Visa

Pixhawk 2.4.8 Combo Set Main board +SD Card+Buzzer+Safety Switch

₹ 9,203.67

Out of stock

XXD A2212 1000KV Brushless Motor

₹ 567.52

Out of stock

XXD A2212 1800KV Brushless Motor

₹ 599.00

Out of stock

2204 260KV 3-Axis Brushless Gimbal Motor

₹ 1,016.00

Out of stock

0615 Coreless Brushed Motor (2CW+2CCW)

From ₹ 333.34

High-Speed Flight with the 0615 Coreless Brushed Motor

Sluggish movement or motor failure can quickly ground your favorite micro drone. This 0615 Coreless Brushed Motor solves that issue because it offers a high power-to-weight ratio. You can achieve faster speeds and better agility while maintaining stable flight patterns. Since these motors are coreless, they respond instantly to your controller inputs.

Benefits of the 2cw + 2ccw motor Set

The 2cw + 2ccw motor configuration is essential for balanced drone flight. This set includes two clockwise and two counter-clockwise motors for a complete replacement. While standard motors are heavy, this 2cw + 2ccw motor set is incredibly lightweight. It also features low internal resistance to maximize your battery life during every session.

Quality Engineering by ReadytoSky

The 0615 Coreless Brushed Motor utilizes powerful magnets for smooth and quiet operation. This quality is important because it reduces vibrations that can interfere with flight controllers. Also, the 0.8mm shaft is compatible with most micro propellers. Using a genuine 0615 Coreless Brushed Motor ensures your drone remains reliable for many flights.

Features and Benefits

High-Speed Rotation – Delivers the thrust needed for racing and acrobatic maneuvers.
Coreless Design – Provides rapid acceleration and deceleration for precise control.
Low Noise Output – Operates quietly so you can fly in indoor environments.
Durable Wire Leads – Features flexible, color-coded wires for easy identification.
Optimized Efficiency – Minimizes heat buildup to protect the motor's internal components.

Technical Specifications

Specification	Details
Brand	ReadytoSky
Shaft Diameter	0.8 mm
Motor Size	6mm x 15mm
Propeller Length	55mm or 65mm

Compatibility Table

Drone Type	Recommended Use
Micro Quads	Replacement / Upgrade
Tiny Whoop	Performance Build
DIY Projects	Small Robotics

Maximize Your 2cw + 2ccw motor Life

To keep your 0615 Coreless Motor healthy, avoid running them at full throttle for extended periods. Specifically, letting the 2cw + 2ccw motor set cool down between flights prevents premature wear. Always ensure your propellers are balanced to reduce stress on the 0615 Coreless Motor. Replacing your 0615 Coreless Brushed Motor in sets ensures your drone stays perfectly leveled.

Out of stock

CC3D Flip32 Naze32 Flight Controller Shock Absorber

₹ 263.26

Out of stock

X Type Cross Holder For Brushless Motor

₹ 63.00

Out of stock

F4 V3S Plus Flight Controller

₹ 5,013.00

Out of stock

F4 V3S Plus Flight Controller �� 60A 4IN1 3-6S Brushless ESC

₹ 9,488.00

Out of stock

F7 F722 Flight Controller

₹ 3,095.82

Out of stock

F4 NOXE V3 F411 Flight Controller (Acro Version)

₹ 4,817.50

Out of stock

Pixhawk Flight Controller Passive Buzzer

₹ 281.25

Out of stock

RunCam Nano 2 700TVL FPV Camera 2.1mm

₹ 1,819.00

Out of stock

F405 Flight Controller With OSD 16M Black Box �� 60A 4IN1 3-6S Brushless ESC

₹ 6,923.00

Out of stock

1/3" CMOS 1500TVL Mini FPV Camera 2.1mm Lens PAL / NTSC With OSD Orange

1/3-inch CMOS 1500TVL Mini FPV Camera 2.1mm Lens PAL / NTSC With OSD Orange

₹ 1,561.00

Professional Racing Quality with the 1500TVL Mini FPV Camera

Flickering video and poor low-light visibility are the enemies of any FPV pilot. This 1500TVL Mini FPV Camera solves these issues because it features a high-resolution CMOS sensor. You can navigate through dark areas effortlessly while maintaining a clear view of the track. Since it weighs only 6 grams, it won't affect the flight dynamics of your micro drone.

