JST Connectors

The 4 pin JST 1.25mm connector features a 30cm length with female connectors on both ends, designed for secure and reliable electrical connections in compact electronic assemblies. Its 1.25mm pitch makes it compatible with a wide range of small-scale components, ideal for projects requiring precise and stable wiring solutions. This cable is well-suited for use in robotics, LED lighting, sensors, and other electronic devices demanding durability and consistent signal transmission.

• Dual female connectors allow for straightforward connection between components without soldering
• 1.25mm pitch ensures compatibility with JST standard headers and compact circuits
• 30cm length provides ample reach for flexible wiring in tight spaces
• Durable construction maintains stable electrical contact and resists wear
• Ideal for electronic projects such as robotics, sensors, and LED setups
• Compact size supports neat cable management in small devices

This 4 pin JST XH connector features a 2.5mm pitch and comes with one side female terminals attached to 30cm wires. Designed for secure and reliable electrical connections, it is ideal for use in various electronic components and circuit assemblies. Its compact size and standard pin configuration make it compatible with a wide range of modules requiring a 4-pin interface, ensuring versatility across multiple applications in electronics projects and repairs.

• 4 pin design tailored for stable multi-wire connections in compact spaces
• 2.5mm pitch ensures precise alignment and compatibility with JST XH series components
• One side female connector with secure locking to prevent accidental disconnections
• 30cm wire length provides ample reach for flexible installation in various setups
• Suitable for electronic projects, PCB wiring, and small device repairs requiring reliable connectors
• Constructed with durable materials to maintain consistent electrical performance over time

The 5 pin JST 1.25mm Housing is a compact and reliable connector component designed for precise electronic assembly. Its 1.25mm pitch suits small-scale wiring applications, offering secure and efficient connections in tight spaces. Compatible with various JST 5-pin terminals, this housing is ideal for projects requiring durable and organized wiring solutions, such as in robotics, consumer electronics, and circuit board configurations.

• Compact 1.25mm pitch enables high-density wiring in confined areas without sacrificing connection quality
• Five-pin configuration supports multiple signal or power lines within a single housing for streamlined circuitry
• Durable construction ensures long-lasting electrical contact and mechanical stability in demanding environments
• Compatible with standard JST terminals for easy integration into existing systems and seamless replacement
• Secure locking mechanism reduces accidental disconnections and enhances overall connection reliability
• Widely used in electronics including robotics, sensors, and small appliances requiring precise connector solutions

The 5 pin JST XH 2.5mm Housing is a compact electrical connector designed for reliable connections in various electronic components and assemblies. Its 2.5mm pitch and 5-pin configuration make it ideal for wiring harnesses, circuit boards, and other applications requiring secure, low-profile interfacing. This connector housing supports JST XH series terminals, ensuring compatibility with a wide range of devices and facilitating easy installation and maintenance in both industrial and consumer electronics.

• 5-pin layout provides stable multi-wire connections for versatile electronic setups.
• 2.5mm pitch offers a compact design that fits tightly into small spaces without sacrificing performance.
• Constructed to accommodate JST XH terminals, guaranteeing reliable electrical contacts and compatibility.
• Designed for use in wiring harnesses, circuit boards, and other electronics requiring secure and organized connections.
• Durable housing material ensures longevity and resistance to wear in demanding environments.
• Facilitates straightforward assembly and disassembly, simplifying maintenance and upgrades.
• Widely used in components where low-profile, dependable connections are essential.

The 7 pin JST 1.25mm one side female connector with 30cm wires is designed for reliable electrical connections in compact electronic assemblies. Featuring a 1.25mm pitch and seven pins, it offers a secure and organized interface for various components. The 30cm pre-attached wires provide flexibility for installations, making it suitable for projects requiring precise wiring and easy connectivity in tight spaces.

• Compact 1.25mm pitch ensures compatibility with a wide range of electronic components and boards.
• Seven-pin configuration supports multiple signal or power lines in a single connector.
• 30cm wire length offers convenient reach for flexible wiring setups and tidy cable management.
• One side female design guarantees secure connections to male counterparts in various assemblies.
• Durable materials maintain reliable electrical contact and mechanical stability over time.
• Ideal for use in prototyping, small electronics, robotics, and embedded systems.
• Compatible with standard JST mating connectors for ease of integration.

This 4-pin JST connector features a 1.25mm pitch and is equipped with Teflon PTFE insulated wiring rated at 28/7/36 AWG. Designed with a one-side female connector and a 15cm length, it offers a reliable quick disconnect solution ideal for compact electronic assemblies. Its durable Teflon insulation ensures resistance to heat and chemicals, making it suitable for precise and space-conscious component connections in various electronic applications.

• Compact 1.25mm pin spacing enables dense circuit board layouts without sacrificing reliability
• Teflon PTFE insulation provides excellent thermal and chemical resistance for long-lasting performance
• 28/7/36 AWG stranded wire balances flexibility with stable electrical conductivity
• 15cm wire length offers versatile reach for connecting components in tight spaces
• One-side female connector ensures quick and secure disconnection in modular setups
• Ideal for space-saving electronics where compact and dependable connectors are essential

Product Description

The Crimping Pins for JST PH 2.0mm are precision-engineered open-barrel crimp terminals designed for use with JST PH 2.0mm connector housings. These terminals provide secure and reliable electrical connections for a wide range of applications, including drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, and DIY electronics projects.

Compatible with the JST PH 2.0mm series, these crimp pins are designed to fit securely into JST PH housings after crimping onto the wire. They feature a locking lance that firmly secures the terminal inside the housing, ensuring reliable contact and preventing accidental pull-out during operation.

Manufactured from high-quality phosphor bronze or copper alloy with tin plating, the terminals offer excellent electrical conductivity, low contact resistance, and strong resistance to oxidation and corrosion. Their precision stamping ensures consistent crimp quality and dependable long-term performance.

Suitable for use with 28–24 AWG wires (depending on wire insulation and terminal specification), these crimp pins are ideal for creating custom cable assemblies, repairing damaged connectors, or building professional-grade wire harnesses.

Whether you're assembling drone wiring, creating custom sensor cables, or manufacturing electronic devices, the Crimping Pins for JST PH 2.0mm provide a durable and dependable connection solution.

