Visa

1Set 180 Magnet Motor Kit

₹ 560.17 ₹ 1,046.00

-46%

Low in stock

Amass XT60 XT30 Fuse Smoke Plug, Tester Circuit Breaker

₹ 625.00 ₹ 872.00

-28%

Low in stock

I-Flight Chimera5 Pro V2 Frame Kit

₹ 2,310.00 ₹ 7,000.00

-67%

Out of stock

FS90MG - 6V 2.2kg.cm 180deg Digital Micro Servo Motor

₹ 476.74 ₹ 797.00

-40%

Technical Specifications

Brand:

Feetech

Storage Temperature Range:

-30℃～80℃

Operating Temperature Range:

-15℃～70℃

Size:

22.5mm x 12.1mm x 26.7mm

Weight:

12.7± 1g

Gear Type:

Metal Gear

Limit Angle:

180 degree

Bearing:

No Ball Bearings

Horn Gear Spline:

21T

Horn Type:

Plastic, POM

Case:

ABS

Connector Wire:

250mm

Motor:

Metal brush motor

Operating Voltage Range:

4.8-6V

Idle Current (at Stopped):

5mA-6mA

No Load Speed:

0.07sec/60degr@6V

Running Current (at No Load):

220 mA @6V

Peak Stall Torque:

2.2kg.cm@6V

Rated Torque:

0.7kg.cm@6V

Stall Current:

800mA@6V

Running Degree:

180°(when 500～2500μsec)

Rotating Direction:

CW(when 1500～900 µsec) CCW(when 1500～2100 µsec)

Warranty Information

All the products supplied by Evelta are genuine and original. We offer 14 days replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

Description

Precision Control with Robust Performance: Enhance Your Projects with the FS90MG 6V 2.2kg.cm 180° Digital Servo Motor

The FS90MG 6V 2.2kg.cm 180° Digital Servo Motor is the perfect choice for projects requiring precise control and reliable performance. This digital servo motor is designed with copper gears for durability, providing a peak stall torque of 2.2kg.cm at 6V. Whether you're working on robotics, RC models, or other applications demanding accurate positioning, the FS90MG delivers consistent results. Its compact size, coupled with a wide operating voltage range, makes it versatile for various uses, ensuring your projects run smoothly under different conditions.

Key Features:

High Torque Output: Delivers a peak stall torque of 2.2kg.cm at 6V, providing powerful and reliable performance.
Durable Copper Gears: Ensures long-lasting durability and consistent operation, even in demanding conditions.
Precise 180° Rotation: Offers accurate 180° rotation for applications requiring precise control and positioning.
Wide Operating Voltage: Functions effectively within a 4.8V to 6V range, suitable for diverse projects.
Compact and Lightweight: Weighs just 12.7g with dimensions of 22.5mm x 12.1mm x 26.7mm, ideal for tight spaces and lightweight designs.
Digital Precision: Features a digital control system, ensuring precise and smooth operation with minimal error.

Low in stock

DF13 4-Pin Flight Controller Cable 20Cm for Multirotor Quadcopter

₹ 83.00 ₹ 112.00

-26%

Readytosky DF13 4-Pin Flight Controller Cable (20cm) – Precision Data Connectivity

Streamline your drone’s internal wiring with the Readytosky DF13 4-Pin Cable. Specifically engineered for high-reliability data transmission, this cable is the industry standard for connecting critical peripherals to APM and Pixhawk flight controllers. Whether you are wiring up a GPS module, an external compass, or a telemetry radio, the Hirose-style DF13 connector ensures a vibration-resistant, "locked-in" connection that won't vibrate loose during aggressive maneuvers.

At 20cm in length, this cable provides the perfect amount of reach for standard F450 or 250mm frames without creating unnecessary "spaghetti" wiring that can interfere with your flight controller's IMU or compass.

Key Highlights:

Genuine Hirose DF13 Series Interface: Features the low-profile, high-density connector used by professional-grade flight controllers for dependable sensor communication.
Flexible 20cm Length: Offers enough slack for clean routing around frame plates while remaining short enough to minimize signal interference.
4-Pin Data Configuration: Perfectly mapped for I2C (Compass) or Serial (Telemetry/GPS) data protocols commonly found in ArduPilot and PX4 ecosystems.
Vibration Resistant: Designed to maintain a secure electrical contact even in the high-frequency vibration environment of a multirotor.
Universal APM/Pixhawk Compatibility: A direct "plug-and-play" replacement or expansion cable for APM 2.6, 2.8, and early Pixhawk hardware.

Technical Specifications

Feature	Details
Brand	Readytosky
Connector Type	DF13 (4-Pin)
Series	Hirose DF13 Compatible
Cable Length	200mm (20cm)
Pitch	1.25mm
Compatibility	APM / Pixhawk / GPS / Telemetry
Application	Multirotors, Fixed-Wing, and DIY Robotics

Installation Pro-Tip:

DF13 connectors are designed for a very tight fit. When disconnecting, always use a small pair of tweezers or a fingernail to grip the plastic housing itself rather than pulling on the silicone wires to prevent pin damage.