Benefits of This drone fpv camera for Racing

The 1500TVL Mini FPV Camera offers a wide voltage range for versatile power options. It integrates perfectly with most flight controllers and video transmitters. While other cameras are bulky, this drone fpv camera fits into the tightest frames. It also includes an On-Screen Display (OSD) so you can adjust settings mid-field.

Advanced Imaging and Low-Light Performance

This 1500TVL Mini FPV Camera utilizes 3DNR and D-WDR technology to balance light and shadow. This is important because it prevents the sun from washing out your video feed. Also, the 2.1mm lens provides a wide perspective for better situational awareness. Using this 1500TVL Mini FPV Camera gives you a competitive edge in every race.

Features and Benefits

1500TVL Horizontal Resolution – Delivers ultra-clear video for precise drone control.
0.001 Lux Sensitivity – Provides exceptional visibility during dusk or indoor flights.
Ultra-Lightweight Design – Weighs only 6g to maximize your drone's speed and agility.
Adjustable OSD Menu – Allows you to customize exposure and white balance on the fly.
Wide Voltage Input (5V-30V) – Compatible with a broad range of drone fpv camera setups.

Technical Specifications

Specification	Details
Brand	ReadytoSky (JINJIEAN)
Sensor	1/3" CMOS
Resolution	1500TVL
Lens	2.1mm

Compatibility Table

Drone Type	Mounting Size
FPV Racing Quads	19mm x 19mm
Freestyle Drones	19mm x 19mm
CineWhoops	19mm x 19mm

Optimize Your drone fpv camera Performance

To get the best results, ensure your Mini FPV Camera is securely mounted to reduce vibration. Specifically, use the OSD to calibrate the colors for your specific environment. This 1500TVL Mini FPV Camera is the ultimate choice for pilots who refuse to compromise on quality. Trust this drone fpv camera for your most demanding flights.

Out of stock

KK2.15 LCD Multirotor Flight Control Board for Quadcopter KK2 6050MPU 644PA F450 F550 S500

₹ 5,872.00

KK2.15 LCD Flight Controller – The Ultimate "No-PC" Setup Solution

Take the complexity out of drone building with the KK2.15 LCD Flight Controller. Renowned in the hobbyist community for its user-friendly interface, this board is the perfect "brain" for classic builds like the F450, F550, or S500. Unlike modern flight controllers that require a laptop and complex software for every adjustment, the KK2.15 features a built-in LCD screen and four-button interface, allowing you to tune PIDs, change motor layouts, and calibrate sensors right at the flying field.

Equipped with the reliable 6050MPU sensor (Gyro/Acc), the KK2.15 provides stable auto-leveling for beginners and a crisp "Acro" mode for those looking to perform flips and rolls.

Key Highlights:

Plug-and-Play Tuning: No computer? No problem. The integrated LCD screen allows for full configuration, from ESC calibration to advanced flight tuning, directly on the board.
Superior Sensor Fusion: The 6050MPU chipset ensures high-speed processing of movement data, resulting in smooth takeoffs and locked-in stability.
Versatile Multi-Rotor Support: Highly adaptable firmware supports a massive range of configurations including Dualcopters, Tricopters, Quadcopters, Hexacopters, and even Octocopters.
Auto-Level Logic: A robust self-leveling mode makes it much easier for new pilots to maintain a steady hover and recover from aggressive maneuvers.
Lightweight & Compact: At just 21g, it provides full-scale control without weighing down your aircraft, preserving your flight time and agility.

Technical Specifications

Feature	Details
IC	Atmega644 PA
Sensor	6050MPU InvenSense Inc.
Input Voltage	4.8V – 6.0V
Signal from Receiver	1520us (5 channels)
Signal to ESC	1520us
Size	50.5mm x 50.5mm x 12mm
Weight	21g
Firmware Interface	Standard 6-pin AVR

Frequently Asked Questions

Do I need a computer to set this up? No! One of the best features of the KK2.15 is that all primary setup and tuning can be done via the onboard screen and buttons.
How do I power the board?

The board is typically powered via the 5V BEC output from your first ESC (connected to Motor Header 1).
Is it compatible with my frame? Yes, if you are building a multi-rotor (3 to 8 motors), the KK2.15 has pre-programmed layouts to suit almost any standard frame geometry.