Key Features

• Compatible with JST PH 2.0mm connector housings
• Precision open-barrel crimp terminals
• Secure locking mechanism for reliable terminal retention
• Tin-plated copper alloy/phosphor bronze construction
• Low contact resistance for efficient electrical performance
• Excellent corrosion and oxidation resistance
• Suitable for custom wire harness assembly
• Compatible with 28–24 AWG wires
• Easy to crimp using standard JST-compatible crimping tools
• Durable construction for long service life

Applications & Use Cases

The JST PH 2.0mm Crimping Pins are commonly used in:

• Drones and UAV electronics
• Robotics and automation
• Battery Management Systems (BMS)
• IoT devices
• Sensor modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial electronic equipment
• DIY electronics and custom cable assemblies

Technical Specifications

• Product Type: JST PH 2.0mm Crimp Terminal
• Connector Series: JST PH 2.0mm
• Terminal Type: Female Crimp Terminal
• Contact Material: Phosphor Bronze / Copper Alloy
• Contact Plating: Tin Plated
• Compatible Wire Size: 28–24 AWG
• Compatible Housing: JST PH 2.0mm Series Housing
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C

Why Choose These Crimping Pins?

The Crimping Pins for JST PH 2.0mm are the ideal choice for building reliable and professional wire harnesses. Their precision design, secure locking mechanism, and durable plated contacts ensure long-lasting electrical performance, making them suitable for drones, robotics, embedded systems, and a wide range of electronic applications.

Package Includes

• 1 × JST PH 2.0mm Crimping Pin (Female Terminal)

Product Description

The 9 Pin JST PH 2.0mm Housing is a high-quality wire-to-board connector housing designed for secure and reliable electrical connections in compact electronic applications. Compatible with the JST PH 2.0mm series, this 9-pin housing is ideal for use in drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, and DIY electronics projects.

Designed to accommodate 9 crimp terminals (sold separately), the housing provides a secure, polarized connection that prevents incorrect mating and ensures stable electrical performance. Its compact design makes it suitable for high-density wiring applications where space is limited while maintaining excellent connection reliability.

Manufactured from high-quality PA66 (Nylon) thermoplastic, the housing offers excellent mechanical strength, electrical insulation, and resistance to heat and wear. The locking design securely mates with compatible JST PH 2.0mm 9-pin male headers, minimizing the risk of accidental disconnection caused by vibration or movement.

Whether you're assembling custom wire harnesses, repairing electronic devices, or building embedded systems, the 9 Pin JST PH 2.0mm Housing provides a durable and dependable connector solution.

Key Features

• JST PH 2.0mm compatible housing
• 9-pin wire-to-board connector
• 2.0mm pitch
• Polarized design prevents incorrect insertion
• Compatible with JST PH crimp terminals
• Secure locking mechanism for reliable connections
• High-strength PA66 (Nylon) insulating housing
• Compact design for space-constrained applications
• Easy terminal insertion and assembly
• Durable construction for long service life

Applications & Use Cases

The 9 Pin JST PH 2.0mm Housing is commonly used in:

• Drones and UAV electronics
• Battery Management Systems (BMS)
• Robotics and automation
• IoT devices
• Sensor modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial electronic equipment
• DIY electronics and custom cable assemblies

Technical Specifications

• Connector Type: JST PH Compatible Housing
• Number of Pins: 9
• Pitch: 2.0mm
• Housing Material: PA66 (Nylon)
• Color: White/Natural
• Mounting Style: Wire-to-board
• Terminal Type: Compatible with JST PH crimp terminals (sold separately)
• Compatible Header: JST PH 2.0mm 9-pin male header
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A (depending on terminals and wire gauge)
• Operating Temperature: -25°C to +85°C

Why Choose This Housing?

The 9 Pin JST PH 2.0mm Housing is an excellent choice for creating compact and reliable wire harnesses. Its polarized design ensures correct mating, while the durable nylon construction provides long-lasting mechanical strength and electrical insulation. Compatible with standard JST PH terminals and headers, it is ideal for drones, robotics, battery-powered devices, and a wide range of electronic projects.

Package Includes

• 1 × 9 Pin JST PH 2.0mm Housing

Product Description

The 9 Pin JST PH 2.0mm SMT Header Vertical Straight Top Entry is a compact and reliable surface-mount wire-to-board connector designed to provide secure electrical connections in space-constrained electronic applications. Featuring a 2.0mm pitch, 9-pin configuration, and vertical straight top-entry design, this connector is suitable for applications requiring multiple signal connections while maintaining a compact PCB layout.

Compatible with the JST PH 2.0mm series, this header is designed for Surface Mount Technology (SMT) assembly, making it suitable for automated PCB manufacturing and high-density circuit board designs. The vertical top-entry orientation allows the mating connector to connect directly above the PCB, helping optimize component placement and cable management.

The connector features high-quality copper alloy contacts with tin plating, providing excellent electrical conductivity, low contact resistance, and long-term reliability. Its high-temperature thermoplastic housing offers superior insulation and withstands standard SMT reflow soldering processes, ensuring durability in demanding electronic applications.

Ideal for drones, robotics, IoT devices, sensors, embedded electronics, battery systems, and consumer electronics, the 9 Pin JST PH 2.0mm SMT Header Vertical Straight Top Entry provides a dependable and space-efficient wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible SMT header
• 9-pin wire-to-board connector
• 2.0mm pitch
• Surface Mount Technology (SMT) design
• Vertical straight top-entry orientation
• Polarized connector design for secure mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Suitable for automated PCB assembly
• Compact and space-saving design
• Reliable electrical and mechanical performance

Applications & Use Cases

The 9 Pin JST PH 2.0mm SMT Vertical Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation systems
• Battery Management Systems (BMS)
• IoT devices
• Sensor modules
• Embedded control systems
• LED lighting systems
• Consumer electronics
• Arduino-compatible hardware
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible SMT Header
• Number of Pins: 9
• Pitch: 2.0mm
• Mounting Type: Surface Mount Technology (SMT)
• Orientation: Vertical Straight (Top Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 9-pin Female Housing

Why Choose This Header?

The 9 Pin JST PH 2.0mm SMT Header Vertical Straight Top Entry is designed for applications requiring a compact, reliable, and high-density PCB connection. Its SMT mounting capability supports efficient production assembly, while the vertical design saves board space and provides organized cable routing. It is an excellent choice for drones, robotics, embedded electronics, and other compact electronic systems.

Package Includes

• 1 × 9 Pin JST PH 2.0mm SMT Header Vertical Straight Top Entry Connector

Product Description

The 9 Pin JST PH 2.0mm One Side Female 30cm Cable is a high-quality pre-crimped wire harness designed to provide secure and reliable wire-to-board connections for electronic applications. Featuring a 9-pin JST PH 2.0mm female connector on one end and 30cm flying leads on the other end, this cable offers a convenient solution for connecting PCBs, modules, sensors, and electronic components without requiring manual crimping.

