Visa

Readytosky Power Module With Yellow XT60 Plug Connector

₹ 561.00

Readytosky APM/Pixhawk Power Module – Precision Voltage & Current Sensing

Give your flight controller a clean, reliable "heartbeat" with the Readytosky Power Module. Specially designed for the APM 2.6, 2.8, and Pixhawk series, this module serves a dual purpose: it acts as a high-efficiency switching regulator to power your electronics and a high-precision sensor to monitor your battery’s health in real-time.

By integrating a 5.3V switching regulator and a 90A current sensor into a single XT60-equipped unit, this module eliminates the need for messy external BECs and voltage dividers. It allows your flight controller to trigger "Low Battery" failsafes and monitor live mAh consumption, ensuring you never push your LiPo packs too far.

Key Highlights:

Dual-Function Design: Simultaneously regulates power to your flight controller while sending precise voltage and current data to your OSD or telemetry link.
High-Voltage Support: Safely handles up to 28V (6S LiPo), making it compatible with everything from small 3S trainers to heavy-lift 6S endurance rigs.
Plug-and-Play for ArduPilot: Features a standard 6-pin DF13 cable that plugs directly into the "PM" port of your APM or Pixhawk—no soldering or custom mapping required.
Robust 3A Output: The switching regulator provides a stable 5.3V at up to 3A, offering plenty of overhead to power your FC, GPS, and low-power telemetry modules.
Factory Protected: The unit comes pre-wrapped in high-quality transparent shrink tubing to prevent accidental shorts against carbon fiber frames.

Technical Specifications

Feature	Details
Brand	Readytosky
Max Input Voltage	28V (Up to 6S LiPo)
Max Current Sensing	90A
Voltage/Current Output	Configured for 5V ADC
Switching Regulator	5.3V @ 3A Max
Connectors	XT60 (Male/Female)
Cable Interface	6-pos DF13

Installation Note:

The Power Module is designed only to power the flight controller, a receiver, and low-power accessories (GPS, Telemetry). It is not intended to power servos. If your aircraft uses servos, please use a separate BEC or ESC to power the output rail of your flight controller.

Partsbaba Quality Commitment: All Readytosky power modules are 100% genuine. We offer a 14-day replacement warranty against manufacturing defects, so you can fly with the confidence that your power system is rock solid.

Only 2 items left

DF13 6-Pin Flight Controller Cable 20Cm for Multirotor Quadcopter

From ₹ 120.85

Readytosky DF13 6-Pin Flight Controller Cable (20cm) – Mission-Critical Data Link

Ensure flawless communication between your flight controller and high-bandwidth peripherals with the Readytosky DF13 6-Pin Cable. This 20cm data lead is a staple for professional-grade DIY drone builds, specifically designed to meet the high-density connection standards of the APM 2.6/2.8 and Pixhawk ecosystems.

Featuring the industry-standard Hirose DF13 series interface, this cable provides a secure, vibration-resistant latching mechanism. It is most commonly used for high-priority connections like GPS with integrated compass units, Telemetry radios, and Power Modules, where losing a single pin connection could mean the difference between a successful RTH (Return to Home) and a flyaway.

Key Highlights:

Genuine Hirose-Style Interface: Utilizes the low-profile, 1.25mm pitch DF13 connector favored by ArduPilot and PX4 hardware for its reliability in high-vibration environments.
6-Pin Multi-Channel Support: The 6-wire configuration is perfectly mapped for combined GPS/Compass modules or full-feature Telemetry kits that require RX/TX, Power, Ground, and I2C lines.
Perfectly Proportioned: At 20cm (200mm), this cable is long enough to reach from a centrally mounted flight controller to an elevated GPS mast on most 450mm to 650mm frames.
High-Flex Silicone Wiring: The flexible internal wiring allows for tight routing through frame plates and around standoffs without putting undue stress on the flight controller's delicate vertical pins.
Universal APM/Pixhawk Support: A direct "plug-and-play" replacement for the standard 6-pin cables included with original 3DR and Readytosky sensor kits.

Technical Specifications

Feature	Details
Brand	Readytosky
Connector Type	DF13 (6-Pin)
Pitch	1.25mm
Length	20cm (200mm)
Compatibility	APM 2.5/2.6/2.8, Pixhawk, GPS, Power Modules
Application	Data, Power, and Signal Transmission

Pro-Builder Tip:

The 6-pin DF13 is most commonly used for the Power Module port. Because this cable carries the voltage and current sensing data that your flight controller uses to trigger failsafes, always ensure the connector is fully seated and the wires are free from any tension or sharp bends.

Partsbaba Quality Assurance: We only supply 100% genuine Readytosky components. Every cable is backed by our 14-day replacement warranty against manufacturing defects, ensuring your drone's internal "nervous system" is reliable from the very first power-up.

Only 10 items left

Amass XT-30U Male & Female Connector

From ₹ 143.95

Only 13 items left

Amass XT60 Smoke Stopper Plug, Tester Circuit Breaker

₹ 494.00

Technical Overview

Feature	Details
Brand	ReadytoSky
Industry Standards	High-grade materials and precision CNC machining
Compatibility	Optimized for FPV racers, cinematic drones, and DIY UAVs
Build Quality	Focused on durability, weight reduction, and thermal efficiency

Partsbaba Warranty & Quality Assurance

100% Genuine Products: At Partsbaba, we guarantee that all ReadytoSky components are authentic, original, and sourced directly from verified manufacturer channels.
14-Day Replacement: To ensure your build is a success, we offer a 14-day replacement warranty specifically covering manufacturing defects.

Amass XT60 Smoke Stopper: The Ultimate First-Power-Up Safety Tool

The Amass XT60 Smoke Stopper is an essential "insurance policy" for every drone builder and RC enthusiast. Designed to be plugged in between your battery and your model during the very first power-up, this device acts as a resettable smart fuse. It instantly detects short circuits or wiring errors—such as a stray solder ball or reversed polarity—and cuts the power before your expensive ESCs, flight controllers, or motors are permanently damaged.

Equipped with high-precision PPTC (Polymeric Positive Temperature Coefficient) technology, this smoke stopper doesn't just "pop" and die; it trips to save your gear and then resets once the fault is cleared, making it a reusable and indispensable part of your workbench toolkit.