Partsbaba Quality Guarantee: We only supply 100% genuine and original KK2.15 boards. All units are backed by our 14-day replacement warranty against manufacturing defects. For setup guides and return details, please visit our support page.

Out of stock

700TVL COMS Camera

₹ 978.69

Readytosky 700TVL FPV Camera – Wide-Angle Clarity for Racing & Freestyle

Experience the thrill of high-speed flight with the Readytosky 700TVL FPV Camera. Engineered specifically for the demands of FPV racing and fixed-wing soaring, this camera balances high resolution with ultra-low latency. Featuring a 1/4" CMOS sensor and a 2.8mm wide-angle lens, it provides a clear, expansive field of view (90°) that allows pilots to navigate tight gaps and high-speed corners with absolute confidence.

Every component, from the optimized PCB to the lightweight, impact-resistant plastic housing, is designed to minimize weight while maximizing durability on frames like the QAV210, 250, or custom fixed-wing builds.

Key Highlights:

Low-Latency Performance: Optimized for real-time feedback with sub-1ms glass-to-glass latency, ensuring your sticks feel "connected" to the drone's movement.
Superior Wide-Angle View: The 2.8mm lens offers a 90-degree perspective, providing the perfect balance between a broad peripheral view and minimal fish-eye distortion.
Wide Voltage Flexibility: Supports a versatile 7.5V to 13V input, making it compatible with a wide range of power distribution boards and direct lipo connections.
Intelligent Image Processing: Features Auto White Balance (AWB) and Automatic Gain Control (AGC) to maintain consistent exposure when transitioning between bright skies and shaded areas.
Ultra-Lightweight Design: Specially built for FPV, the compact form factor ensures easy mounting without affecting the center of gravity of your aircraft.

Technical Specifications

Feature	Details
Brand	Readytosky
Resolution	700TVL
Sensor	1/4" CMOS
Lens	2.8mm Wide Angle (90°)
Signal System	PAL / NTSC (Selectable)
Input Voltage	7.5V – 13V
Electronic Shutter	PAL: 1/50–1/100,000s \| NTSC: 1/60–1/120,000s
Auto Controls	Gain (On/Off), White Balance (On/Off)
Weight	Optimized for FPV Racing

Ideal Applications:

FPV Racing Drones: Low latency is critical for staying on the race line.
Fixed-Wing Aircraft: The wide FOV is perfect for low-altitude proximity flying.
Mini Quads (180mm–250mm): Compact size fits perfectly in standard camera mounts.

Partsbaba Quality Promise: We guarantee that all Readytosky optics are 100% genuine and original. Your purchase includes a 14-day replacement warranty against manufacturing defects, so you can take to the skies with total peace of mind.

Out of stock

Pixhawk 2.4.8 Set, PX4/APM Flight Controller

₹ 15,181.00

Pixhawk 2.4.8 (APM 2.8 Combo) Flight Controller Set – Professional UAV Navigation Stack

Unlock advanced autonomous capabilities with the Pixhawk 2.4.8 Flight Control System. This comprehensive combo set is the industry standard for hobbyists, researchers, and professional drone builders who require a reliable, open-source ecosystem for UAV projects. Powered by a high-performance 32-bit ARM Cortex M4 processor, the Pixhawk 2.4.8 offers a significant leap in processing power and sensor reliability over traditional flight controllers, supporting advanced real-time operating systems (NuttX) and complex flight stacks like ArduPilot and PX4.

Whether you are building a long-range survey drone, an autonomous rover, or a heavy-lift multicopter, this set provides the redundant power systems and fail-safe mechanisms necessary for mission-critical operations.

Key Highlights:

Advanced Processing Power: Features the STM32F427 Cortex M4 (168MHz) with a hardware floating-point unit and 256K RAM, ensuring smooth handling of complex navigation algorithms.
Redundant Sensor Suite: Equipped with a 6-axis accelerometer/gyroscope, magnetometer, and a high-precision barometer for rock-solid altitude hold and GPS-assisted flight.
Extensive I/O Support: Includes 14 PWM/Servo outputs and dedicated ports for UART, I2C, SPI, CAN, and SBUS, allowing for seamless integration of GPS, telemetry, and payload gimbals.
Mission Safety & Fail-Safes: Integrated backup controller and dual power inputs ensure that your aircraft stays protected in the event of a primary system failure.
Data-Driven Analysis: Features an onboard Micro SD slot for real-time high-speed flight data logging, essential for post-flight tuning and troubleshooting.
Ready-to-Fly Combo: This "Full Combo" includes everything from the shock absorber mount to the power module, eliminating compatibility guesswork.