Partsbaba Quality Commitment: All Readytosky cables are 100% genuine and original. We provide a 14-day replacement warranty against manufacturing defects, ensuring your mission-critical data links are secure

In stock

DF13 6-Pin Flight Controller Cable 20Cm for Multirotor Quadcopter

₹ 83.00 ₹ 112.00

-26%

Readytosky DF13 6-Pin Flight Controller Cable (20cm) – Mission-Critical Data Link

Ensure flawless communication between your flight controller and high-bandwidth peripherals with the Readytosky DF13 6-Pin Cable. This 20cm data lead is a staple for professional-grade DIY drone builds, specifically designed to meet the high-density connection standards of the APM 2.6/2.8 and Pixhawk ecosystems.

Featuring the industry-standard Hirose DF13 series interface, this cable provides a secure, vibration-resistant latching mechanism. It is most commonly used for high-priority connections like GPS with integrated compass units, Telemetry radios, and Power Modules, where losing a single pin connection could mean the difference between a successful RTH (Return to Home) and a flyaway.

Key Highlights:

Genuine Hirose-Style Interface: Utilizes the low-profile, 1.25mm pitch DF13 connector favored by ArduPilot and PX4 hardware for its reliability in high-vibration environments.
6-Pin Multi-Channel Support: The 6-wire configuration is perfectly mapped for combined GPS/Compass modules or full-feature Telemetry kits that require RX/TX, Power, Ground, and I2C lines.
Perfectly Proportioned: At 20cm (200mm), this cable is long enough to reach from a centrally mounted flight controller to an elevated GPS mast on most 450mm to 650mm frames.
High-Flex Silicone Wiring: The flexible internal wiring allows for tight routing through frame plates and around standoffs without putting undue stress on the flight controller's delicate vertical pins.
Universal APM/Pixhawk Support: A direct "plug-and-play" replacement for the standard 6-pin cables included with original 3DR and Readytosky sensor kits.

Technical Specifications

Feature	Details
Brand	Readytosky
Connector Type	DF13 (6-Pin)
Pitch	1.25mm
Length	20cm (200mm)
Compatibility	APM 2.5/2.6/2.8, Pixhawk, GPS, Power Modules
Application	Data, Power, and Signal Transmission

Pro-Builder Tip:

The 6-pin DF13 is most commonly used for the Power Module port. Because this cable carries the voltage and current sensing data that your flight controller uses to trigger failsafes, always ensure the connector is fully seated and the wires are free from any tension or sharp bends.

Partsbaba Quality Assurance: We only supply 100% genuine Readytosky components. Every cable is backed by our 14-day replacement warranty against manufacturing defects, ensuring your drone's internal "nervous system" is reliable from the very first power-up.

In stock

ESC Power Distribution Board, XT60 Plug & 3.5mm Banana Bullet Connectors Soldered

₹ 377.95 ₹ 675.00

-44%

Readytosky Pre-Soldered ESC Power Distribution Board (PDB) – Plug-and-Play Hub

Eliminate the hassle of complex soldering and messy wiring harnesses with the Readytosky Pre-Soldered ESC Power Distribution Board. Specifically designed for pilots who want a fast, reliable, and "tool-free" assembly experience, this PDB comes ready to use right out of the box. With high-quality connectors already professionally soldered, it serves as the centralized power hub for your quadcopter’s battery and speed controllers.

The board features a streamlined circular layout that fits perfectly in the center of most 250mm to 450mm frames, ensuring that power is distributed evenly to all four arms without the clutter of traditional wiring "octopuses."

Key Highlights:

Plug-and-Play Setup: Comes pre-fitted with an XT60 Male plug for your battery and 3.5mm Banana Bullet connectors for your ESCs, saving you hours of soldering and heat-shrinking.
Clean & Organized Layout: By centralizing your connections, this board significantly improves airflow through the frame and makes troubleshooting ESC issues much easier.
Universal Frame Support: The mounting and connector layout are optimized for a wide range of drones, including the F450, QAV250, and QAV280 series.
High-Current Copper Traces: Built on a thick PCB with high-conductivity copper to handle the heavy amp draws required during high-throttle maneuvers.
Rugged Construction: Professional-grade solder joints ensure vibration resistance, a critical factor for long-term reliability in multirotor flight.

Technical Specifications

Feature	Details
Brand	Readytosky
Input Connector	XT60 (Pre-soldered)
Output Connectors	3.5mm Gold Bullet Female (Pre-soldered)
Compatibility	250mm to 450mm Quadcopters
Design	Low-profile Circular PDB
Application	Power Distribution for 4 ESCs

Installation Note:

To ensure a secure fit, double-check that your ESCs are equipped with matching 3.5mm male bullet connectors. If your ESCs have bare wires, simply solder 3.5mm male bullets to them for a completely modular, "snap-together" power system.

Partsbaba Quality Assurance: Every Readytosky power board we supply is 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can build your next project with total peace of mind.