Key Features & Benefits

Intelligent Short-Circuit Prevention: Features high-speed PPTC resettable fuses that trip the moment an overcurrent or short is detected, preventing the "magic smoke" from leaving your electronics.
Reverse Polarity Protection: Provides a critical safety buffer if a battery is accidentally connected incorrectly, shielding your sensitive components from catastrophic voltage spikes.
Real-Time Visual Feedback: Includes a clear LED indicator system that provides immediate visual confirmation of your circuit’s health before you commit to a full-power flight.
Plug-and-Play Simplicity: Designed with genuine Amass XT60 connectors for a secure, low-resistance connection. Simply inline it between your LiPo and your model for instant protection.
Reusable & Reliable: Unlike traditional one-time fuses, this solid-state solution resets automatically once the electrical fault is removed, allowing for continuous troubleshooting.
Universal RC Compatibility: The gold standard for FPV quads, fixed-wing aircraft, RC cars, and boats. It is the perfect diagnostic tool for any 2S–6S power system.

Ideal Applications

Initial Bench Testing: Safely configure Betaflight or BLHeli settings without the risk of a hardware short.
Post-Repair Verification: Ensure that new solder joints or replaced components are correctly installed before flight.
DIY Electronics & Robotics: A versatile safety interface for any project utilizing XT60 power standards.

Package Includes

1x Authentic Amass XT60 Smoke Stopper Circuit Protector

Out of stock

AMASS XT90 Female DC Power Connector Socket 2-Pin THT PCB Mount 40A 500V - XT90 PW -F.G.Y

From ₹ 147.24

Only 134 items left

Amass XT30U Male Bullet Connector - XT30U-M.G.Y

From ₹ 45.00

Only 117 items left

Amass MT60 Male Connector - MT60 - M.G.Y

From ₹ 79.00

Only 117 items left

Amass GC4010-F 3mm Banana Plug Female

From ₹ 39.00

Only 5 items left

Jiyi Flow Meter and Flow Meter Sensor - Agriculture Drones Components

₹ 3,331.00

JIYI Flow Meter Sensor for Agriculture Drone Spraying Systems

The JIYI Flow Meter Sensor is a precision liquid flow sensor designed for agricultural drone spraying applications. It accurately measures the flow rate of liquids passing through the spraying system and sends real-time pulse signals to the flight controller. This enables precise control over pesticide, fertilizer, herbicide, and nutrient application, helping improve spraying efficiency while minimizing chemical wastage.

Compatible with JIYI flight controllers, including the K++ series, this flow meter is ideal for modern agriculture drones that require reliable and consistent liquid flow monitoring.

Key Features

Accurate Flow Measurement – Measures liquid flow precisely to ensure uniform spraying across the field.
Real-Time Data Output – Continuously transmits flow information to the flight controller for automatic spray regulation.
Wide Operating Range – Suitable for various agricultural liquids such as water, pesticides, herbicides, fertilizers, and micronutrients.
Compact & Lightweight – Designed specifically for UAV spraying systems without adding unnecessary payload.
Easy Installation – Integrates seamlessly with JIYI spraying systems and compatible agricultural drone controllers.
Reliable Performance – Stable pulse output ensures consistent operation during long spraying missions.
Durable Construction – Built to withstand demanding agricultural environments, including dust, moisture, and varying weather conditions.

Technical Specifications

Specification	Details
Water Pressure Resistance	0.35 MPa
Working Medium	Water (Continuous use up to 60°C)
Flow Range	0.2–6 L/min
Operating Voltage	DC 4.5–18V
Maximum Current	10mA
High-Level Output	≥4.5V (at 5V input)
Low-Level Output	≤0.5V (at 5V input)
Duty Cycle	50% ±10%
Pulse Output	F = 25 × Q ±10%
Insulation Resistance	>100 MΩ
Dielectric Strength	AC 500V, 50Hz
High Temperature Performance	±5% accuracy after 72 hours at 80°C
Low Temperature Performance	±5% accuracy after 72 hours at -20°C
Wiring	Red: VCC (+), Black: GND (-), Yellow: Signal

Benefits

Ensures consistent and accurate chemical application.
Helps reduce chemical wastage by maintaining the correct flow rate.
Supports efficient precision agriculture operations.
Provides stable pulse output for reliable communication with the flight controller.
Suitable for continuous field operations with minimal maintenance requirements.
Designed for dependable performance in harsh agricultural environments.

Applications

The JIYI Flow Meter Sensor is suitable for a variety of liquid dispensing applications, including:

Agricultural spraying drones
Fertilizer and pesticide application systems
Herbicide and fungicide spraying
Water distribution UAVs
Precision farming equipment
Research and testing platforms for liquid delivery systems

Package Includes

1 × JIYI Flow Meter Sensor

Safety & Installation Guidelines

Calibrate the flow meter before operation for optimal performance.
Operate only within the specified voltage, pressure, and temperature limits.
Ensure the wiring is connected correctly:
- Red: Positive (+)
- Black: Ground (-)
- Yellow: Signal
Flush the sensor with clean water after use to prevent residue buildup.
This product is intended for agricultural and industrial liquid flow monitoring applications.

Why Choose the JIYI Flow Meter Sensor?

The JIYI Flow Meter Sensor is an essential component for agricultural drone spraying systems, delivering accurate liquid flow monitoring and stable signal output for precise spray control. Its compact design, durable construction, and compatibility with JIYI flight controllers make it an excellent choice for improving spraying accuracy, reducing chemical waste, and enhancing overall operational efficiency in precision agriculture.

Out of stock

Amass XT30UD Female Connector - XT30UD-F.G.Y Drone Connectors

From ₹ 54.00

Product Description

The Amass XT30UD Female Connector (XT30UD-F.G.Y) is a high-quality, compact, and reliable power connector designed for efficient high-current electrical connections in drones, RC systems, robotics, and advanced electronic applications. Manufactured by Amass, a globally trusted leader in connector technology, this XT30UD series connector is engineered to deliver stable power transmission, low resistance, and long-term durability in demanding environments.

This XT30UD female connector features precision-machined gold-plated brass bullet contacts housed in a high-temperature resistant nylon shell. The gold plating ensures superior electrical conductivity, reduced contact resistance, and excellent anti-corrosion performance, making it ideal for repeated use in high-performance electronic systems.

Designed specifically for compact high-current, low-voltage applications, the XT30UD-F.G.Y provides a secure friction-fit connection that ensures minimal power loss and efficient energy transfer. Its optimized internal structure reduces heat buildup during operation, enhancing safety and overall system efficiency.

The connector is widely used in vibration-heavy environments such as drones and RC vehicles, where stable connectivity is essential. Its lightweight and compact design makes it an excellent choice for modern UAV builds, racing drones, and space-constrained electronic assemblies.