Technical Specifications

Feature	Details
Main Processor	32-bit STM32F427 Cortex M4 (168MHz)
Backup Processor	STM32F103 fail-safe co-processor
Memory	2MB Flash / 256KB RAM
Sensors	L3GD20 Gyro / LSM303D Accel-Mag / MPU6000 / MS5611 Baro
Interfaces	5x UART, 2x CAN, I2C, SPI, 3.3 & 6.6V ADC
Power Input	Redundant power supply compatible (via Power Module)
Mounting	Includes anti-vibration shock mount

Comprehensive Packing List:

1x Pixhawk 2.4.8 Flight Controller
1x Power Module (with XT60 connectors)
1x Vibration Damper/Shock Mount
1x Safety Switch & External Buzzer
1x I2C Expansion Board & RGB Connector
1x PPM Encoder (for PWM receiver compatibility)
1x SD Card (Pre-installed for logging)

Pro-Builder Tip:

The Pixhawk 2.4.8 is a "Current-Sensing" powerhouse. When setting up your Power Module in Mission Planner, ensure you calibrate the voltage and current sensors. This allows the Pixhawk to trigger an automatic "Return to Launch" (RTL) if your battery drops below a specific percentage, potentially saving your expensive UAV from a crash!

Partsbaba Authenticity Guarantee: All ReadytoSky Pixhawk components are 100% genuine. We offer a 14-day replacement warranty against manufacturing defects, ensuring your autonomous project starts on solid ground.

Out of stock

1200TVL HD COMS FPV Camera 2.8mm Lens PAL

₹ 1,589.00

ReadytoSky 1200TVL HD FPV Camera 2.8mm – High Clarity Vision for FPV Drones

Upgrade your drone’s visual performance with the ReadytoSky 1200TVL HD FPV Camera, built for sharp imaging, low-light clarity, and reliable real-time video transmission. Designed for FPV drones and quadcopters, this compact camera delivers detailed footage and stable performance across various flying conditions.

With advanced image processing features like D-WDR and 2D Noise Reduction, you get balanced exposure and reduced noise, ensuring a clear view whether you're flying in bright sunlight or low-light environments. Its lightweight and compact design makes it perfect for both racing drones and aerial hobby builds.

Key Features:

High-Resolution Output: Up to 1200TVL clarity with a 2.8mm lens for sharp, detailed FPV footage.
Excellent Low-Light Performance: Minimum illumination of 0.01 Lux ensures visibility even in dim conditions.
Advanced Image Processing: D-WDR and 2DNR enhance contrast and reduce noise for smoother video quality.
Auto Light Adjustment: Equipped with Auto Gain Control (AGC) and Backlight Compensation (BLC) for consistent exposure.
Compact & Lightweight: Weighs only 12g with a 26 x 26 mm form factor—ideal for easy drone integration.
Day/Night Support: Automatically adapts between color and black & white modes based on lighting.

Technical Specifications:

Brand: ReadytoSky
Image Sensor: 1/4" or 1/3" CMOS SUPER HAD II
Horizontal Resolution: 700TVL / 1200TVL
Lens: 2.8mm
Signal System: PAL
S/N Ratio: >60dB (AGC OFF)
Electronic Shutter: PAL: 1/50 – 1/100,000
AGC: Yes
BLC: Yes
Minimum Illumination: 0.01 Lux / F1.2
WDR: D-WDR
DNR: 2DNR
Day/Night Mode: Auto / Color / B&W
Power Supply: DC 12V
Weight: 12g
Dimensions: 26 x 26 x 30 mm

Warranty:
All products sold by PartsBaba are 100% genuine and original. We provide a 14-day replacement warranty in case of manufacturing defects. Please refer to our Cancellation & Returns page for more details.

Get a clearer, more responsive FPV experience with the ReadytoSky 1200TVL Camera—built for precision flying and dependable performance.

Out of stock

Mini OSD For Pixhawk Flight Controller

₹ 1,409.00

Out of stock

Mini OSD For APM Flight Controller

₹ 1,409.00

Out of stock

Ag++ Flight Controller and NamoAG With Aero GCS Software Stack

₹ 43,188.00

PDRL Ag++ Flight Controller with NamoAG GNSS Module

The PDRL Ag++ Flight Controller combined with the NamoAG GNSS module is a professional-grade control and navigation system designed specifically for agricultural drones. Built for precision, reliability, and automation, this system supports spraying, mapping, and terrain-adaptive operations in demanding farming environments.