Low in stock

10pc 18cm 1.2mm Z-type Steel Wire Push Rod

₹ 83.00 ₹ 112.00

-26%

Low in stock

3.5mm Gold-plated Cross Male & Female Banana Connector

₹ 22.00 ₹ 32.00

-31%

In stock

FPV Drone Propeller 1070 Cinelifter Glass Fiber Nylon 3 Blade 5mm Shaft Pitch 7" Black (1 Pair CW+CCW)

₹ 773.42 ₹ 1,517.00

-49%

Gemfan 1070 3-Blade FPV Drone Propeller for Cinelifter & Heavy Lift Drone

The Gemfan 1070 3-Blade Propeller is designed for FPV drones, cinelifters, heavy-lift quadcopters, and professional aerial builds that require strong thrust, smooth control, and reliable flight stability. Built for demanding drone applications, this propeller is well suited for cinematic flying and payload-focused drone setups.

Made from glass fiber nylon, the Gemfan 1070 offers a strong combination of durability, rigidity, and lightweight performance. Its 3-blade design and 7-inch pitch help generate balanced lift and responsive control, making it ideal for drone operators who need both stability and efficient propulsion.

With a 254mm prop disk diameter, 5mm mount, and compatibility with 3214-800KV motors, this propeller is a practical choice for professional FPV builds, cinelifters, and custom heavy-duty drone applications where performance and control are critical.

Key Features

3-blade propeller design for smooth and stable flight performance
7-inch pitch for strong thrust and balanced control
Made from durable glass fiber nylon material
Suitable for cinelifter and heavy-lift drone applications
Designed for professional FPV and aerial cinematography setups
Compatible with 5mm shaft mount motors
Recommended for use with 3214-800KV motors
Ideal for stable flight, payload carrying, and cinematic drone builds

Technical Specifications

Brand	Gemfan
Prop Disk Diameter	254mm
Pitch	7in
Mount	5mm
Center Thickness	9.4mm
Color	Black
Material	Glass Fiber Nylon
Weight	23.3g
Recommended Motor	3214-800KV
No. of Blades	3

Warranty Information

All products supplied by PartsBaba are genuine and original. We offer a 14-day replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

Low in stock

FS-SM100 - USB Simulator Dongle Cable 1.5M Support FMS, VRC PRO

₹ 571.73 ₹ 1,122.00

-49%

The FlySky FS-SM100 Simulator Dongle Cable is a practical training accessory designed for RC enthusiasts, drone pilots, and hobbyists who want to improve their flying skills using a computer-based simulator. This USB simulator dongle allows you to connect your compatible FlySky RC transmitter to your computer and practice flying in a safe virtual environment.

Compatible with popular flight simulation software such as FMS and VRC PRO, the FS-SM100 helps beginners learn basic controls and allows experienced pilots to refine advanced maneuvers without risking damage to their real RC models. Whether you're training for airplanes, helicopters, drones, or RC flight systems, this simulator dongle is a useful tool for improving accuracy and confidence.

The dongle features a USB interface for easy setup and reliable connection, while the 1.5-meter cable length offers comfortable movement during simulation sessions. Lightweight, portable, and easy to use, the FlySky FS-SM100 is ideal for practicing anytime and anywhere.

Key Features

USB simulator dongle cable for RC flight training
Compatible with FlySky RC transmitters
Supports popular simulator software like:
- FMS
- VRC PRO
Helps improve RC piloting skills without risking real equipment
Easy plug-and-play USB connection
1.5-meter cable for flexible and comfortable use
Lightweight and portable design
Suitable for beginners and experienced RC pilots
Ideal for aircraft, helicopter, drone, and RC simulation practice
CE certified for safe and reliable use

Technical Specifications

Specification	Details
Brand	FlySky
Model	FS-SM100
Type	Simulator Dongle
Resolution	1024
Data Port	USB
Power Source	USB
Supported Software	FMS, VRC PRO
Cable Length	1.5 meters
Weight	28g
Color	Black
Certification	CE

Applications

Suitable for:

RC Flight Simulator Practice
Drone Pilot Training
RC Airplane Simulation
RC Helicopter Training
Beginner RC Learning
Advanced Flight Maneuver Practice

Package Includes

1 x Simulator Dongle USB Analog Cable
1 x Large Round Patch Cord
1 x Small Round Adapter Cable

Low in stock

F8041 Folding Drone Propeller 2 Blade Glass Fiber Nylon - Black (1 Pair CW+CCW)

₹ 403.79 ₹ 758.00

-47%

In stock

F8041 Folding Drone Propeller 3 Blade Glass Fiber Nylon - Black (1 Pair CW+CCW)

₹ 504.98 ₹ 947.00

-47%

Gemfan 8041F-3 Folding Propeller (8”) – 3-Blade Glass Fiber Nylon Drone Prop (CW+CCW Pair)

Upgrade your drone’s lifting power and stability with the Gemfan 8041F-3 Folding Propellers, designed for high-performance applications and larger drone builds. Featuring a 3-blade design, these 8-inch propellers deliver increased thrust, improved control, and enhanced stability—ideal for aerial photography, mapping, and heavy-lift drones.

Constructed from durable glass fiber reinforced nylon, these propellers offer excellent strength while maintaining efficient flight performance. The folding design ensures easy portability and convenient storage without compromising reliability.

Key Features:

3-Blade High Thrust Design: Provides superior lift and enhanced flight stability for demanding applications.
Folding Mechanism: Compact design for easy transport and quick deployment.
Durable Construction: Made from high-strength glass fiber nylon for long-lasting performance.
Optimized Aerodynamics: Ensures smooth airflow, reduced vibration, and stable flight.
Reliable Performance: Ideal for professional drones requiring consistent and controlled output.
Complete Pair: Includes both CW and CCW propellers for easy installation.
Sleek Black Finish: Clean and professional look for modern drone setups.

Technical Specifications:

Brand: Gemfan
Model: 8041F-3
Prop Diameter: 203.3 mm (8 inch)
Pitch: 4.1 inch
Blades: 3
Mount: 5 mm
Center Thickness: 7.25 mm
Max Prop Width: 23.2 mm
Material: Glass Fiber Nylon
Weight: 11.6g
Recommended Motor: 2812 1200KV
Color: Black
Package: 1 Pair (CW + CCW)

Warranty:
All products sold by PartsBaba are 100% genuine and original. We offer a 14-day replacement warranty in case of manufacturing defects. For more details, please visit our Cancellation & Returns page.

Get stronger lift, better control, and reliable performance with the Gemfan 8041F-3 Folding Propellers—built for powerful and stable drone flights.

In stock

XXD A2208 1100KV Brushless Motor

₹ 538.54 ₹ 963.00

-44%

In stock

15T Metal Servo Motor Horn Arm Red for ES08MA II

₹ 167.84 ₹ 299.00

-44%

Low in stock

Stack Saver Protective Tape for FPV Drones

₹ 141.68 ₹ 266.00

-47%

Gemfan Stack Saver / Protective Tape – (2.5 x 18cm)

Product Description

The Gemfan Stack Saver is a specialized protective accessory designed to safeguard the "heart" of your FPV drone—the electronics stack. In high-performance FPV flying, vibrations and physical impacts can lead to loose connections, damaged solder joints, or stack misalignment. This durable strap acts as a reinforcement layer, providing consistent compression to keep your Flight Controller (FC), ESC, and VTX firmly seated and protected from dust and debris.

Measuring 18cm in length, it is perfectly sized to wrap around standard 20x20mm and 30x30mm stacks. Whether you are building a rugged 5-inch freestyle quad or a compact Cinewhoop, the Gemfan Stack Saver adds a critical layer of defense, ensuring your electronics stay secure during aggressive maneuvers and inevitable hard landings.

Key Features

Secure Stack Reinforcement: Specifically designed to compress and hold together multi-level electronics stacks, preventing component shifting during high-G maneuvers.
Vibration Dampening: Helps absorb micro-vibrations that can affect gyro performance, leading to a smoother tune and more stable flight.
Protective Barrier: Functions as a dust cover and protective shield, keeping grass, dirt, and prop-wash debris away from sensitive PCB components.
High-Tenacity Material: Built from durable, anti-slip fabric that resists wear and tear even after repeated tightening and removal.
Solder Joint Protection: By minimizing the independent movement of stack layers, it significantly reduces mechanical stress on delicate wiring and solder points.
Universal Fit: The 2.5cm width and 18cm length make it a versatile fit for a wide variety of FPV frames and stack heights.

Technical Specifications

Brand: Gemfan
Product Name: Stack Saver / Protective Tape
Dimensions: 2.5 x 18 cm
Compatibility: 2-inch to 7-inch FPV Drones (20x20 & 30x30 Stacks)
Function: Compression, Dust Protection, and Vibration Reduction
Material: High-Strength Synthetic Fiber
Color: Black (Standard)

Package Includes

1 x Gemfan Stack Saver Strap (2.5 x 18 cm)

Warranty Information

All products supplied by Partsbaba are genuine and original. We offer a 14-day replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

In stock

31mm 1208 3 Blade Propeller 0.8mm Shaft Pitch 0.8" - Clear Red (4 Pair CW+CCW)

₹ 332.94 ₹ 624.00

-47%

In stock

31mm 1219 3 Blade Propeller 1mm Shaft Pitch 1.9" Clear Red (4 Pair CW+CCW)

₹ 332.94 ₹ 624.00

-47%

In stock

4Pcs Anti Vibration Rubber Balls Blue

₹ 74.00 ₹ 112.00

-34%

Readytosky Anti-Vibration Gimbal Dampeners (4-Piece Set) – Eliminate "Jello" Effect

Achieve professional-grade, cinematic stability with the Readytosky Anti-Vibration Rubber Dampeners. Specifically engineered for gimbal mounting plates on DJI Phantom series drones and custom FPV camera rigs, these high-elasticity silicone balls act as a mechanical low-pass filter. By absorbing high-frequency motor vibrations and frame resonance, they effectively eliminate the "jello effect" in your video, ensuring buttery-smooth footage even during aggressive flight maneuvers.

These dampeners are the ideal balance between "soft" for vibration absorption and "firm" for structural support, making them a must-have for any aerial photography or videography platform.

Key Highlights:

Advanced Vibration Isolation: Effectively decouples the camera gimbal from the drone frame, neutralizing the micro-shakes that cause distorted or wavy video.
Precision Silicone Build: Crafted from durable, high-grade silicone that maintains its elasticity in both extreme cold and high-heat environments.
High Load Capacity: Each ball is rated to support between 120g and 180g, allowing a 4-piece set to easily stabilize a standard gimbal and action camera setup.
Ultralight Profile: At just 1.5g per unit, these dampeners provide maximum stabilization without impacting your drone’s center of gravity or flight time.
Standard Fitment: Designed with a 7mm inner diameter to fit most standard gimbal mounting holes found on DJI Phantom 2, 3, and various 3D-printed or carbon fiber mounts.

Technical Specifications

Feature	Details
Brand	Readytosky
Quantity	4 Pieces
Material	High-Elasticity Silicone
Color	Vibrant Blue
Dimensions	21mm (H) x 17mm (W)
Inner Diameter	7mm
Weight	1.5g per ball
Load Rating	120g – 180g (per ball)

Installation Pro-Tip:

For maximum security, especially on larger camera rigs, we recommend threading a small, loose-fitting zip tie through the center of the dampening balls. This acts as a "safety tether" to prevent the gimbal from separating from the frame in the event of a hard landing or extreme impact.

Partsbaba Quality Assurance: We only supply 100% genuine and original Readytosky components. Your purchase is protected by our 14-day replacement warranty against manufacturing defects. For full details on returns, please visit our support page.

In stock

125 Watt Nickel Plated Soldering Iron Bit For 125W Soldering Iron

₹ 160.00 ₹ 225.00

-29%

In stock

52.75mm 2535 4 Blade RotorX Propeller 1.5mm Shaft Pitch 2.4" Clear Gray (4 Pair CW+CCW, 4 Pairs Bi-Blade or 2 Pairs 4-Blade)

₹ 231.74 ₹ 434.00

-47%

Gemfan RotorX 2535 Propeller for Precision FPV Performance

If your FPV drone feels unstable during sharp turns or lacks smooth control at high speeds, it can ruin your flight experience. The Gemfan RotorX 2535 propeller solves this problem because it delivers better grip, balance, and responsiveness, so you can fly with confidence in racing or freestyle sessions.

Why FPV Racing Propellers Improve Flight Control

The FPV racing propellers design enhances thrust and stability, so your drone reacts faster to every input. Because of the 4-blade configuration, you get tighter cornering and improved control, especially during aggressive maneuvers. Also, the optimized pitch ensures smoother airflow, which reduces vibrations and improves flight consistency.

Built for Speed, Strength, and Reliability

Made from durable polycarbonate (PC), this propeller handles crashes better while maintaining performance. It is lightweight, so it doesn’t overload your motors, while also ensuring efficient power delivery. Specifically designed for 1105–1108 motors, it balances durability and agility without compromising flight time.

Key Features and Benefits

4-Blade Design – Improves stability and control during sharp turns
2.4-Inch Pitch – Delivers a balance of speed and thrust for smooth flight
Lightweight (0.81g) – Enhances agility and increases flight efficiency
PC Material Build – Provides durability and impact resistance
1.5mm 3-Hole Mount – Ensures secure and wide motor compatibility

Technical Specifications

Specification	Details
MPN	GF-RX2535
Product Type	Drone Propeller
Category	FPV Drone Accessories

Compatibility

Supported Motors
1105 Brushless Motors
1106 Brushless Motors
1107 Brushless Motors
1108 Brushless Motors

Fly Better with FPV Racing Propellers

Upgrade your drone with the FPV racing propellers that deliver precision, stability, and durability. The Gemfan RotorX 2535 propeller is built for pilots who want smoother flights and better control, so you can push your drone to its limits with confidence.

In stock

7037 178.8mm 3 Blade Cinelifter Propeller 5mm Shaft Pitch 3.7" Clear Black (2 Pair CW+CCW)

₹ 373.42 ₹ 701.00

-47%

In stock

Drone Propeller D51 2020 4 Blade 50.3mm 1.5mm Shaft Pitch 2" Black (4 Pair CW+CCW)

₹ 332.94 ₹ 624.00

-47%

Gemfan D51 Cinewhoop Propellers for Smooth and Stable Flights

Struggling with shaky footage or unstable control during tight indoor flights? That often happens because standard props lack grip and precision. The Gemfan D51 cinewhoop propellers solve this by delivering smoother thrust and better control, so your drone performs reliably in cinematic and confined environments.

Why Cinewhoop Drone Propellers Improve Stability

The cinewhoop drone propellers design focuses on controlled thrust and steady airflow, which is essential for smooth footage. Because of the 4-blade configuration, you get enhanced stability and better handling during slow and precise movements. Also, the optimized pitch ensures consistent lift, so your drone maintains balance even in complex flight paths.