The XT30UD series design is preferred by engineers and hobbyists for its perfect balance of size, performance, and durability. It supports multiple plug-unplug cycles without performance degradation, making it ideal for both prototyping and long-term deployment.

Whether used in drone power systems or embedded electronics, the XT30UD female connector ensures consistent, safe, and efficient electrical connectivity.

Key Features

Genuine Amass XT30UD Female Connector (XT30UD-F.G.Y)
Compact high-current connector for drones and RC applications
Gold-plated brass bullet contacts for excellent conductivity
High-temperature nylon housing for durability and heat resistance
Low resistance design for efficient power transfer
Secure friction-fit connection with strong retention
Lightweight and space-saving construction
Vibration and shock resistant for UAV environments
High durability with long mating cycle life
Easy solder-type wire termination for installation

Applications & Use Cases

The Amass XT30UD Female Connector is widely used in various electronic and power systems, including:

FPV drones and UAV power distribution systems
RC cars, boats, trucks, and aircraft
Lithium Polymer (LiPo) battery connections
ESC (Electronic Speed Controller) wiring
Brushless motor power supply systems
Robotics and automation projects
DIY electronics and prototyping circuits
Battery packs and portable power systems
3D printers and CNC machines
IoT and embedded electronic devices
High-performance drone racing setups
Smart embedded power modules

Technical Specifications

Brand: Amass
Model: XT30UD-F.G.Y
Connector Type: Female
Series: XT30UD
Contact Material: Gold-plated brass
Housing Material: High-temperature nylon
Current Rating: High-current low-voltage applications (XT30 class)
Contact Resistance: Ultra-low resistance
Mounting Type: Solder wire connection
Application Type: Power connector for electronic systems
Operating Environment: Vibration-resistant and thermally stable

Why Choose This Connector?

The Amass XT30UD Female Connector is engineered for users who require a compact, reliable, and high-efficiency power connection solution. Its robust design ensures consistent electrical performance even under high load and vibration conditions, making it ideal for drones and RC systems.

Compared to larger connector types, the XT30UD series offers an optimal balance of size, safety, and electrical efficiency, making it a preferred choice among engineers, drone builders, and electronics manufacturers.

Package Includes

1 × Amass XT30UD Female Connector (XT30UD-F.G.Y)

In stock

Amass XT30UPB30 Male Connector (XT30UPB-M30.G.Y) Drone Connectors

From ₹ 52.00

Product Description

The Amass XT30UPB30 Male Connector (XT30UPB-M30.G.Y) is a premium-grade, high-current PCB-mount power connector designed for compact and efficient electrical connections in drones, RC systems, robotics, and advanced electronic applications. Manufactured by Amass, a globally trusted brand in connector technology, this XT30UPB series connector is engineered for superior power delivery, low resistance, and long-lasting durability in demanding environments.

This XT30UPB male connector features precision-machined gold-plated brass bullet contacts combined with a reinforced high-temperature nylon housing for maximum strength and electrical efficiency. The gold plating ensures excellent conductivity, corrosion resistance, and reduced contact resistance, making it ideal for high-performance electronic systems that require stable and reliable power transfer.

The XT30UPB30 design is a PCB-mount (through-hole) variant, allowing direct integration onto printed circuit boards. This eliminates the need for additional wiring in some applications, making PCB layouts cleaner, more compact, and more efficient. It is especially useful in drone power distribution boards, ESCs, and embedded power systems where space optimization is critical.

Engineered for high-current, low-voltage applications, the XT30UPB-M30.G.Y ensures minimal voltage drop and reduced heat generation during operation. Its secure friction-fit design provides strong mechanical retention, preventing accidental disconnection even in high-vibration environments such as UAVs and RC vehicles.

The connector is widely used in modern electronics where performance, compact size, and reliability are essential. Whether in professional drone builds or DIY electronics projects, it delivers consistent and safe electrical performance.

Key Features

Genuine Amass XT30UPB30 Male Connector (XT30UPB-M30.G.Y)
PCB-mount (through-hole) high-current connector design
Compact XT30 series for drones and RC applications
Gold-plated brass contacts for superior conductivity
High-temperature nylon housing for durability and insulation
Low resistance design for efficient power transfer
Secure friction-fit connection with strong retention
Optimized for vibration-heavy UAV environments
Space-saving PCB integration design
Long service life with high mating cycle durability
Easy solder-based PCB installation

Applications & Use Cases

The Amass XT30UPB30 Male Connector is widely used in various electronics and power systems, including:

FPV drones and UAV power distribution boards (PDBs)
RC cars, boats, trucks, and aircraft
Electronic Speed Controllers (ESCs)
Lithium Polymer (LiPo) battery power systems
Brushless motor power connections
Robotics and automation systems
3D printers and CNC machine electronics
Embedded PCB power supply circuits
DIY electronics and prototyping projects
IoT devices and smart embedded systems
Drone racing and high-performance UAV builds
Industrial control and compact power modules

Technical Specifications

Brand: Amass
Model: XT30UPB-M30.G.Y
Connector Type: Male
Series: XT30UPB30
Mounting Type: Through Hole (PCB Mount)
Contact Material: Gold-plated brass
Housing Material: High-temperature nylon
Current Rating: High-current low-voltage applications (XT30 class)
Contact Resistance: Ultra-low resistance
Application Type: PCB-mounted power connector
Operating Environment: High vibration and thermal stability

Why Choose This Connector?

The Amass XT30UPB30 Male Connector is designed for engineers and builders who require a compact, PCB-integrated, and high-efficiency power connector solution. Its through-hole mounting structure simplifies PCB design while ensuring strong mechanical stability and reliable electrical performance.

Compared to traditional wire-based connectors, the XT30UPB series provides a cleaner, more professional, and space-efficient solution, making it ideal for modern drone and embedded system designs.

Package Includes

1 × Amass XT30UPB30 Male Connector (XT30UPB-M30.G.Y)

In stock

Amass 8mm Gold Plated Bullet Connector Female-1Pcs- GC8010-F.G

From ₹ 197.65

Product Description

The Amass 8mm Gold Plated Bullet Connector Female (GC8010-F.G) is a high-performance, heavy-duty electrical connector designed for ultra-high current applications in drones, RC vehicles, robotics, and industrial electronic systems. Manufactured by Amass, a globally recognized leader in premium connector solutions, this 8mm bullet connector is engineered to deliver maximum power transfer efficiency, low resistance, and exceptional durability under extreme electrical loads.