Key Features

Designed for Agriculture Drones suitable for spraying, surveying, and mapping applications
High Accuracy GNSS Positioning delivers up to 1.5 m CEP accuracy for reliable navigation
Advanced Obstacle Avoidance enables safe operation in complex and uneven terrain
Terrain Following Capability supports stable low-altitude flight over farmland
Multi-Constellation GNSS Support ensures strong signal reliability and coverage
DroneCAN Communication for stable and noise-resistant data transmission
Integrated AeroGCS Software Support for mission planning, monitoring, and automation

Technical Specifications

Brand: PDRL
Receiver: u-blox NEO-M9N
Processor: ARM Cortex-M4 STM32F4
Dimensions: 61.82 x 61.82 x 24.81mm
Weight: ~30g
Input Voltage: 5V DC
Output Protocol: DroneCAN
Positioning Accuracy: 1.5 m CEP
Antenna: 35 x 35mm
Safety Switch: Available
Buzzer: Available
LED Indicators: Arming LED, Power LED, Notification LED

Ag++ Flight Controller

The Ag++ Flight Controller delivers stable and responsive flight performance using a high-speed processor. It supports advanced safety features such as obstacle avoidance and terrain following, making it suitable for precision agricultural operations.

Supports CAN-based obstacle avoidance sensors
Compatible with CAN-based altimeter for terrain tracking
8 PWM motor outputs and 4 auxiliary PWM/GPIO outputs
2 CAN interfaces and 3 UART ports for flexible connectivity
PPM and S.Bus receiver input support

NamoAG GNSS Module

The NamoAG navigation module provides accurate positioning and reliable performance in agricultural environments. It integrates advanced sensors and GNSS technology for stable navigation.

u-blox NEO-M9N GNSS receiver for high accuracy
Supports multi-constellation satellite tracking
Includes compass, barometer, gyroscope, and accelerometer
Compact and lightweight design for drone integration

AeroGCS Software Support

The system is compatible with AeroGCS software tools for enhanced drone operations, including mission planning, monitoring, and fleet management.

AeroGCS GREEN: Precision spraying and mission execution
AeroGCS Config: Configuration tool for manufacturers
AeroGCS Enterprise: Fleet management and data synchronization

Applications

Suitable for agricultural drones used in crop spraying, mapping, surveying, and automated farming operations.

Package Includes

1 x Ag++ Flight Controller
1 x NamoAG GNSS Module

Out of stock

1000TVL 110 Deg 1/3 CCD NTSC PAL Wide Angle FPV Switchable Camera

₹ 1,253.00

Out of stock

NX4 EVO Flight Controller 3D Gyro Balance

₹ 2,336.00

NX4 EVO Flight Controller for Fixed Wing RC Aircraft

The NX4 EVO Flight Controller is a compact and reliable stabilisation system designed for fixed-wing RC aircraft and airplane models. Built to improve flight stability, handling, and control precision, this flight controller is suitable for both beginners and experienced pilots looking for smoother and more confident flying performance.

Equipped with advanced stabilisation technology, the NX4 EVO helps maintain better balance and control during flight. It supports multiple aircraft configurations, making it suitable for a wide range of fixed-wing builds. With its lightweight design and easy integration, it can be installed in various RC airplane projects without adding unnecessary bulk.

The controller also offers multiple flight modes and adjustable gain control, allowing users to fine-tune flight response based on skill level and aircraft type. Whether used for training, regular flying, or aerobatic applications, the NX4 EVO delivers dependable control and improved flight safety.

