standard bi-blades, allowing for shorter takeoff distances and better altitude hold for heavy-lift rigs.

• Glass Fiber Nylon Construction: The composite material offers superior structural rigidity compared to standard plastics, ensuring the blades maintain their aerodynamic profile even at high RPM.

• Large-Scale Compatibility: Optimized for high-torque motors like the 4218 series and larger, providing the thermal and mechanical efficiency needed for long-endurance flights.

• Versatile Mounting: Features a 6mm center bore and includes a set of adapters, ensuring a secure and centered fit on various heavy-duty motor shafts.

• Reduced Vibration: Gemfan’s precision molding and high-density material result in a naturally balanced prop, protecting your sensitive flight controller and camera gear from mechanical noise.

Technical Specifications

Pro-Builder Tip:

The 1507-3 is a "high-authority" propeller. If you are building a X8 Coaxial or a Heavy-Lift Hexacopter, these props provide excellent cooling for your motors due to the high-volume airflow. Always ensure your ESCs are calibrated for the high rotational inertia of a 68g glass-fiber propeller to maintain snappy motor response!

Partsbaba Authenticity Guarantee: All Gemfan industrial propellers are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can deploy your professional-grade platforms with total confidence.

Readytosky 35A/45A BLHeli_S 2-6S LiPo ESC with Programmable RGB LED – High-Performance FPV Flight Control

Take your FPV drone flights to the next level with the Readytosky 35A/45A BLHeli_S ESC, engineered for precision, speed, and reliability. Ideal for both racing and freestyle quadcopters, this ESC delivers smooth throttle response, low noise, and stable performance even under extreme flight conditions. Its built-in programmable RGB LED adds dynamic visibility for night flights, combining style with functionality.

Constructed with a premium 6-layer PCB featuring 3-ounce copper thickness and a gold-plated surface, this ESC excels in heat dissipation, current resistance, and long-term durability. Advanced features like Damped Light mode and regenerative braking enhance motor deceleration for superior control and energy efficiency. Supporting BLHeli-S firmware and DShot 150/300/600 as well as ONESHOT125 protocols, the ESC ensures seamless integration with a variety of flight controllers.

Key Features:

• High-Speed Control Chip: EFM8BB21F16G ensures fast processing, smooth throttle response, and reliable flight stability
• Programmable RGB LED: Integrated multi-color LED enhances visibility and adds style during night flights
• Premium 6-Layer PCB: 3-ounce copper with gold-plated surface provides superior heat dissipation and durability
• Damped Light & Regenerative Braking: Improves motor deceleration for precise control and energy efficiency
• Digital Throttle Protocols: Compatible with BLHeli-S firmware, DShot 150/300/600, and ONESHOT125 for optimized performance
• Strong Anti-Interference: Layered PCB design reduces signal interference, ensuring stable high-current operation
• Wide Voltage Support: Works with 2-6S LiPo batteries for versatile drone configurations
• Compact & Lightweight: Weighing just 6.6g, perfect for high-speed, agile drone builds

Upgrade your FPV quadcopter with the Readytosky 35A/45A BLHeli_S ESC and enjoy faster response, enhanced control, and reliable stability on every flight.