Compatible with the JST PH 2.0mm series, this cable is widely used in drones, robotics, battery management systems (BMS), IoT devices, sensors, embedded systems, consumer electronics, and DIY electronics projects. The 30cm cable length provides flexibility for routing while maintaining an organized and efficient wiring setup.

The cable is manufactured using high-quality stranded copper conductors with durable PVC insulation, ensuring excellent conductivity, flexibility, and long-term reliability. The factory-crimped JST PH female connector provides a secure connection with compatible JST PH 2.0mm male headers, reducing the risk of loose contacts and intermittent connections.

Whether used for custom cable assemblies, prototype development, or electronic device integration, the 9 Pin JST PH 2.0mm One Side Female 30cm Cable provides a reliable and easy-to-install wiring solution.

Key Features

• JST PH 2.0mm compatible female connector
• 9-pin configuration
• 30cm cable length
• Female connector on one end with flying wires on the other end
• Factory-crimped terminals for secure connections
• High-quality stranded copper wires
• Flexible PVC insulation
• Compact and lightweight design
• Easy plug-and-play installation
• Reliable electrical performance

Applications & Use Cases

The 9 Pin JST PH 2.0mm One Side Female Cable is commonly used in:

• Drones and UAV electronics
• Robotics and automation systems
• Battery Management Systems (BMS)
• IoT devices
• Sensor and control modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and custom wiring harnesses

Technical Specifications

• Connector Type: JST PH 2.0mm Female Connector
• Number of Pins: 9
• Pitch: 2.0mm
• Cable Length: 30cm
• Cable Type: One Side Female with Flying Leads
• Conductor Material: Stranded Copper
• Insulation Material: PVC
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 9-pin Male Header

Why Choose This Cable?

The 9 Pin JST PH 2.0mm One Side Female 30cm Cable is an ideal choice for applications requiring a ready-made wiring solution with a secure JST connection on one side and flexible wire access on the other. Its durable construction, compact design, and reliable connector performance make it suitable for drones, robotics, embedded electronics, and custom electronic projects.

Package Includes

• 1 × 9 Pin JST PH 2.0mm One Side Female 30cm Cable

Product Description

The 9 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry is a high-quality PCB-mounted wire-to-board connector designed to provide secure and reliable electrical connections in compact electronic systems. Featuring a 2.0mm pitch, 9-pin configuration, and horizontal right-angle side-entry design, this connector is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, industrial control systems, and embedded electronics.

Compatible with the JST PH 2.0mm series, this header is designed for through-hole (THT) PCB mounting, providing excellent mechanical strength and long-term durability. The horizontal right-angle orientation allows cables to connect parallel to the PCB, making it ideal for applications requiring low-profile cable routing and compact enclosure designs.

The connector features high-quality copper alloy contacts with tin plating, ensuring low contact resistance, reliable electrical conductivity, and excellent corrosion resistance. Its high-temperature thermoplastic housing offers superior insulation and withstands soldering temperatures, making it suitable for both prototype development and mass production.

Whether you're designing a drone flight controller, building an embedded system, or assembling industrial electronic equipment, the 9 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry provides a compact, durable, and dependable wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible PCB header
• 9-pin wire-to-board connector
• 2.0mm pitch
• Through-hole (THT) PCB mounting
• Horizontal right-angle side-entry design
• Polarized connector prevents incorrect mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Strong mechanical retention after soldering
• Compact, low-profile design
• Reliable electrical performance and easy installation

Applications & Use Cases

The 9 Pin JST PH 2.0mm Right Angle Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation
• Battery Management Systems (BMS)
• IoT devices
• Sensor modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible Header
• Number of Pins: 9
• Pitch: 2.0mm
• Mounting Type: Through-Hole (THT)
• Orientation: Horizontal Right Angle (Side Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 9-pin Female Housing

Why Choose This Header?

The 9 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry is an excellent choice for compact PCB layouts requiring side-entry cable routing. Its through-hole construction provides superior mechanical stability, while the polarized design ensures secure and reliable mating. Ideal for drones, robotics, industrial electronics, and embedded systems, it delivers dependable performance and long service life.

Package Includes

• 1 × 9 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry Connector

The 9 pin JST PH 2.0mm SMT Header Horizontal Right Angle Side Entry is a compact connector designed for efficient PCB to wire connections. It facilitates quick disconnects and reliable signal or power transfer between boards and wires. Featuring a 2.0mm pitch and horizontal right-angle orientation, this surface-mount technology (SMT) header fits neatly on circuit boards where space is limited. Ideal for electronics projects requiring secure and organized wiring, it supports a variety of applications in consumer electronics and prototyping.

• 9-pin configuration allows multiple signals or power lines to connect simultaneously for streamlined circuit design.
• The 2.0mm pitch spacing ensures precise alignment with corresponding JST PH connectors for consistent performance.
• Horizontal right-angle side entry minimizes vertical space usage, making it perfect for compact PCB layouts.
• Surface-mount technology (SMT) enables automated assembly and strong mechanical attachment to the board.
• Designed to provide quick disconnect capability, simplifying maintenance and upgrades without soldering.
• Compatible with standard JST PH series wires and connectors, supporting flexible wiring solutions.
• Offers reliable electrical connections suitable for both signal transmission and power delivery.
• Durable construction withstands repeated connections and disconnections, enhancing long-term usability.

Product Description

The 8 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry is a high-quality PCB-mounted wire-to-board connector designed to provide secure and reliable electrical connections in compact electronic systems. Featuring a 2.0mm pitch, 8-pin configuration, and vertical straight top-entry design, this connector is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, industrial control systems, and embedded electronics.

Compatible with the JST PH 2.0mm series, this header is designed for through-hole (THT) PCB mounting, providing excellent mechanical strength and long-term durability. The vertical top-entry orientation allows cables to connect directly from above the PCB, making it suitable for applications requiring efficient cable management and vertical board-to-wire connections.

The connector features high-quality copper alloy contacts with tin plating, ensuring low contact resistance, reliable electrical conductivity, and excellent corrosion resistance. Its high-temperature thermoplastic housing offers superior insulation and withstands soldering temperatures, making it suitable for both prototype development and mass production.

Whether you're designing a multi-signal PCB, assembling a drone controller, or building industrial and embedded electronic systems, the 8 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry provides a compact, reliable, and durable wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible PCB header
• 8-pin wire-to-board connector
• 2.0mm pitch
• Through-hole (THT) PCB mounting
• Vertical straight top-entry design
• Polarized connector prevents incorrect mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Strong mechanical retention after soldering
• Compact and reliable design
• Easy installation and dependable electrical performance

Applications & Use Cases

The 8 Pin JST PH 2.0mm Vertical Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation systems
• Battery Management Systems (BMS)
• IoT devices
• Sensor and control modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible Header
• Number of Pins: 8
• Pitch: 2.0mm
• Mounting Type: Through-Hole (THT)
• Orientation: Vertical Straight (Top Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 8-pin Female Housing

Why Choose This Header?

The 8 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry is ideal for applications requiring multiple signal or power connections in a compact PCB layout. Its through-hole construction provides excellent mechanical stability, while the polarized design ensures secure and reliable mating. Suitable for drones, robotics, industrial electronics, and embedded systems, it delivers consistent performance and long-term durability.

Package Includes

• 1 × 8 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry Connector

Product Description

The 8 Pin JST PH 2.0mm SMT Header Vertical Straight Top Entry is a compact and reliable surface-mount wire-to-board connector designed to provide secure electrical connections in space-constrained electronic applications. Featuring a 2.0mm pitch, 8-pin configuration, and vertical straight top-entry design, this connector is ideal for applications requiring multiple signal connections while maintaining an efficient PCB layout.

Compatible with the JST PH 2.0mm series, this header is designed for Surface Mount Technology (SMT) assembly, making it suitable for automated PCB manufacturing and high-density circuit board designs. The vertical top-entry orientation allows the mating connector to connect directly from above the PCB, enabling efficient cable routing and optimized component placement.

The connector features high-quality copper alloy contacts with tin plating, ensuring excellent electrical conductivity, low contact resistance, and reliable long-term performance. Its high-temperature thermoplastic housing provides superior insulation and is capable of withstanding standard SMT reflow soldering processes, making it suitable for both prototype and mass-production applications.

Ideal for drones, robotics, IoT devices, sensors, embedded systems, battery management systems, and consumer electronics, the 8 Pin JST PH 2.0mm SMT Header Vertical Straight Top Entry offers a durable, compact, and dependable wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible SMT header
• 8-pin wire-to-board connector
• 2.0mm pitch
• Surface Mount Technology (SMT) design
• Vertical straight top-entry orientation
• Polarized connector design prevents incorrect mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Suitable for automated PCB assembly
• Compact and space-saving design
• Reliable electrical and mechanical performance

Applications & Use Cases

The 8 Pin JST PH 2.0mm SMT Vertical Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation systems
• Battery Management Systems (BMS)
• IoT devices
• Sensor modules
• Embedded control systems
• LED lighting systems
• Consumer electronics
• Arduino-compatible hardware
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible SMT Header
• Number of Pins: 8
• Pitch: 2.0mm
• Mounting Type: Surface Mount Technology (SMT)
• Orientation: Vertical Straight (Top Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 8-pin Female Housing

Why Choose This Header?

The 8 Pin JST PH 2.0mm SMT Header Vertical Straight Top Entry is an excellent choice for compact electronic designs requiring a reliable and space-efficient wire connection. Its SMT construction supports automated assembly, while the vertical top-entry design allows neat cable placement and optimized PCB layouts. It is widely suitable for drones, robotics, embedded electronics, and other high-density electronic applications.

Package Includes

• 1 × 8 Pin JST PH 2.0mm SMT Header Vertical Straight Top Entry Connector

Product Description

The 8 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry is a high-quality PCB-mounted wire-to-board connector designed to provide secure and reliable electrical connections in compact electronic systems. Featuring a 2.0mm pitch, 8-pin configuration, and horizontal right-angle side-entry design, this connector is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, industrial control systems, and embedded electronics.

Compatible with the JST PH 2.0mm series, this header is designed for through-hole (THT) PCB mounting, providing excellent mechanical strength and long-term durability. The horizontal right-angle orientation allows cables to connect parallel to the PCB, making it ideal for applications requiring low-profile cable routing and compact enclosure designs.

The connector features high-quality copper alloy contacts with tin plating, ensuring low contact resistance, reliable electrical conductivity, and excellent corrosion resistance. Its high-temperature thermoplastic housing offers superior insulation and withstands soldering temperatures, making it suitable for both prototype development and mass production.

Whether you're designing a drone flight controller, building an embedded system, or assembling industrial electronic equipment, the 8 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry provides a compact, durable, and dependable wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible PCB header
• 8-pin wire-to-board connector
• 2.0mm pitch
• Through-hole (THT) PCB mounting
• Horizontal right-angle side-entry design
• Polarized connector prevents incorrect mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Strong mechanical retention after soldering
• Compact, low-profile design
• Reliable electrical performance and easy installation

Applications & Use Cases

The 8 Pin JST PH 2.0mm Right Angle Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation
• Battery Management Systems (BMS)
• IoT devices
• Sensor modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible Header
• Number of Pins: 8
• Pitch: 2.0mm
• Mounting Type: Through-Hole (THT)
• Orientation: Horizontal Right Angle (Side Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 8-pin Female Housing

Why Choose This Header?

The 8 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry is an excellent choice for compact PCB layouts requiring side-entry cable routing. Its through-hole construction provides superior mechanical stability, while the polarized design ensures secure and reliable mating. Ideal for drones, robotics, industrial electronics, and embedded systems, it delivers dependable performance and long service life.

Package Includes

• 1 × 8 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry Connector

Product Description

The 8 Pin JST PH 2.0mm Housing is a high-quality wire-to-board connector housing designed for secure and reliable electrical connections in compact electronic applications. Compatible with the JST PH 2.0mm series, this 8-pin housing is ideal for use in drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, and DIY electronics projects.

Designed to accommodate 8 crimp terminals (sold separately), the housing provides a secure, polarized connection that prevents incorrect mating and ensures stable electrical performance. Its compact design makes it suitable for high-density wiring applications where space is limited while maintaining excellent connection reliability.

Manufactured from high-quality PA66 (Nylon) thermoplastic, the housing offers excellent mechanical strength, electrical insulation, and resistance to heat and wear. The locking design securely mates with compatible JST PH 2.0mm 8-pin male headers, minimizing the risk of accidental disconnection caused by vibration or movement.

Whether you're assembling custom wire harnesses, repairing electronic devices, or building embedded systems, the 8 Pin JST PH 2.0mm Housing provides a durable and dependable connector solution.

Key Features

• JST PH 2.0mm compatible housing
• 8-pin wire-to-board connector
• 2.0mm pitch
• Polarized design prevents incorrect insertion
• Compatible with JST PH crimp terminals
• Secure locking mechanism for reliable connections
• High-strength PA66 (Nylon) insulating housing
• Compact design for space-constrained applications
• Easy terminal insertion and assembly
• Durable construction for long service life

Applications & Use Cases

The 8 Pin JST PH 2.0mm Housing is commonly used in:

• Drones and UAV electronics
• Battery Management Systems (BMS)
• Robotics and automation
• IoT devices
• Sensor modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial electronic equipment
• DIY electronics and custom cable assemblies

Technical Specifications

• Connector Type: JST PH Compatible Housing
• Number of Pins: 8
• Pitch: 2.0mm
• Housing Material: PA66 (Nylon)
• Color: White/Natural
• Mounting Style: Wire-to-board
• Terminal Type: Compatible with JST PH crimp terminals (sold separately)
• Compatible Header: JST PH 2.0mm 8-pin male header
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A (depending on terminals and wire gauge)
• Operating Temperature: -25°C to +85°C

Why Choose This Housing?

The 8 Pin JST PH 2.0mm Housing is an excellent choice for creating compact and reliable wire harnesses. Its polarized design ensures correct mating, while the durable nylon construction provides long-lasting mechanical strength and electrical insulation. Compatible with standard JST PH terminals and headers, it is ideal for drones, robotics, battery-powered devices, and a wide range of electronic projects.

Package Includes

• 1 × 8 Pin JST PH 2.0mm Housing

Product Description

The 8 Pin JST PH 2.0mm SMT Header Horizontal Right Angle Side Entry is a compact, high-quality surface-mount (SMT) wire-to-board connector designed to provide secure and reliable electrical connections in space-constrained electronic devices. Featuring a 2.0mm pitch, 8-pin configuration, and horizontal right-angle side-entry design, this connector is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, and embedded systems.

Compatible with the JST PH 2.0mm series, this header is designed for Surface Mount Technology (SMT), making it suitable for automated PCB assembly and high-density circuit board layouts. The horizontal right-angle orientation allows cables to connect parallel to the PCB, enabling low-profile installations and efficient cable routing in compact enclosures.

The connector features high-quality copper alloy contacts with tin plating, ensuring excellent electrical conductivity, low contact resistance, and long-term corrosion resistance. Its high-temperature thermoplastic housing is designed to withstand standard SMT reflow soldering processes while providing superior insulation and mechanical durability.

Whether you're designing a drone flight controller, an IoT module, or compact embedded electronics, the 8 Pin JST PH 2.0mm SMT Header Horizontal Right Angle Side Entry offers a reliable, durable, and space-saving wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible SMT header
• 8-pin wire-to-board connector
• 2.0mm pitch
• Surface Mount Technology (SMT) design
• Horizontal right-angle side-entry configuration
• Polarized connector prevents incorrect mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Suitable for automated PCB assembly
• Compact, low-profile design
• Reliable electrical performance and secure PCB mounting

Applications & Use Cases

The 8 Pin JST PH 2.0mm SMT Right Angle Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation
• Battery Management Systems (BMS)
• IoT devices
• Sensor modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino-compatible hardware
• Industrial control equipment
• DIY electronics and compact PCB designs

Technical Specifications

• Connector Type: JST PH Compatible SMT Header
• Number of Pins: 8
• Pitch: 2.0mm
• Mounting Type: Surface Mount Technology (SMT)
• Orientation: Horizontal Right Angle (Side Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 8-pin Female Housing

Why Choose This Header?

The 8 Pin JST PH 2.0mm SMT Header Horizontal Right Angle Side Entry is an excellent choice for modern, high-density PCB designs requiring a compact and reliable side-entry wire connection. Its SMT construction supports automated assembly, while the polarized design ensures secure mating and dependable electrical performance. Perfect for drones, robotics, industrial electronics, and embedded systems where space optimization is essential.

Package Includes

• 1 × 8 Pin JST PH 2.0mm SMT Header Horizontal Right Angle Side Entry Connector

Product Description

The 8 Pin JST PH 2.0mm Both Side Female 30cm Cable is a high-quality pre-crimped wire harness designed to provide secure and reliable wire-to-board connections between two compatible JST PH 2.0mm male headers. Featuring 8-pin JST PH 2.0mm female connectors on both ends and a 30cm cable length, this ready-to-use cable simplifies wiring, reduces assembly time, and ensures dependable electrical performance.

Compatible with the JST PH 2.0mm series, this cable is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, embedded systems, consumer electronics, and DIY electronics projects. The 30cm cable provides ample length for flexible routing while maintaining a clean and organized installation.

Manufactured using high-quality stranded copper conductors with durable PVC insulation, the cable offers excellent conductivity, flexibility, and long service life. The factory-crimped female connectors ensure a secure fit with compatible male headers, minimizing the risk of loose or intermittent connections.

Whether you're connecting controller boards, sensor modules, displays, or custom electronic assemblies, the 8 Pin JST PH 2.0mm Both Side Female 30cm Cable provides a reliable and convenient plug-and-play wiring solution.

Key Features

• JST PH 2.0mm compatible female connectors on both ends
• 8-pin configuration
• 30cm cable length
• Factory-crimped terminals for reliable connections
• High-quality stranded copper conductors
• Flexible and durable PVC insulation
• Excellent electrical conductivity
• Secure and stable connector fit
• Ready-to-use—no crimping required
• Ideal for compact electronic assemblies

Applications & Use Cases

The 8 Pin JST PH 2.0mm Both Side Female Cable is commonly used in:

• Drones and UAV electronics
• Robotics and automation systems
• Battery Management Systems (BMS)
• IoT devices
• Sensor and control modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and custom wiring harnesses

Technical Specifications

• Connector Type: JST PH 2.0mm Female to Female
• Number of Pins: 8
• Pitch: 2.0mm
• Cable Length: 30cm
• Cable Type: Both Side Female
• Conductor Material: Stranded Copper
• Insulation Material: PVC
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 8-pin Male Header

Why Choose This Cable?

The 8 Pin JST PH 2.0mm Both Side Female 30cm Cable is an ideal choice for creating reliable board-to-board or module-to-module connections without the need for soldering or manual crimping. Its factory-assembled connectors, durable cable construction, and flexible 30cm length make it perfect for drones, robotics, embedded systems, industrial electronics, and rapid prototyping.

Package Includes

• 1 × 8 Pin JST PH 2.0mm Both Side Female 30cm Cable

The 8 pin JST PH connector with a 2.0mm pitch offers a reliable solution for connecting PCB boards to wires or linking multiple boards. This female-to-female connector, measuring 10cm in length, is designed for efficient signal and power transfer in compact electronic assemblies. Its dual-sided female design enhances flexibility and ease of use, making it ideal for various electronics projects and component integrations.

• 8 pin configuration ensures multiple connections for complex circuits and data transfer.
• 2.0mm pitch provides compatibility with standard JST PH series components.
• Both side female connectors facilitate quick disconnects and flexible wiring options.
• 10cm cable length offers ample reach for connecting boards without clutter.
• Designed to efficiently transfer both signals and power, enhancing circuit reliability.
• Compact size supports use in tight spaces and small-scale electronics projects.
• Suitable for hobbyist and professional electronics applications requiring secure connector interfaces.

Product Description

The 7 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry is a high-quality PCB-mounted wire-to-board connector designed to provide secure and reliable electrical connections in compact electronic systems. Featuring a 2.0mm pitch, 7-pin configuration, and vertical straight top-entry design, this connector is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, industrial control systems, and embedded electronics.

Compatible with the JST PH 2.0mm series, this header is designed for through-hole (THT) PCB mounting, providing excellent mechanical strength and long-term durability. The vertical top-entry orientation allows cables to connect directly from above the PCB, making it suitable for applications requiring efficient cable management and vertical board-to-wire connections.

The connector features high-quality copper alloy contacts with tin plating, ensuring low contact resistance, reliable electrical conductivity, and excellent corrosion resistance. Its high-temperature thermoplastic housing offers superior insulation and withstands soldering temperatures, making it suitable for both prototype development and mass production.

Whether you're designing a multi-signal PCB, assembling a drone controller, or building industrial and embedded electronic systems, the 7 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry provides a compact, reliable, and durable wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible PCB header
• 7-pin wire-to-board connector
• 2.0mm pitch
• Through-hole (THT) PCB mounting
• Vertical straight top-entry design
• Polarized connector prevents incorrect mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Strong mechanical retention after soldering
• Compact and reliable design
• Easy installation and dependable electrical performance

Applications & Use Cases

The 7 Pin JST PH 2.0mm Vertical Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation systems
• Battery Management Systems (BMS)
• IoT devices
• Sensor and control modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible Header
• Number of Pins: 7
• Pitch: 2.0mm
• Mounting Type: Through-Hole (THT)
• Orientation: Vertical Straight (Top Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 7-pin Female Housing

Why Choose This Header?

The 7 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry is ideal for applications requiring multiple signal or power connections in a compact PCB layout. Its through-hole construction provides excellent mechanical stability, while the polarized design ensures secure and reliable mating. Suitable for drones, robotics, industrial electronics, and embedded systems, it delivers consistent performance and long-term durability.

Package Includes

• 1 × 7 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry Connector

Product Description

The 7 Pin JST PH 2.0mm Housing is a high-quality wire-to-board connector housing designed for secure and reliable electrical connections in compact electronic applications. Compatible with the JST PH 2.0mm series, this 7-pin housing is ideal for use in drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, and DIY electronics projects.

Designed to accommodate 7 crimp terminals (sold separately), the housing provides a secure, polarized connection that prevents incorrect mating and ensures stable electrical performance. Its compact design makes it suitable for high-density wiring applications where space is limited while maintaining excellent connection reliability.

Manufactured from high-quality PA66 (Nylon) thermoplastic, the housing offers excellent mechanical strength, electrical insulation, and resistance to heat and wear. The locking design securely mates with compatible JST PH 2.0mm 7-pin male headers, minimizing the risk of accidental disconnection caused by vibration or movement.

Whether you're assembling custom wire harnesses, repairing electronic devices, or building embedded systems, the 7 Pin JST PH 2.0mm Housing provides a durable and dependable connector solution.

Key Features

• JST PH 2.0mm compatible housing
• 7-pin wire-to-board connector
• 2.0mm pitch
• Polarized design prevents incorrect insertion
• Compatible with JST PH crimp terminals
• Secure locking mechanism for reliable connections
• High-strength PA66 (Nylon) insulating housing
• Compact design for space-constrained applications
• Easy terminal insertion and assembly
• Durable construction for long service life

Applications & Use Cases

The 7 Pin JST PH 2.0mm Housing is commonly used in:

• Drones and UAV electronics
• Battery Management Systems (BMS)
• Robotics and automation
• IoT devices
• Sensor modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial electronic equipment
• DIY electronics and custom cable assemblies

Technical Specifications

• Connector Type: JST PH Compatible Housing
• Number of Pins: 7
• Pitch: 2.0mm
• Housing Material: PA66 (Nylon)
• Color: White/Natural
• Mounting Style: Wire-to-board
• Terminal Type: Compatible with JST PH crimp terminals (sold separately)
• Compatible Header: JST PH 2.0mm 7-pin male header
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A (depending on terminals and wire gauge)
• Operating Temperature: -25°C to +85°C

Why Choose This Housing?

The 7 Pin JST PH 2.0mm Housing is an excellent choice for creating compact and reliable wire harnesses. Its polarized design ensures correct mating, while the durable nylon construction provides long-lasting mechanical strength and electrical insulation. Compatible with standard JST PH terminals and headers, it is ideal for drones, robotics, battery-powered devices, and a wide range of electronic projects.

Package Includes

• 1 × 7 Pin JST PH 2.0mm Housing

Product Description

The 7 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry is a high-quality PCB-mounted wire-to-board connector designed to provide secure and reliable electrical connections in compact electronic systems. Featuring a 2.0mm pitch, 7-pin configuration, and horizontal right-angle side-entry design, this connector is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, industrial control systems, and embedded electronics.

Compatible with the JST PH 2.0mm series, this header is designed for through-hole (THT) PCB mounting, providing excellent mechanical strength and long-term durability. The horizontal right-angle orientation allows cables to connect parallel to the PCB, making it ideal for applications requiring low-profile cable routing and compact enclosure designs.

The connector features high-quality copper alloy contacts with tin plating, ensuring low contact resistance, reliable electrical conductivity, and excellent corrosion resistance. Its high-temperature thermoplastic housing offers superior insulation and withstands soldering temperatures, making it suitable for both prototype development and mass production.

Whether you're designing a drone flight controller, building an embedded system, or assembling industrial electronic equipment, the 7 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry provides a compact, durable, and dependable wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible PCB header
• 7-pin wire-to-board connector
• 2.0mm pitch
• Through-hole (THT) PCB mounting
• Horizontal right-angle side-entry design
• Polarized connector prevents incorrect mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Strong mechanical retention after soldering
• Compact, low-profile design
• Reliable electrical performance and easy installation

Applications & Use Cases

The 7 Pin JST PH 2.0mm Right Angle Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation
• Battery Management Systems (BMS)
• IoT devices
• Sensor modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible Header
• Number of Pins: 7
• Pitch: 2.0mm
• Mounting Type: Through-Hole (THT)
• Orientation: Horizontal Right Angle (Side Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 7-pin Female Housing

Why Choose This Header?

The 7 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry is an excellent choice for compact PCB layouts requiring side-entry cable routing. Its through-hole construction provides superior mechanical stability, while the polarized design ensures secure and reliable mating. Ideal for drones, robotics, industrial electronics, and embedded systems, it delivers dependable performance and long service life.

Package Includes

• 1 × 7 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry Connector

The 7 pin JST PH 2.0mm SMT Header Horizontal Right Angle Side Entry is a precision connector designed for reliable signal and power transfer between PCBs and wires. Featuring a compact 2.0mm pitch and seven pins, this surface-mount horizontal header allows for secure connections in limited space applications. Its right angle side entry design optimizes board layout flexibility, making it ideal for compact electronics, consumer devices, and prototyping setups requiring quick disconnect options.

• Seven-pin configuration supports multiple signal or power lines in a single connector.
• The 2.0mm pitch ensures compatibility with standard JST PH series connectors for seamless integration.
• Surface-mount technology (SMT) design allows for automated PCB assembly and a durable solder joint.
• Right angle side entry optimizes space management on crowded circuit boards.
• Enables quick disconnects for easy maintenance and component swapping without extensive rework.
• Ideal for signal and power transfer in compact electronic assemblies and prototypes.
• Constructed for secure and reliable electrical connections in various industrial and consumer applications.

Product Description

The 6 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry is a high-quality PCB-mounted wire-to-board connector designed to provide secure and reliable electrical connections in compact electronic systems. Featuring a 2.0mm pitch, 6-pin configuration, and horizontal right-angle side-entry design, this connector is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, industrial control systems, and embedded electronics.

Compatible with the JST PH 2.0mm series, this header is designed for through-hole (THT) PCB mounting, providing excellent mechanical strength and long-term durability. The horizontal right-angle orientation allows cables to connect parallel to the PCB, making it ideal for applications requiring low-profile cable routing and compact enclosure designs.

The connector features high-quality copper alloy contacts with tin plating, ensuring low contact resistance, reliable electrical conductivity, and excellent corrosion resistance. Its high-temperature thermoplastic housing offers superior insulation and withstands soldering temperatures, making it suitable for both prototype development and mass production.

Whether you're designing a drone flight controller, building an embedded system, or assembling industrial electronic equipment, the 6 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry provides a compact, durable, and dependable wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible PCB header
• 6-pin wire-to-board connector
• 2.0mm pitch
• Through-hole (THT) PCB mounting
• Horizontal right-angle side-entry design
• Polarized connector prevents incorrect mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Strong mechanical retention after soldering
• Compact, low-profile design
• Reliable electrical performance and easy installation

Applications & Use Cases

The 6 Pin JST PH 2.0mm Right Angle Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation
• Battery Management Systems (BMS)
• IoT devices
• Sensor modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible Header
• Number of Pins: 6
• Pitch: 2.0mm
• Mounting Type: Through-Hole (THT)
• Orientation: Horizontal Right Angle (Side Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 6-pin Female Housing

Why Choose This Header?

The 6 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry is an excellent choice for compact PCB layouts requiring side-entry cable routing. Its through-hole construction provides superior mechanical stability, while the polarized design ensures secure and reliable mating. Ideal for drones, robotics, industrial electronics, and embedded systems, it delivers dependable performance and long service life.

Package Includes

• 1 × 6 Pin JST PH 2.0mm Through Hole Header Horizontal Right Angle Side Entry Connector

Product Description

The 6 Pin JST PH 2.0mm SMT Header Vertical Straight Top Entry is a compact and reliable surface-mount wire-to-board connector designed to provide secure electrical connections in space-constrained electronic applications. Featuring a 2.0mm pitch, 6-pin configuration, and vertical straight top-entry design, this connector is ideal for applications requiring multiple signal connections while maintaining an efficient PCB layout.

Compatible with the JST PH 2.0mm series, this header is designed for Surface Mount Technology (SMT) assembly, making it suitable for automated PCB manufacturing and high-density circuit board designs. The vertical top-entry orientation allows the mating connector to connect directly from above the PCB, enabling efficient cable routing and optimized component placement.

The connector features high-quality copper alloy contacts with tin plating, ensuring excellent electrical conductivity, low contact resistance, and reliable long-term performance. Its high-temperature thermoplastic housing provides excellent insulation and withstands standard SMT reflow soldering processes, ensuring durability in demanding electronic environments.

Ideal for drones, robotics, IoT devices, sensors, embedded systems, battery management systems, and consumer electronics, the 6 Pin JST PH 2.0mm SMT Header Vertical Straight Top Entry provides a dependable and space-efficient wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible SMT header
• 6-pin wire-to-board connector
• 2.0mm pitch
• Surface Mount Technology (SMT) design
• Vertical straight top-entry orientation
• Polarized connector design for secure mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Suitable for automated PCB assembly
• Compact and space-saving design
• Reliable electrical and mechanical performance

Applications & Use Cases

The 6 Pin JST PH 2.0mm SMT Vertical Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation systems
• Battery Management Systems (BMS)
• IoT devices
• Sensor modules
• Embedded control systems
• LED lighting systems
• Consumer electronics
• Arduino-compatible hardware
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible SMT Header
• Number of Pins: 6
• Pitch: 2.0mm
• Mounting Type: Surface Mount Technology (SMT)
• Orientation: Vertical Straight (Top Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 6-pin Female Housing

Why Choose This Header?

The 6 Pin JST PH 2.0mm SMT Header Vertical Straight Top Entry is an excellent choice for compact PCB designs requiring a reliable and space-efficient wire connection. Its SMT construction supports automated PCB assembly, while the vertical top-entry configuration enables neat cable placement and optimized board layouts. It is suitable for drones, robotics, embedded electronics, and other compact electronic systems.

Package Includes

• 1 × 6 Pin JST PH 2.0mm SMT Header Vertical Straight Top Entry Connector

This 6 pin JST PH 2.0mm SMT Header features a horizontal right-angle side entry design, making it ideal for efficient PCB to wire connections. It enables quick disconnects and signal or power transfer between circuit boards and wiring harnesses. Designed for surface mount technology (SMT), this connector ensures a compact footprint and reliable mechanical and electrical performance, suitable for various electronic assembly applications.

• Six-pin configuration supports multiple signal or power connections in a single compact unit.
• The 2.0mm pitch balances compact size with reliable contact spacing for effective current flow.
• Horizontal right-angle orientation facilitates space-saving board layouts and easier cable routing.
• Surface mount technology (SMT) compatibility ensures streamlined assembly on modern PCBs.
• Designed for quick and secure disconnects between boards and wires, enhancing serviceability.
• Robust construction delivers consistent signal and power transfer in demanding environments.
• Suitable for a wide range of electronic devices and prototypes requiring dependable connector solutions.

Product Description

The 6 Pin JST PH 2.0mm Housing is a high-quality wire-to-board connector housing designed for secure and reliable electrical connections in compact electronic applications. Compatible with the JST PH 2.0mm series, this 6-pin housing is ideal for use in drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, and DIY electronics projects.

Designed to accommodate 6 crimp terminals (sold separately), the housing provides a secure, polarized connection that prevents incorrect mating and ensures stable electrical performance. Its compact design makes it suitable for high-density wiring applications where space is limited while maintaining excellent connection reliability.

Manufactured from high-quality PA66 (Nylon) thermoplastic, the housing offers excellent mechanical strength, electrical insulation, and resistance to heat and wear. The locking design securely mates with compatible JST PH 2.0mm 6-pin male headers, minimizing the risk of accidental disconnection caused by vibration or movement.

Whether you're assembling custom wire harnesses, repairing electronic devices, or building embedded systems, the 6 Pin JST PH 2.0mm Housing provides a durable and dependable connector solution.

Key Features

• JST PH 2.0mm compatible housing
• 6-pin wire-to-board connector
• 2.0mm pitch
• Polarized design prevents incorrect insertion
• Compatible with JST PH crimp terminals
• Secure locking mechanism for reliable connections
• High-strength PA66 (Nylon) insulating housing
• Compact design for space-constrained applications
• Easy terminal insertion and assembly
• Durable construction for long service life

Applications & Use Cases

The 6 Pin JST PH 2.0mm Housing is commonly used in:

• Drones and UAV electronics
• Battery Management Systems (BMS)
• Robotics and automation
• IoT devices
• Sensor modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial electronic equipment
• DIY electronics and custom cable assemblies

Technical Specifications

• Connector Type: JST PH Compatible Housing
• Number of Pins: 6
• Pitch: 2.0mm
• Housing Material: PA66 (Nylon)
• Color: White/Natural
• Mounting Style: Wire-to-board
• Terminal Type: Compatible with JST PH crimp terminals (sold separately)
• Compatible Header: JST PH 2.0mm 6-pin male header
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A (depending on terminals and wire gauge)
• Operating Temperature: -25°C to +85°C

Why Choose This Housing?

The 6 Pin JST PH 2.0mm Housing is an excellent choice for creating compact and reliable wire harnesses. Its polarized design ensures correct mating, while the durable nylon construction provides long-lasting mechanical strength and electrical insulation. Compatible with standard JST PH terminals and headers, it is ideal for drones, robotics, battery-powered devices, and a wide range of electronic projects.

Package Includes

• 1 × 6 Pin JST PH 2.0mm Housing

This 6-pin JST PH connector features a 2mm pitch and a Teflon PTFE insulated wire measuring 15cm in length with a one-side female configuration. Designed for reliable PCB to wire connections, it enables quick disconnection or signal and power transfer between circuit boards and wiring harnesses. Its high-quality materials ensure durability and stable electrical performance in various electronic applications.

• 6-pin configuration with a precise 2mm pitch for compact and secure connections
• Teflon PTFE insulation offers excellent heat resistance and electrical insulation
• 15cm wire length provides flexibility for easy routing in tight spaces
• One side female connector simplifies integration with male headers or components
• Enables quick disconnect functionality for effortless maintenance and upgrades
• Suitable for signal and power transfer between PCBs and wiring assemblies
• Ideal for electronics assembly and prototyping, ensuring dependable connections

Product Description

The 6 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry is a high-quality PCB-mounted wire-to-board connector designed to provide secure and reliable electrical connections in compact electronic systems. Featuring a 2.0mm pitch, 6-pin configuration, and vertical straight top-entry design, this connector is ideal for drones, robotics, battery management systems (BMS), IoT devices, sensors, LED lighting, consumer electronics, industrial control systems, and embedded electronics.

Compatible with the JST PH 2.0mm series, this header is designed for through-hole (THT) PCB mounting, providing excellent mechanical strength and long-term durability. The vertical top-entry orientation allows cables to connect directly from above the PCB, making it suitable for applications requiring efficient cable management and vertical board-to-wire connections.

The connector features high-quality copper alloy contacts with tin plating, ensuring low contact resistance, reliable electrical conductivity, and excellent corrosion resistance. Its high-temperature thermoplastic housing offers superior insulation and withstands soldering temperatures, making it suitable for both prototype development and mass production.

Whether you're designing a multi-signal PCB, assembling a drone controller, or building industrial and embedded electronic systems, the 6 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry provides a compact, reliable, and durable wire-to-board connection solution.

Key Features

• JST PH 2.0mm compatible PCB header
• 6-pin wire-to-board connector
• 2.0mm pitch
• Through-hole (THT) PCB mounting
• Vertical straight top-entry design
• Polarized connector prevents incorrect mating
• Tin-plated copper alloy contacts
• High-temperature thermoplastic housing
• Strong mechanical retention after soldering
• Compact and reliable design
• Easy installation and dependable electrical performance

Applications & Use Cases

The 6 Pin JST PH 2.0mm Vertical Header is commonly used in:

• Drones and UAV electronics
• Robotics and automation systems
• Battery Management Systems (BMS)
• IoT devices
• Sensor and control modules
• LED lighting systems
• Consumer electronics
• Embedded systems
• Arduino and Raspberry Pi projects
• Industrial control equipment
• DIY electronics and PCB prototyping

Technical Specifications

• Connector Type: JST PH Compatible Header
• Number of Pins: 6
• Pitch: 2.0mm
• Mounting Type: Through-Hole (THT)
• Orientation: Vertical Straight (Top Entry)
• Contact Material: Copper Alloy
• Contact Plating: Tin Plated
• Housing Material: High-temperature Thermoplastic
• Rated Voltage: 100V AC/DC
• Rated Current: Up to 2A
• Operating Temperature: -25°C to +85°C
• Compatible Connector: JST PH 2.0mm 6-pin Female Housing

Why Choose This Header?

The 6 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry is ideal for applications requiring multiple signal or power connections in a compact PCB layout. Its through-hole construction provides excellent mechanical stability, while the polarized design ensures secure and reliable mating. Suitable for drones, robotics, industrial electronics, and embedded systems, it delivers consistent performance and long-term durability.

Package Includes

• 1 × 6 Pin JST PH 2.0mm Through Hole Header Vertical Straight Top Entry Connector