Key Features

Designed for fixed-wing RC aircraft and airplane models
Helps improve flight stability and handling precision
Supports multiple flight modes for different skill levels
Compatible with various aircraft tail and wing configurations
Adjustable gain control for customised response tuning
Compact and lightweight design for easy installation
Suitable for training, standard flying, and aerobatic use
Provides better control and flight confidence in different conditions

Technical Specifications

Brand	ReadytoSky
Input Voltage	DC 4.5V – 6V
Operating Temperature	0°C – 50°C
Dimensions	43 x 28 x 15mm
Weight	11g
Response Frequency	100Hz

Warranty Information

All products supplied by PartsBaba are genuine and original. We offer a 14-day replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

Out of stock

1000TVL 1/4 CMOS 90 Deg 2.8mm Lens Mini FPV Camera

₹ 828.00

Out of stock

1200TVL 115-120 Deg Micro Color FPV Camera with Audio

₹ 1,061.00

1200TVL Micro FPV Camera with Audio for RC Drone & Quadcopter

The 1200TVL Micro FPV Camera with Audio is a compact and lightweight camera designed for FPV drones, mini quadcopters, RC aircraft, and custom flying builds. Built to deliver clear color video output with a wide viewing angle, this camera helps improve flight visibility and enhances the overall FPV flying experience.

Equipped with a 5MP sensor, 1280 × 960 resolution, and 1200TVL horizontal resolution, this camera offers sharp and detailed visuals for smooth FPV operation. Its 1.8mm wide-angle lens provides a broad field of view, making it ideal for racing, freestyle, and aerial navigation. The built-in audio output further improves real-time monitoring during flight.

With its ultra-compact 12mm x 12mm size and lightweight 6.4g design, this FPV camera is easy to install on mini drone frames without adding unnecessary weight. It is suitable for users looking for a dependable camera solution for FPV racing, freestyle flying, and custom drone projects.

Key Features

1200TVL horizontal resolution for clear FPV video output
1280 × 960 image resolution with 5 megapixel sensor
1.8mm wide-angle lens with 120° field of view
Built-in monophonic audio output
Low light performance with 0.5LUX minimum illumination
Compact 12mm x 12mm x 12mm size for mini drone builds
Lightweight design at only 6.4g
Suitable for FPV drones, quadcopters, and RC aircraft

Technical Specifications

Brand	ReadytoSky
Resolution	1280 × 960
Pixel	5 Megapixel
Horizontal Resolution	1200TVL
Minimum Illumination	0.5LUX
S/N Ratio	≥ 48dB
Frame Rate	50f/s (PAL)
White Balance	Auto
Audio Out	Monophonic
Video Out	1Vp-p 75Ω CVBS
Image Color	Color
Lens	1.8mm Wide Viewing Angle 120°
Power	3.3V – 5V (Module)
Weight	6.4g
Dimensions	12mm × 12mm × 12mm (L × W × H)

Warranty Information

All products supplied by PartsBaba are genuine and original. We offer a 14-day replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

Out of stock

NX4 PRO Flight Controller 3D Gyro Balance

₹ 2,332.50

The Readytosky NX4 PRO Flight Controller is a compact and advanced stabilization controller designed for RC airplanes and fixed-wing aircraft. Built with 3D gyro balance technology, it helps improve flight stability, control precision, and overall flying confidence, making it suitable for both beginners and experienced pilots.

This flight controller is designed to provide smooth horizontal stabilization and responsive control, helping aircraft maintain better balance during normal flight and aerobatic maneuvers. With support for multiple flight modes such as Rate Mode, Hold Mode, and Gyro Off Mode, the NX4 PRO allows pilots to adjust flight behavior according to their flying style and skill level.

Its lightweight and compact design makes it easy to install in a wide range of RC airplane builds without adding unnecessary weight. Compatible with various aircraft configurations such as T-tail, single aileron, dual aileron, delta wing, and V-tail, this controller offers excellent flexibility for different fixed-wing setups.

Whether you're building a trainer aircraft, upgrading a sport plane, or improving the stability of your RC fixed-wing model, the Readytosky NX4 PRO is a dependable and efficient flight control solution.

Key Features

3D gyro balance flight controller for RC airplanes and fixed-wing aircraft
Provides horizontal stabilization for smoother and more controlled flight
Supports multiple flight modes:
- Rate Mode
- Hold Mode
- Gyro Off Mode
Compact and lightweight for easy installation
Compatible with a wide range of aircraft wing and tail configurations
Helps improve stability, maneuverability, and control precision
Suitable for beginner training and advanced aerobatic flying
Designed for reliable and steady flight performance

Technical Specifications

Specification	Details
Brand	ReadytoSky
Model	NX4 PRO
Input Voltage	DC 5V ~ 6V
Operating Temperature	0°C ~ 50°C
Size	45 x 30 x 14mm
Weight	10g

Compatible Aircraft Configurations

Suitable for:

T-Shaped Tail Aircraft
Single Aileron Aircraft
Dual Aileron Aircraft
Delta Wing Aircraft
V-Tail Aircraft
Hybrid Fixed-Wing Configurations

Applications

Ideal for:

RC Airplanes
Fixed Wing Aircraft
Trainer Planes
Sport Aircraft
Aerobatic RC Planes
DIY RC Aviation Projects

Package Includes

1 x Readytosky NX4 PRO 3D Gyro Balance Flight Controller

Out of stock

1200TVL 2.5mm CMOS Wide Angle PAL FPV Camera

₹ 1,000.23

The Readytosky 1200TVL FPV Camera is a compact and high-performance camera designed for FPV racing drones, quadcopters, and RC aerial systems. Built to provide clear video output, wide-angle visibility, and reliable real-time transmission, this camera is ideal for both beginners and experienced FPV pilots.

Featuring a 2.5mm 130° wide-angle lens, it offers a broad field of view for better situational awareness and smoother navigation during high-speed flights. With 1200TVL horizontal resolution and 1920 x 1080 image resolution, the camera delivers sharp and detailed visuals to enhance your FPV flying experience.

Its compact 22mm x 22mm size makes it suitable for lightweight drone builds, while the DC 5V to 12V power input ensures broad compatibility with common FPV setups. Additional features like white balance control, audio output, and stable video transmission make this camera a dependable choice for drone racing, freestyle flying, and aerial FPV applications.

Key Features

1200TVL horizontal resolution for clear FPV video output
1920 x 1080 resolution for sharp image quality
2.5mm 130° wide-angle lens for better field of view
Suitable for FPV racing drones and quadcopters
Supports clear real-time video transmission
Compact 22mm x 22mm design for lightweight drone builds
Low power operation for efficient performance
White balance ON/OFF function
Built-in monophonic audio output
Compatible with a wide range of FPV systems and power setups

Technical Specifications

Specification	Details
Brand	ReadytoSky
Resolution	1920 x 1080
Pixel	1 Megapixel
Horizontal Resolution	1200TVL
Lens	2.5mm 130°
Image Color	Color
White Balance	ON / OFF
Audio Output	Monophonic
Video Output	1.0Vp-p / 75ohm
Power Input	DC 5V to 12V
Dimensions	22mm x 22mm

Applications

Suitable for:

FPV Racing Drones
Freestyle Quadcopters
RC Drone Builds
FPV Camera Systems
Aerial Navigation
DIY Drone Projects

Package Includes

1 x Readytosky 1200TVL FPV Camera

Out of stock

Ag++ Plug And Play Flight Controller With AeroGCS Software Stack

₹ 35,373.75

The PDRL Ag++ Flight Controller is a high-performance, plug-and-play solution specifically engineered for agriculture drone spraying applications. Designed to deliver precision, efficiency, and reliability, it combines advanced processing power, higher memory capacity, and intelligent control algorithms to handle complex flight and spraying operations seamlessly.

Fully integrated with the AeroGCS software stack, the Ag++ controller simplifies mission planning, configuration, real-time monitoring, and large-scale fleet operations. It is compatible with multi-rotor, VTOL, and fixed-wing drones, making it a versatile choice for modern precision farming and smart agriculture systems.

Key Features

High-performance processor with enhanced memory for smooth and reliable operations
Optimised precision spraying algorithms for accurate and uniform agricultural output
Plug-and-play design for quick installation and faster deployment
Supports multi-rotor, VTOL, and fixed-wing UAV platforms
Integrated with AeroGCS software ecosystem for mission planning and monitoring
Advanced external sensor compatibility for improved data accuracy
Enhanced onboard sensors for stable flight and precise navigation
Broad connectivity options for peripherals, communication modules, and add-ons

Connectivity & I/O Features

8 PWM outputs for motor control
4 auxiliary PWM / GPIO outputs
2 CAN bus interfaces
3 UART ports
Dedicated RC input support (PPM and S.Bus)

Software Compatibility

The Ag++ Flight Controller is supported by the complete AeroGCS software stack, enabling flexible and scalable operations:

AeroGCS GREEN (Android) – For mobile mission planning and execution
AeroGCS Config (Desktop) – For configuration and setup
AeroGCS Orange (Desktop) – For advanced control and monitoring
AeroGCS Enterprise (Web) – For remote fleet management and large-scale operations

Compatible External Modules

The Ag++ controller supports integration with widely used industry components, including:

CAN HUB-12, H30 Altimeter, and R21 Radar by JIYI
Here 3+ GPS and PM02 V3 Power Module from Holybro
Hobbywing Motors
T12 and MK15 remote controllers

Technical Specifications

Specification	Details
Brand	PDRL
Dimensions	89 × 45 × 39 mm
Weight	80g

Why Choose PDRL Ag++ Flight Controller?