This female 8mm bullet connector features precision-machined gold-plated copper alloy contacts, ensuring superior conductivity, minimal energy loss, and excellent corrosion resistance. The gold plating enhances long-term stability, making it suitable for repeated high-current connections in demanding environments where consistent performance is critical.

Designed for very high-current power transmission, the GC8010-F.G connector is widely used in large RC systems, industrial motor controllers, and high-power battery setups. Its robust structure ensures secure mating with compatible 8mm male bullet connectors, providing a tight friction-fit connection that minimizes the risk of accidental disconnection during operation.

The connector is housed in a durable, high-temperature-resistant insulation sleeve that provides excellent protection against heat, vibration, and mechanical stress. This makes it ideal for applications where electrical reliability and safety are essential, especially in high-power electric propulsion systems.

Engineered for professional-grade performance, the Amass 8mm bullet connector is a preferred choice for engineers and hobbyists working with high-voltage, high-current systems that require stable and efficient power delivery.

Key Features

Genuine Amass GC8010-F.G 8mm Female Bullet Connector
Gold-plated copper alloy contacts for superior conductivity
Designed for ultra-high current applications
Heavy-duty friction-fit connection for secure mating
High-temperature resistant insulation housing
Low resistance design for maximum power efficiency
Excellent vibration and heat resistance
Durable construction for long service life
Compatible with 8mm male bullet connectors
Ideal for professional RC and industrial applications

Applications & Use Cases

The Amass 8mm Gold Plated Bullet Connector Female is widely used in high-power electronic systems, including:

High-performance RC cars, trucks, and boats
Large FPV drones and industrial UAV systems
High-current lithium battery packs (LiPo/Li-ion setups)
Electronic Speed Controllers (ESCs) for large motors
Brushless motor power connections
Industrial motor drives and controllers
Robotics and automation systems
Electric propulsion systems
DIY high-power electronics projects
CNC machines and heavy-duty equipment
Power distribution systems in advanced electronics

Technical Specifications

Brand: Amass
Model: GC8010-F.G
Connector Type: Female Bullet Connector
Size: 8mm
Contact Material: Gold-plated copper alloy
Housing Material: High-temperature insulation sleeve
Current Rating: Ultra-high current applications
Contact Resistance: Very low resistance design
Mounting Type: Solder wire connection
Application Type: High-power electrical connector
Operating Environment: High vibration and thermal resistance

Why Choose This Connector?

The Amass 8mm Gold Plated Bullet Connector Female is designed for users who require maximum current handling, reliability, and durability in demanding power systems. Its robust construction ensures safe and efficient energy transfer even under extreme load conditions.

Compared to smaller connectors, the 8mm bullet series provides significantly higher current capacity, making it the preferred choice for large-scale RC builds, industrial systems, and high-power electronic applications where performance and safety cannot be compromised.

Package Includes

1 × Amass 8mm Gold Plated Bullet Connector Female (GC8010-F.G)

In stock

Amass XT30UPB30 Female Connector - XT30UPB-F30.G.Y Drone Connectors

From ₹ 50.00

Product Description

The Amass XT30UPB30 Female Connector (XT30UPB-F30.G.Y) is a high-quality PCB-mount power connector designed for compact, efficient, and reliable high-current electrical connections in drones, RC systems, robotics, and advanced embedded electronics. Manufactured by Amass, a globally trusted brand in professional connector technology, this XT30UPB series connector is engineered to deliver stable power transmission, low resistance, and long-lasting durability in demanding environments.

This XT30UPB female connector features precision-engineered gold-plated brass contacts housed in a high-temperature resistant nylon body. The gold plating ensures excellent electrical conductivity, corrosion resistance, and reduced contact resistance, enabling efficient power delivery even under continuous high-load conditions.

The XT30UPB30 variant is a PCB through-hole mount connector, allowing direct integration onto printed circuit boards. This design eliminates extra wiring in many applications, resulting in cleaner PCB layouts, improved space utilization, and better overall system efficiency. It is especially suitable for drone power distribution boards, ESCs, and compact embedded power systems.

Designed for high-current, low-voltage applications, the XT30UPB-F30.G.Y ensures minimal voltage drop and efficient energy transfer. Its secure friction-fit design provides strong mechanical retention, preventing accidental disconnections even in high-vibration environments such as UAVs, racing drones, and RC vehicles.

The connector is widely used by engineers, hobbyists, and manufacturers who require a compact yet powerful connector solution for modern electronics. Its balance of size, durability, and performance makes it ideal for both prototyping and production-grade applications.

Key Features

Genuine Amass XT30UPB30 Female Connector (XT30UPB-F30.G.Y)
PCB-mount (through-hole) high-current connector design
Compact XT30 series optimized for drones and RC systems
Gold-plated brass contacts for superior conductivity
High-temperature nylon housing for strength and insulation
Low resistance design for efficient power transfer
Secure friction-fit connection with strong retention
Space-saving PCB integration for clean circuit design
Vibration and shock resistant for UAV applications
Long service life with high mating cycle durability
Easy solder-based PCB installation

Applications & Use Cases

The Amass XT30UPB30 Female Connector is widely used in various electronic and power systems, including:

FPV drones and UAV power distribution boards (PDBs)
RC cars, boats, trucks, and aircraft
Electronic Speed Controllers (ESCs)
Lithium Polymer (LiPo) battery systems
Brushless motor power connections
Robotics and automation systems
3D printers and CNC machines
Embedded PCB power supply circuits
DIY electronics and prototyping projects
IoT and smart embedded devices
Drone racing and high-performance UAV builds
Industrial control and compact power modules

Technical Specifications

Brand: Amass
Model: XT30UPB-F30.G.Y
Connector Type: Female
Series: XT30UPB30
Mounting Type: Through Hole (PCB Mount)
Contact Material: Gold-plated brass
Housing Material: High-temperature nylon
Current Rating: High-current low-voltage applications (XT30 class)
Contact Resistance: Ultra-low resistance
Application Type: PCB-mounted power connector
Operating Environment: High vibration and thermal stability

Why Choose This Connector?

The Amass XT30UPB30 Female Connector is designed for engineers and builders who need a compact, reliable, and PCB-integrated high-current power solution. Its through-hole design simplifies PCB layouts while ensuring strong mechanical stability and consistent electrical performance.

Compared to traditional wire-based connectors, the XT30UPB series offers a cleaner, more efficient, and professional-grade solution for modern electronic systems, especially in drone and embedded applications.

Package Includes

1 × Amass XT30UPB30 Female Connector (XT30UPB-F30.G.Y)

In stock

Amass XT30PW30 Male Connector - XT30PW-M30.G.Y Original Drone Connectors

From ₹ 72.00

Product Description

The Amass XT30PW30 Male Connector (XT30PW-M30.G.Y) is a high-quality, compact PCB-mount power connector designed for reliable high-current electrical connections in drones, RC systems, robotics, and advanced embedded electronics. Manufactured by Amass, a globally trusted leader in professional connector solutions, this XT30PW series connector is engineered to deliver stable power transmission, low resistance, and long-lasting durability in compact and high-performance applications.

This XT30PW male connector features precision-machined gold-plated brass contacts enclosed in a high-temperature resistant nylon housing. The gold plating ensures excellent conductivity, reduced contact resistance, and strong anti-corrosion performance, enabling consistent electrical efficiency even under continuous high-load conditions.

The XT30PW30 design is a PCB through-hole mount connector, allowing direct integration onto printed circuit boards. This eliminates the need for additional wiring in many applications, resulting in cleaner PCB layouts, improved space utilization, and enhanced mechanical stability. It is especially suitable for drone power distribution boards, ESCs, embedded power systems, and compact electronic devices.

Designed for high-current, low-voltage applications, the XT30PW-M30.G.Y ensures efficient energy transfer with minimal voltage drop and heat generation. Its secure friction-fit mating system provides strong retention, reducing the risk of accidental disconnection in vibration-heavy environments such as UAVs, racing drones, and RC vehicles.

Engineered for modern electronics, this connector offers an ideal balance of compact size, high performance, and durability, making it a preferred choice for engineers, hobbyists, and manufacturers working on advanced power systems.

Key Features

Genuine Amass XT30PW30 Male Connector (XT30PW-M30.G.Y)
PCB-mount (through-hole) power connector design
Compact XT30 series for drones and RC applications
Gold-plated brass contacts for superior conductivity
High-temperature nylon housing for strength and insulation
Low resistance design for efficient power transfer
Secure friction-fit connection with strong mechanical retention
Space-saving PCB integration for clean circuit design
High vibration and shock resistance for UAV use
Long service life with high mating cycle durability
Easy solder-based PCB mounting

Applications & Use Cases

The Amass XT30PW30 Male Connector is widely used in various electronic and power systems, including:

FPV drones and UAV power distribution boards (PDBs)
RC cars, boats, trucks, and aircraft
Electronic Speed Controllers (ESCs)
Lithium Polymer (LiPo) battery systems
Brushless motor power connections
Robotics and automation systems
3D printers and CNC machines
Embedded PCB power supply circuits
DIY electronics and prototyping projects
IoT devices and smart embedded systems
Drone racing and high-performance UAV builds
Industrial control and compact power modules

Technical Specifications

Brand: Amass
Model: XT30PW-M30.G.Y
Connector Type: Male
Series: XT30PW30
Mounting Type: Through Hole (PCB Mount)
Contact Material: Gold-plated brass
Housing Material: High-temperature nylon
Current Rating: High-current low-voltage applications (XT30 class)
Contact Resistance: Ultra-low resistance
Application Type: PCB-mounted power connector
Operating Environment: High vibration and thermal stability

Why Choose This Connector?

The Amass XT30PW30 Male Connector is designed for engineers who require a compact, reliable, and PCB-integrated high-current power solution. Its through-hole structure ensures strong mechanical stability, while its gold-plated contacts guarantee consistent and efficient electrical performance.

Compared to traditional wired connectors, the XT30PW series provides a cleaner, more compact, and professional-grade solution, making it ideal for modern drone systems and embedded electronics where space and reliability are critical.

Package Includes

1 × Amass XT30PW30 Male Connector (XT30PW-M30.G.Y)

In stock

Amass 8mm Gold Plated Bullet Connector Male-1Pcs -GC8010-M.G

From ₹ 197.65

Product Description

The Amass 8mm Gold Plated Bullet Connector Male (GC8010-M.G) is a high-performance, heavy-duty electrical connector designed for ultra-high current applications in drones, RC systems, robotics, and industrial power electronics. Manufactured by Amass, a globally recognized leader in premium connector solutions, this 8mm bullet connector is engineered to deliver maximum power transfer efficiency, exceptional durability, and long-lasting electrical stability under extreme load conditions.

This male 8mm bullet connector features precision-machined gold-plated copper alloy contacts, ensuring superior conductivity, minimal resistance, and excellent corrosion resistance. The gold plating enhances long-term reliability by preventing oxidation and maintaining consistent electrical performance even after repeated mating cycles and exposure to high-current environments.

Designed specifically for very high-current power transmission, the GC8010-M.G connector is widely used in large RC vehicles, industrial controllers, and high-power battery systems. Its robust structure ensures a tight and secure friction-fit connection with compatible 8mm female bullet connectors, minimizing the risk of accidental disconnection during operation, even under high vibration or mechanical stress.

The connector is housed in a durable, heat-resistant insulation sleeve that provides excellent protection against thermal stress, physical impact, and electrical insulation breakdown. This makes it highly suitable for demanding applications where safety, efficiency, and reliability are critical.

Engineered for professional-grade use, the Amass 8mm bullet connector is ideal for systems requiring stable high-current flow, including electric propulsion systems, heavy-duty motors, and advanced power distribution setups.

Whether used in industrial robotics or high-performance RC builds, this connector ensures consistent power delivery with minimal energy loss, making it a trusted choice among engineers and hobbyists alike.

Key Features

Genuine Amass GC8010-M.G 8mm Male Bullet Connector
Gold-plated copper alloy contacts for superior conductivity
Designed for ultra-high current power applications
Strong friction-fit connection for secure mating
High-temperature resistant insulation housing
Low resistance design for efficient energy transfer
Excellent vibration and shock resistance
Durable construction for long service life
Compatible with 8mm female bullet connectors
Ideal for professional RC, drone, and industrial systems

Applications & Use Cases

The Amass 8mm Gold Plated Bullet Connector Male is widely used in high-power and demanding electronic systems, including:

High-performance RC cars, trucks, and boats
Large FPV drones and UAV propulsion systems
High-current lithium battery packs (LiPo/Li-ion)
Electronic Speed Controllers (ESCs) for large motors
Brushless motor power connections
Industrial motor control systems
Robotics and automation equipment
Electric propulsion and power systems
CNC machines and heavy-duty electronics
DIY high-power electronic projects
Advanced power distribution systems

Technical Specifications

Brand: Amass
Model: GC8010-M.G
Connector Type: Male Bullet Connector
Size: 8mm
Contact Material: Gold-plated copper alloy
Housing Material: High-temperature insulation sleeve
Current Rating: Ultra-high current applications
Contact Resistance: Very low resistance design
Mounting Type: Solder wire connection
Application Type: High-power electrical connector
Operating Environment: High vibration and thermal stability

Why Choose This Connector?

The Amass 8mm Gold Plated Bullet Connector Male is engineered for users who require maximum current handling, durability, and electrical efficiency. Its robust design ensures safe and stable performance even under extreme electrical loads and harsh operating conditions.

Compared to smaller connector types, the 8mm bullet series offers significantly higher current capacity, making it the preferred choice for large-scale RC builds, industrial systems, and high-power electronics where reliability is critical.

Package Includes

1 × Amass 8mm Gold Plated Bullet Connector Male (GC8010-M.G)

In stock

Amass Polymax 5.5mm Bullet Female connector - GC5510-F.G

From ₹ 55.00

Product Description

The Amass Polymax 5.5mm Bullet Female Connector (GC5510-F.G) is a high-performance, precision-engineered power connector designed for secure high-current electrical connections in RC systems, drones, robotics, and advanced electronic applications. Manufactured by Amass, a globally trusted leader in professional-grade connector solutions, this 5.5mm bullet connector delivers excellent conductivity, durability, and stable power transmission in demanding environments.

This female bullet connector features a high-quality gold-plated brass contact system, ensuring superior electrical conductivity and minimal resistance during high-load operation. The gold plating significantly improves corrosion resistance, allowing the connector to maintain stable performance over long-term usage and multiple mating cycles.

Designed for high-current power applications, the GC5510-F.G is widely used in battery packs, ESC connections, and motor power systems where consistent energy transfer is essential. Its precision-machined 5.5mm interface ensures a tight and secure friction-fit connection with compatible male connectors, reducing the risk of disconnection even in high-vibration environments such as drones and RC vehicles.

The connector is housed in a durable, heat-resistant insulation body that provides excellent protection against mechanical stress, heat buildup, and electrical insulation failure. This makes it highly suitable for demanding applications where safety and reliability are critical.

Engineers and hobbyists prefer the Amass Polymax 5.5mm series due to its balance of compact size and high current-handling capability. It is especially popular in high-power RC setups where efficient energy transfer and low voltage drop are required.

Key Features

Genuine Amass GC5510-F.G 5.5mm Female Bullet Connector
Gold-plated brass contacts for superior conductivity
Designed for high-current power transmission
Precision 5.5mm fit for secure male mating
Low resistance design for efficient energy flow
High-temperature resistant insulation housing
Strong vibration and shock resistance
Durable construction for long service life
Stable performance under continuous load
Easy solder-type wire termination

Applications & Use Cases

The Amass Polymax 5.5mm Bullet Female Connector is widely used in various electronic and power systems, including:

FPV drones and UAV power systems
RC cars, trucks, boats, and aircraft
Lithium polymer (LiPo) battery connections
Electronic Speed Controllers (ESCs)
Brushless motor power wiring
Robotics and automation systems
DIY electronics and prototyping projects
Battery pack assembly and maintenance
3D printers and CNC machine power systems
High-current power distribution setups
Industrial and embedded electronic systems

Technical Specifications

Brand: Amass
Series: Polymax / GC5510 Series
Model: GC5510-F.G
Connector Type: Female Bullet Connector
Size: 5.5mm
Contact Material: Gold-plated brass
Housing Material: High-temperature insulation
Current Rating: High-current applications (50A class typical)
Contact Resistance: Very low resistance (~0.25 mΩ typical)
Mounting Type: Solder wire connection
Application Type: High-power electrical connector
Operating Environment: Vibration and thermal resistant design

Why Choose This Connector?

The Amass Polymax 5.5mm Female Bullet Connector is designed for users who need a reliable, efficient, and high-current power connection solution. Its gold-plated contacts ensure long-term conductivity, while its precision fit guarantees stable electrical contact even under mechanical stress.

Compared to smaller connectors, the 5.5mm series offers significantly higher current capacity, making it ideal for medium-to-high power RC and drone applications where performance and safety are critical.

Package Includes

1 × Amass Polymax 5.5mm Bullet Female Connector (GC5510-F.G)

Only 117 items left

Amass Polymax 5.5mm Bullet Male connector - GC5510-M.G Original Drone Connectors

From ₹ 55.00

Product Description

The Amass Polymax 5.5mm Bullet Male Connector (GC5510-M.G) is a high-quality, precision-engineered power connector designed for reliable high-current electrical connections in drones, RC systems, robotics, battery packs, and advanced electronic applications. Manufactured by Amass, a globally trusted leader in professional-grade connector technology, this connector is built to deliver stable performance, low resistance, and long-lasting durability in demanding environments.

This male bullet connector features a robust gold-plated brass contact structure, ensuring excellent electrical conductivity, reduced voltage drop, and superior corrosion resistance. The gold plating enhances long-term reliability by preventing oxidation and maintaining consistent performance even after repeated mating cycles and heavy current usage.

Designed for high-current power transmission, the GC5510-M.G is widely used in applications such as LiPo battery connections, ESC wiring, and motor power systems. Its precision 5.5mm diameter ensures a tight and secure friction-fit connection with compatible female connectors, minimizing the risk of disconnection during vibration-heavy operations like drone flights or RC racing.

The connector is housed in a durable, heat-resistant insulation sleeve that protects against thermal stress, mechanical impact, and electrical short circuits. This makes it suitable for high-performance environments where safety and stability are critical.

Engineers and hobbyists prefer the Amass Polymax 5.5mm series due to its excellent balance of compact size, high current capability, and mechanical strength. It is especially popular in RC and drone power systems where efficient energy transfer and reliability are essential.

Key Features

Genuine Amass GC5510-M.G 5.5mm Male Bullet Connector
Gold-plated brass contacts for superior conductivity
Designed for high-current power applications
Precision 5.5mm fit for secure female mating
Low resistance for efficient energy transfer
High-temperature resistant insulation housing
Strong vibration and shock resistance
Durable construction for long service life
Stable performance under continuous load
Easy solder-type wire termination

Applications & Use Cases

The Amass Polymax 5.5mm Male Bullet Connector is widely used in various electronic and power systems, including:

FPV drones and UAV power systems
RC cars, trucks, boats, and aircraft
Lithium Polymer (LiPo) battery connections
Electronic Speed Controllers (ESCs)
Brushless motor wiring systems
Robotics and automation projects
DIY electronics and prototyping
Battery pack assembly and maintenance
3D printers and CNC machines
High-current power distribution systems
Industrial embedded electronic systems

Technical Specifications

Brand: Amass
Series: Polymax / GC5510 Series
Model: GC5510-M.G
Connector Type: Male Bullet Connector
Size: 5.5mm
Contact Material: Gold-plated brass
Housing Material: High-temperature insulation sleeve
Current Rating: High-current applications (50A class typical, up to burst higher)
Contact Resistance: Very low (~0.25 mΩ typical)
Mounting Type: Solder wire connection
Application Type: High-power electrical connector
Operating Environment: Vibration and thermal resistant design

Why Choose This Connector?

The Amass Polymax 5.5mm Male Bullet Connector is designed for users who need a reliable, efficient, and high-current power connection solution. Its gold-plated contacts ensure long-term conductivity, while its precision-fit design guarantees stable electrical contact even in high-vibration environments.

Compared to smaller connectors, the 5.5mm bullet series offers significantly higher current handling capability, making it ideal for medium-to-high power RC and drone applications where performance and safety are critical.

Package Includes

1 × Amass Polymax 5.5mm Bullet Male Connector (GC5510-M.G)

Only 117 items left

Amass XT30PW30 Female Connector -XT30PW-F30.G.Y Original Drone Connector

From ₹ 54.00

Product Description

The Amass XT30PW30 Female Connector (XT30PW-F30.G.Y) is a compact, high-performance PCB-mount power connector designed for secure and efficient high-current electrical connections in drones, RC systems, robotics, and advanced embedded electronics. Manufactured by Amass, a globally trusted leader in connector technology, this XT30PW series connector is engineered to deliver stable power transmission, low resistance, and long-lasting durability in compact electronic systems.

This XT30PW female connector features precision-machined gold-plated brass contacts housed in a high-temperature resistant nylon body. The gold plating ensures excellent electrical conductivity, reduced contact resistance, and strong anti-corrosion properties, making it suitable for repeated use in demanding environments where reliability is critical.

The XT30PW30 design is a PCB through-hole mount connector that allows direct integration onto printed circuit boards. This eliminates the need for additional wiring in many applications, resulting in cleaner PCB layouts, improved space efficiency, and stronger mechanical stability. It is especially suitable for drone power distribution boards (PDBs), ESCs, and compact embedded power systems where design optimization is essential.

Engineered for high-current, low-voltage applications, the XT30PW-F30.G.Y ensures efficient energy transfer with minimal voltage drop and heat generation. Its secure friction-fit connection provides strong retention, reducing the risk of accidental disconnection even in high-vibration environments such as UAVs, racing drones, and RC vehicles.

The connector is widely used by engineers and hobbyists for its excellent balance of compact size, durability, and electrical performance. It supports reliable power delivery in both prototyping and production-grade electronic systems, making it a preferred choice in modern drone and embedded electronics design.

Key Features

Genuine Amass XT30PW30 Female Connector (XT30PW-F30.G.Y)
PCB-mount (through-hole) high-current connector design
Compact XT30 series optimized for drones and RC applications
Gold-plated brass contacts for superior conductivity
High-temperature nylon housing for strength and insulation
Low resistance design for efficient power transfer
Secure friction-fit connection with strong retention
Space-saving PCB integration for clean circuit design
High vibration and shock resistance for UAV environments
Long service life with high mating cycle durability
Easy solder-based PCB installation

Applications & Use Cases

The Amass XT30PW30 Female Connector is widely used in various electronic and power systems, including:

FPV drones and UAV power distribution boards (PDBs)
RC cars, boats, trucks, and aircraft
Electronic Speed Controllers (ESCs)
Lithium Polymer (LiPo) battery systems
Brushless motor power connections
Robotics and automation systems
3D printers and CNC machines
Embedded PCB power supply circuits
DIY electronics and prototyping projects
IoT and smart embedded devices
Drone racing and high-performance UAV builds
Industrial control and compact power modules

Technical Specifications

Brand: Amass
Model: XT30PW-F30.G.Y
Connector Type: Female
Series: XT30PW30
Mounting Type: Through Hole (PCB Mount)
Contact Material: Gold-plated brass
Housing Material: High-temperature nylon
Current Rating: High-current low-voltage applications (XT30 class ~15–20A range depending on conditions)
Voltage Rating: Up to 500V DC
Contact Resistance: Low resistance design (typically sub-milliohm range)
Operating Temperature: -20°C to 120°C
Flammability Rating: UL94-V0 material grade
Application Type: PCB-mounted power connector
Mechanical Life: High mating cycle durability (~1000 cycles class)

Why Choose This Connector?

The Amass XT30PW30 Female Connector is designed for engineers who need a compact, reliable, and PCB-integrated power connection solution. Its through-hole mounting structure ensures strong mechanical stability, while its gold-plated contacts guarantee consistent electrical performance over long-term use.

Compared to traditional wire-based connectors, the XT30PW series offers a cleaner, more efficient, and professional-grade solution for modern electronics, especially in drone systems where weight, space, and reliability are critical.

Package Includes

1 × Amass XT30PW30 Female Connector (XT30PW-F30.G.Y)

Only 117 items left

Amass XT30(2+2) Female Connector - XT30(2+2)-F.G.B Drone Connectors

From ₹ 90.00

Product Description

The Amass XT30(2+2) Female Connector (XT30(2+2)-F.G.B) is a compact, high-performance hybrid power and signal connector designed for reliable electrical connections in drones, RC systems, robotics, and advanced electronic applications. Manufactured by Amass, a globally trusted leader in professional connector technology, this connector is engineered to deliver stable power transmission, secure signal handling, and long-term durability in compact electronic systems.

This XT30(2+2) female connector combines standard XT30 high-current power terminals with additional signal pins in a single integrated housing. The “2+2” configuration typically includes two main power contacts (positive and negative) along with two auxiliary signal pins, making it ideal for applications requiring both power delivery and communication or sensing in one connector system.

The connector features precision-machined gold-plated brass contacts, ensuring excellent electrical conductivity, low resistance, and strong corrosion resistance. This ensures stable performance even under continuous load conditions and repeated mating cycles, which is essential in demanding drone and RC environments.

Designed for high-current, low-voltage applications, the XT30(2+2)-F.G.B provides efficient energy transfer with minimal voltage drop and heat generation. Its secure locking and friction-fit design ensure stable connection even under vibration, shock, and movement, making it highly reliable for UAVs, racing drones, and robotics systems.

The housing is made from high-temperature flame-retardant thermoplastic (UL94-V0 rated), offering excellent insulation, thermal stability, and mechanical strength. Its compact integrated structure reduces wiring complexity, making PCB layouts and system integration cleaner and more efficient.

This connector is widely used by engineers and manufacturers who require both power + signal integration in a single compact connector, improving system reliability and reducing assembly complexity.

Key Features

Genuine Amass XT30(2+2) Female Connector (XT30(2+2)-F.G.B)
Integrated power + signal connector design
Gold-plated brass contacts for high conductivity
Compact XT30 form factor with extended signal capability
High-temperature UL94-V0 flame-retardant housing
Low resistance design for efficient power transfer
Secure friction-fit connection for vibration resistance
Combines power delivery and auxiliary signal lines
High durability with long mating cycle life
Easy solder-type wire termination

Applications & Use Cases

The Amass XT30(2+2) Female Connector is widely used in advanced electronic and power systems, including:

FPV drones and UAV power + telemetry systems
RC cars, boats, trucks, and aircraft
Lithium polymer (LiPo) battery systems with signal monitoring
Electronic Speed Controllers (ESCs) with telemetry support
Brushless motor and sensor-integrated systems
Robotics and automation systems
Smart battery packs with communication lines
DIY electronics and advanced prototyping
3D printers and CNC machines with sensor feedback systems
IoT and embedded electronics requiring power + data integration
Industrial control and smart power modules

Technical Specifications

Brand: Amass
Model: XT30(2+2)-F.G.B
Connector Type: Female
Series: XT30 (2+2)
Configuration: 2 Power + 2 Signal Pins
Contact Material: Gold-plated brass
Housing Material: High-temperature thermoplastic (UL94-V0)
Current Rating: Up to 20A class for power pins (typical XT30 range)
Voltage Rating: Up to 500V DC
Operating Temperature: -20°C to 120°C
Contact Resistance: ≤1.2 mΩ
Mechanical Life: ~100 mating cycles
Application Type: Power + signal PCB/wire connector
Mounting Type: Solder wire connection

Why Choose This Connector?

The XT30(2+2) Female Connector is ideal for advanced drone and embedded systems where both power delivery and signal communication are required in a compact footprint. Its integrated design reduces wiring complexity, improves reliability, and enhances system efficiency.

Compared to standard XT30 connectors, the 2+2 variant offers additional functionality without significantly increasing size, making it a preferred choice for modern UAVs and smart electronic systems.

Package Includes

1 × Amass XT30(2+2) Female Connector (XT30(2+2)-F.G.B)

In stock

Amass XT30PB(2+2) Male Connector - XT30(2+2)PB-M.G.B

From ₹ 112.45

Product Description

The Amass XT30PB(2+2) Male Connector (XT30(2+2)PB-M.G.B) is a high-performance PCB-mount hybrid power connector designed for compact, reliable, and efficient electrical connections in drones, RC systems, robotics, and advanced embedded electronic applications. Manufactured by Amass, a globally trusted brand in professional connector solutions, this XT30PB series connector is engineered to deliver stable power transmission, low resistance, and integrated signal capability in modern electronic systems.

This XT30(2+2) male connector features a unique 2 power + 2 signal pin configuration, combining high-current power delivery with auxiliary signal transmission in a single compact housing. This makes it ideal for applications where both power and communication (such as telemetry, sensing, or control signals) are required through one connector, reducing wiring complexity and improving system efficiency.

The connector uses precision-machined gold-plated brass contacts, ensuring excellent conductivity, minimal voltage drop, and strong resistance to oxidation and corrosion. This guarantees long-term stable performance even in demanding environments involving vibration, heat, and continuous electrical load.

The PCB through-hole (THT) mounting design allows direct integration onto printed circuit boards, eliminating the need for additional wiring in many applications. This results in cleaner PCB layouts, improved structural stability, and better space optimization, especially in compact drone power distribution systems and embedded control boards.

Engineered for high-current low-voltage applications, the XT30PB(2+2)-M.G.B ensures efficient energy transfer with low heat generation and stable current handling. Its secure friction-fit design provides strong mechanical retention, reducing the risk of accidental disconnection during operation in vibration-heavy environments such as UAVs, RC vehicles, and robotics systems.

The housing is made from high-temperature flame-retardant thermoplastic (UL94-V0 rated), offering excellent insulation, safety, and mechanical durability. This ensures reliable performance even in harsh operating conditions.

Key Features

Genuine Amass XT30(2+2)PB Male Connector (XT30PB-M.G.B)
Hybrid design: 2 power pins + 2 signal pins
PCB-mount (through-hole) connector structure
Gold-plated brass contacts for superior conductivity
Low resistance design for efficient power transfer
High-temperature UL94-V0 flame-retardant housing
Secure friction-fit connection for vibration resistance
Integrated power + signal transmission in one connector
Compact design for modern embedded systems
Long service life with high mating cycle durability
Easy solder-based PCB installation

Applications & Use Cases

The Amass XT30PB(2+2) Male Connector is widely used in advanced electronic systems, including:

FPV drones and UAV power + telemetry systems
RC cars, boats, trucks, and aircraft
Smart lithium battery packs with signal monitoring
Electronic Speed Controllers (ESCs) with telemetry
Brushless motor systems with sensors
Robotics and automation platforms
Embedded control and communication boards
DIY electronics and prototyping projects
3D printers and CNC machines with feedback systems
IoT devices requiring power + data integration
Industrial embedded electronics and smart modules

Technical Specifications

Brand: Amass
Model: XT30(2+2)PB-M.G.B
Connector Type: Male
Series: XT30PB (2+2)
Configuration: 2 Power + 2 Signal Pins
Mounting Type: Through Hole (PCB Mount)
Contact Material: Gold-plated brass
Housing Material: High-temperature thermoplastic (UL94-V0)
Current Rating: Up to 15–20A class (power pins, typical XT30 range)
Voltage Rating: Up to 500V DC
Contact Resistance: ≤1.2 mΩ (typical specification)
Mechanical Life: ~1000 mating cycles
Operating Temperature: -20°C to 120°C
Application Type: PCB-mounted hybrid power + signal connector

Why Choose This Connector?

The Amass XT30PB(2+2) Male Connector is ideal for engineers and designers who need a compact, integrated power and signal solution. Its hybrid design reduces wiring complexity, improves system reliability, and enables cleaner PCB layouts.

Compared to standard XT30 connectors, the 2+2 variant adds signal capability without significantly increasing size, making it a preferred choice for modern UAVs, smart batteries, and embedded electronic systems.

Package Includes