Built for Precision and Durability

Made from high-quality polycarbonate (PC), these propellers offer durability while staying lightweight. This means they can handle minor impacts without losing performance. Specifically designed for 1103–1105 motors, they provide efficient power transfer while maintaining flight efficiency and responsiveness.

Key Features and Benefits

4-Blade Design – Delivers stable and controlled flight for cinematic shots
2-Inch Pitch – Balances thrust and efficiency for smooth hovering
Lightweight (0.91g) – Improves agility and reduces motor strain
PC Material Build – Enhances durability and impact resistance
1.5mm Mount – Ensures secure and reliable motor fitment

Technical Specifications

Specification	Details
MPN	GF-D51
Product Type	Drone Propeller
Category	Cinewhoop Accessories

Compatibility

Supported Motors
1103 Brushless Motors
1104 Brushless Motors
1105 Brushless Motors

Upgrade Your Setup with Cinewhoop Drone Propellers

If you want smoother footage and better control, these cinewhoop drone propellers are a reliable upgrade. The Gemfan D51 cinewhoop propellers deliver stability, precision, and durability, so you can fly confidently in tight spaces and capture clean, professional shots.

In stock

GS-2502 Digital Micro Servo 2g With Plastic Gear For RC Aircraft Drones

₹ 589.00 ₹ 845.00

-30%

Low in stock

SUNFUN 2306 1900KV Brushless Motor CW/CCW For MultiCopter/QuadCopter Drone

₹ 1,081.75 ₹ 2,224.00

-51%

Technical Specifications

Brand:

DYS

Framework:

12N14P

No. of Cells:

2 - 6S

Length:

31mm

Shaft:

M5

KV:

1900KV

Diameter:

28.5mm

Propeller Suggested:

GF5040

Net Weight:

32.5g

Suggested ESC:

30A

Max Current:

26.5A

Max Pull:

1250g

Warranty Information

All the products supplied by Evelta are genuine and original. We offer 14 days replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

Description

SUNFUN SF2306 1900KV Brushless Motor for Multicopter / Quadcopter Drone

The SF2306 1900KV Brushless Motor is a high-performance, high-torque motor designed to deliver exceptional thrust and efficiency for multicopters, quadcopters and a wide range of RC aircraft. Engineered with a powerful 12N14P high-torque stator design, this motor provides smoother rotation, faster response and superior pulling power compared to standard brushless motors. Supporting 2–6S LiPo batteries, it offers impressive speed, stable operation and excellent flight flexibility—making it ideal for FPV drones, freestyle builds, long-range platforms and high-agility multirotors. With its high working efficiency and durable construction, the SF2306 1900KV ensures reliable performance in demanding aerial applications including planes, helicopters, UAVs and custom drone builds.

Key Features

1900KV High-Speed Output: Delivers strong acceleration and smooth responsiveness for FPV and performance drones.
12N14P High-Torque Design: Provides powerful thrust, stable rotation and superior efficiency.
2–6S LiPo Compatibility: Supports a wide voltage range for both high-speed and endurance flight setups.
High Working Efficiency: Reduced heat buildup and improved overall performance for longer, smoother flights.
Wide Application Use: Suitable for quadcopters, multicopters, RC aircraft, helicopters and UAV systems.
Durable Construction: Engineered for long-term reliability under high-load and high-speed conditions.

In stock

6042 153.07mm 2 Blade Flash Propeller 5mm Shaft Pitch 4.7" Black (2 Pair CW+CCW)

₹ 231.74 ₹ 434.00

-47%

Gemfan 6042 Flash PC (2-Blade) – High-Velocity FPV Racing Propellers

Push the boundaries of speed and precision with the Gemfan 6042 Flash series. These 2-blade propellers are meticulously engineered for pilots who prioritize top-end velocity and lightning-fast throttle response. By reducing drag and optimizing the airfoil for high-speed airflow, the 6042 Flash delivers a raw, aggressive performance profile perfect for open-track racing and long-range high-speed cruising.

Built from high-tenacity Polycarbonate (PC), these props are designed to maintain their shape under high RPM, ensuring stable flight even at full throttle. If you are looking to unlock the maximum speed potential of your 6-inch build, the Flash 6042 is your go-to choice.

Key Highlights:

High-Pitch Performance: Featuring a 4.7-inch pitch, these props provide massive "bite" in the air, resulting in higher top speeds and explosive punch-outs.
Efficiency-Focused 2-Blade Design: The twin-blade configuration minimizes surface area and drag, allowing your motors to reach higher RPMs with less battery drain compared to tri-blades.
Precision Matched for 2306 Motors: Specifically tuned to pair with 2306 series motors, providing the perfect balance of torque and aerodynamic loading.
Durable & Lightweight: At just 4.83g, these propellers minimize rotational inertia, giving you that sought-after "connected" feel during complex maneuvers.

Technical Specifications

Feature	Details
Brand	Gemfan
Prop Disk Diameter	153.07mm (6.02 inch)
Pitch	4.7 in
Blades	2
Material	Polycarbonate (PC)
Weight	4.83g
Mounting Hole	5mm
Center Thickness	7.5mm
Recommended Motor	2306
Color	Black

Partsbaba Quality Assurance: We guarantee that all products are 100% genuine and original. For your confidence, we provide a 14-day replacement warranty covering any manufacturing defects. Check our returns policy for more information.

In stock

Q250 4-Axis Quadcopter Frame

₹ 959.80 ₹ 1,794.00

-46%

Readytosky Q250 – Aerodynamic Ultralight FPV Quadcopter Frame

Push the limits of speed and agility with the Readytosky Q250. Engineered for pilots who demand a responsive and durable FPV platform, this 250mm wheelbase frame features a unique aerodynamic profile designed to cut through the air with minimal drag. At an ultralight weight of just 118g, the Q250 is built for rapid acceleration and precision maneuvering, making it an excellent choice for both racing and high-speed freestyle.

The frame utilizes high-strength Molded PA66 reinforced with Glass Fiber for the arms, ensuring that the structure is rigid enough for high-torque flight while remaining resilient enough to survive the occasional crash.

Key Highlights:

Innovative Angled Arm Design: The distinct upward-angled arms improve flight stability and agility by optimizing the thrust vector and reducing aerodynamic interference.
Ultralight Construction: Weighing only 118g, this frame minimizes rotational inertia, allowing your motors to respond instantly to flight controller inputs.
Tough Hybrid Materials: The use of PA66 and glass fiber provides a lighter alternative to traditional carbon fiber without sacrificing the durability needed for aggressive "violent" flight.
Integrated FPV Camera Mount: Features a dedicated mounting space for standard 28mm x 28mm cameras, ensuring your FPV feed is secure and perfectly positioned.
Versatile Power Support: The mounting patterns are designed to support a wide range of power plants, from efficient 1806 motors to high-power 2204 racing motors.

Technical Specifications

Feature	Details
Brand	Readytosky
Wheelbase	250mm
Frame Weight	118g (Ultralight)
Material	Molded PA66 + Glass Fiber
Camera Support	28mm x 28mm
Recommended Motors	1806 (Normal) / 2204 (High Performance)
Recommended ESC	12A
Recommended Propellers	5045 / 6045
Recommended Battery	3S 1300mAh - 1500mAh LiPo

Build Potential

The Q250's "subversive" through-machine design simplifies the building process, offering a clean layout for your flight controller and power distribution. Whether you're building a budget-friendly trainer or a high-speed racing machine, this frame provides the customization flexibility you need.

Partsbaba Quality Assurance: We only supply 100% genuine Readytosky products. For your peace of mind, we offer a 14-day replacement warranty against manufacturing defects.

In stock

2312 920KV CW Brushless Motor for F450 F550 S500 SK500

₹ 768.08 ₹ 1,437.00

-47%

Readytosky 2312 920KV Brushless Motor – High-Efficiency Power for DJI & F450 Builds

Upgrade your multirotor with the Readytosky 2312 920KV, a premium brushless motor engineered for stability, endurance, and smooth cinematic flight. Designed as a high-performance replacement for the DJI Phantom series and popular F450/F550/S500 frames, this motor combines precision Japanese engineering with a high-torque outrunner design.

The 920KV rating is the "sweet spot" for 9-inch and 10-inch propellers, providing the perfect balance of lift and battery efficiency. Whether you are building a GPS-stabilized photography drone or a reliable utility quadcopter, the 2312 series delivers the "locked-in" feel required for professional-grade aerial platforms.

Key Highlights:

Premium Internal Components: Features EZO Japanese bearings for ultra-smooth rotation and 0.2mm silicon steel sheets to minimize eddy current loss and heat.
Integrated Cooling & Stability: The innovative impeller seat design improves airflow, while the integral motor shaft ensures your propellers remain perfectly centered, reducing vibrations.
High Power-to-Weight Ratio: Despite weighing only 48g, this motor can handle a maximum continuous power of 220 Watts, giving you plenty of overhead for gimbals and cameras.
Broad Voltage Range: Optimized for 2S to 4S LiPo setups, allowing you to choose between lightweight 3S efficiency or high-thrust 4S performance.
Self-Locking Prop Ready: Fully compatible with standard DJI-style 9443, 9450, and 1045 self-locking propellers for quick, tool-free installation.

Technical Specifications

Feature	Details
Brand	Readytosky
KV Rating	920KV
Dimensions	27.7mm (Dia) x 26mm (Length)
Weight	48g
Max Continuous Current	14A
Max Continuous Power	220W
Motor Resistance (Rm)	0.117 Ohms
No-Load Current	0.45A @ 10V
Battery Compatibility	2S - 4S LiPo
Recommended Props	9443, 9450, 1045 (Self-locking)

Ideal Applications:

DJI Phantom Series: An excellent drop-in replacement for Phantom 1, 2, and 3 motors.
F450 / F550 / S500 Frames: The standard choice for 450-class hobbyist and educational builds.
Aerial Photography: Low vibration and high efficiency make it perfect for stable video platforms.

Partsbaba Quality Assurance: We only supply 100% genuine Readytosky components. Your purchase is protected by our 14-day replacement warranty against manufacturing defects. For full details on our returns policy, please visit our support page.

In stock

Readytosky Power Module With Yellow XT60 Plug Connector

₹ 501.11 ₹ 894.00

-44%

Readytosky APM/Pixhawk Power Module – Precision Voltage & Current Sensing

Give your flight controller a clean, reliable "heartbeat" with the Readytosky Power Module. Specially designed for the APM 2.6, 2.8, and Pixhawk series, this module serves a dual purpose: it acts as a high-efficiency switching regulator to power your electronics and a high-precision sensor to monitor your battery’s health in real-time.

By integrating a 5.3V switching regulator and a 90A current sensor into a single XT60-equipped unit, this module eliminates the need for messy external BECs and voltage dividers. It allows your flight controller to trigger "Low Battery" failsafes and monitor live mAh consumption, ensuring you never push your LiPo packs too far.

Key Highlights:

Dual-Function Design: Simultaneously regulates power to your flight controller while sending precise voltage and current data to your OSD or telemetry link.
High-Voltage Support: Safely handles up to 28V (6S LiPo), making it compatible with everything from small 3S trainers to heavy-lift 6S endurance rigs.
Plug-and-Play for ArduPilot: Features a standard 6-pin DF13 cable that plugs directly into the "PM" port of your APM or Pixhawk—no soldering or custom mapping required.
Robust 3A Output: The switching regulator provides a stable 5.3V at up to 3A, offering plenty of overhead to power your FC, GPS, and low-power telemetry modules.
Factory Protected: The unit comes pre-wrapped in high-quality transparent shrink tubing to prevent accidental shorts against carbon fiber frames.

Technical Specifications

Feature	Details
Brand	Readytosky
Max Input Voltage	28V (Up to 6S LiPo)
Max Current Sensing	90A
Voltage/Current Output	Configured for 5V ADC
Switching Regulator	5.3V @ 3A Max
Connectors	XT60 (Male/Female)
Cable Interface	6-pos DF13

Installation Note:

The Power Module is designed only to power the flight controller, a receiver, and low-power accessories (GPS, Telemetry). It is not intended to power servos. If your aircraft uses servos, please use a separate BEC or ESC to power the output rail of your flight controller.

Partsbaba Quality Commitment: All Readytosky power modules are 100% genuine. We offer a 14-day replacement warranty against manufacturing defects, so you can fly with the confidence that your power system is rock solid.

In stock

4Pcs M3 Shockproof Sponge Pad Black

₹ 68.00 ₹ 102.00

-33%

Readytosky M3 Shockproof Landing Pads (4-Piece Set) – High-Density Vibration Isolation

Give your racing drone a softer touch with the Readytosky M3 Shockproof Sponge Pads. These ultralight, high-density landing pads are the perfect alternative to heavy plastic or metal landing gear. Specifically designed for mini quads ranging from 180mm to 300mm, they provide a critical "crumple zone" that absorbs the kinetic energy of hard landings, protecting your carbon fiber frame and sensitive internal electronics from stress fractures.

Beyond landing protection, these pads feature a genuine 3M adhesive backing, making them dual-purpose: they can also be used as vibration-dampening mounts for flight controllers and gyros to ensure ultra-stable flight telemetry.

Key Highlights:

Superior Impact Absorption: Engineered to dampen the shock of fast, aggressive landings, significantly extending the life of your motor bolts and arm tips.
Ultralight Performance: Designed for FPV racing and freestyle, these pads add virtually zero weight, ensuring your quad remains agile and responsive.
Industrial-Grade 3M Adhesive: The pre-applied 3M backing provides a permanent, vibration-resistant bond to carbon fiber, plastic, or aluminum surfaces.
Anti-Static & Protective: The specialized sponge material helps prevent static buildup and keeps your frame slightly elevated off damp or dusty surfaces.
Universal Mini-Quad Fit: A perfect fit for the ZMR250, QAV210, QAV-R 220, and FPV racing frames. Simply peel and stick to the underside of your motor mounts.

Technical Specifications

Feature	Details
Brand	Readytosky
Quantity	4 Pieces
Material	High-Density Shockproof Sponge
Adhesive	Genuine 3M Heavy-Duty Tape
Compatibility	180mm – 300mm Frames (ZMR, QAV, etc.)
Application	Landing Gear / Gyro Mounting / Vibration Isolation

Installation Pro-Tip:

Before applying, clean the bottom of your drone's carbon fiber arms with a little isopropyl alcohol. This ensures the 3M adhesive creates a maximum-strength bond that won't peel off during high-speed slides or grass landings.

Partsbaba Quality Assurance: We only supply 100% genuine Readytosky accessories. Your purchase is protected by our 14-day replacement warranty against manufacturing defects. For full details on our returns policy, please visit our support page.

Low in stock

Main menu

Drone Components

Description

Main menu

Drone Components

Explore Related Collections

Description