The PDRL Ag++ Flight Controller is built for professionals who require precision agriculture performance, reliable control, and seamless system integration. Its plug-and-play design, advanced processing capability, and AeroGCS ecosystem support make it an ideal choice for modern agricultural drone systems.

Whether you are managing spraying operations, mapping fields, or running large drone fleets, the Ag++ provides the stability, accuracy, and efficiency needed for high-performance UAV missions.

Applications

Suitable for:

Agricultural spraying drones
Precision farming UAVs
Multi-rotor drone systems
VTOL drone platforms
Fixed-wing UAV applications
Smart agriculture and automation systems

Key Advantages

Fast deployment with plug-and-play setup
Accurate and efficient spraying performance
Scalable software ecosystem for fleet management
Flexible integration with industry-standard modules
Reliable operation in demanding agricultural environments

Resources

📄 Datasheet 📘 Presentation

Out of stock

AeroFC V2 Flight Controller Compatible With Open-Source Firmware & GCS

₹ 42,328.75

The PDRL AeroFC V2 Flight Controller is a high-performance, next-generation UAV flight controller engineered for professional drone applications requiring precision, reliability, and intelligent mission handling. Designed and built in India, AeroFC V2 is suitable for a wide range of unmanned aerial vehicle operations including agriculture, mapping, logistics, surveillance, inspection, and custom UAV development.

Powered by a dual-processor architecture featuring the STM32H7 ARM Cortex-M7 main processor and STM32F1 ARM Cortex-M3 coprocessor, the AeroFC V2 delivers fast processing, advanced sensor integration, stable flight control, and flexible connectivity. It also supports open-source flight firmware and ground control software, making it ideal for developers, system integrators, and drone manufacturers.

Key Features

High-performance dual-processor architecture for stable and responsive flight control
Compatible with open-source flight firmware and ground control software (GCS)
Equipped with a triple IMU sensor system for improved flight accuracy and redundancy
Supports advanced external sensors for navigation and mission-specific applications
Provides broad connectivity options for telemetry, GPS, UART, CAN, I2C, USB, and more
Built with aerospace-grade aluminum chassis for durability and thermal stability
Designed for professional UAV platforms operating in demanding environments
Made in India for mission-ready reliability across multiple use cases

Technical Specifications

Specification	Details
Brand	PDRL
Main Processor	STM32H7 Series 32-Bit ARM Cortex-M7 Core, 480 MHz
Coprocessor	STM32F1 Series 32-Bit ARM Cortex-M3 Core, 72 MHz
Supported RC Signals	PPM / SBUS
Connectors	Standard and widely used connectors
Sensors	Triple IMU System
Sensor Details	IMU1 (Isolated), IMU3 (Isolated), MAG1 (Isolated), MAG2 + MAG3 (External), BARO1 (Isolated), BARO1 (On Board)
Supported Vehicle Types	Survey Drone, Spraying Drone
Chassis Material	Aerospace Grade Aluminum
Dimensions	89 × 45 × 30 mm
Operating Temperature	-40°C to +85°C
Motor PWM I/Os	8
Auxiliary PWM / Digital I/Os	4
Dedicated Telemetry Interface	1
GPS Support	Up to 2 GPS modules
Auxiliary UARTs	2
I2C Interface	1
CAN Interface	2
RCIN Interface	1
USB Interface	1
SD Card Interface	1
Power / Current / Voltage Measurement Interface	1

Why Choose AeroFC V2?

The PDRL AeroFC V2 is built for users who need a powerful, flexible, and dependable flight control solution for modern UAV applications. Its advanced processor combination, redundant sensor system, and wide interface support make it an ideal platform for commercial drone development and professional deployment.

Whether you are building a drone for surveying, spraying, mapping, or custom aerial applications, AeroFC V2 provides the control accuracy, connectivity, and scalability needed for demanding missions.

Applications

Suitable for: