Visa

10pc 18cm 1.2mm Z-type Steel Wire Push Rod

From ₹ 139.71

Only 8 items left

25T 28.5mm Metal Servo Motor Horn Half Arm Red

From ₹ 185.37

Only 1 items left

Amass XT60 XT30 Fuse Smoke Plug, Tester Circuit Breaker

₹ 625.00

Product Description

The Amass XT60 XT30 Fuse Smoke Plug / Tester Circuit Breaker (1–6S Safety Plug) is a premium in-line protection device (smoke stopper) designed to safely test and power electronic systems such as FPV drones, RC aircraft, LiPo battery setups, ESCs, and embedded electronics. It acts as a resettable circuit breaker that prevents permanent damage during first power-up or troubleshooting by limiting current in case of a short circuit.

When connected between the battery and your device, it allows normal power flow if the circuit is correct. If a short or wiring fault is detected, it immediately limits current and “trips” the protection, preventing smoke, burnt components, and ESC/flight controller damage.

Key Function

Works as a temporary safety fuse + circuit breaker
Protects electronics during first power-on testing
Immediately reacts to short circuits or abnormal current draw
Uses a resettable PTC fuse system
Typically indicates status via LED (normal vs fault condition)

In simple terms: it’s a “first power-on insurance device” for drone builds.

Key Features

Compatible with XT30 and XT60 connectors
Supports 1–6S LiPo systems (up to ~30V)
Built-in resettable PTC fuse protection
Typical protection values:
- Hold current: ~0.5A
- Trip current: ~1A (varies slightly by model)
Fast response to short circuits (milliseconds-level cutoff behavior)
LED indicator for power/fault status (model dependent)
Reusable after fault removal (auto-reset type protection)
Lightweight and portable design
Designed specifically for drone/RC safety testing

Applications & Use Cases

First power-on testing of FPV drones
ESC, flight controller, and wiring verification
Battery pack safety checks
RC aircraft and robotics debugging
Preventing damage from soldering mistakes or shorts
Workshop safety tool for LiPo systems

Technical Specifications

Product Type: XT30 / XT60 Smoke Stopper (Circuit Breaker Plug)
Input Voltage: 1–6S (3–30V DC)
Connector Compatibility: XT30 / XT60
Protection Type: Resettable PTC fuse (self-resetting)
Hold Current: ~0.5A
Trip Current: ~1A
Function: Overcurrent + short-circuit protection
Reset Method: Automatic reset after disconnecting power
Material: Plastic housing + copper alloy contacts
Use Case: Temporary inline protection during testing

Why Choose This Device?

This smoke stopper is one of the most important low-cost safety tools in drone building. Instead of risking expensive ESCs, flight controllers, or batteries during first power-up, it gives you a controlled current limit so mistakes don’t instantly destroy components.

It is especially useful because even experienced builders can accidentally create shorts while soldering or wiring—this device acts as a fail-safe layer between your battery and electronics.

Package Includes

1 × Amass XT60 / XT30 Fuse Smoke Plug (Tester Circuit Breaker, 1–6S Safety Device)

Out of stock

FS-SM100 - USB Simulator Dongle Cable 1.5M Support FMS, VRC PRO

₹ 850.00

The FlySky FS-SM100 Simulator Dongle Cable is a practical training accessory designed for RC enthusiasts, drone pilots, and hobbyists who want to improve their flying skills using a computer-based simulator. This USB simulator dongle allows you to connect your compatible FlySky RC transmitter to your computer and practice flying in a safe virtual environment.

Compatible with popular flight simulation software such as FMS and VRC PRO, the FS-SM100 helps beginners learn basic controls and allows experienced pilots to refine advanced maneuvers without risking damage to their real RC models. Whether you're training for airplanes, helicopters, drones, or RC flight systems, this simulator dongle is a useful tool for improving accuracy and confidence.

The dongle features a USB interface for easy setup and reliable connection, while the 1.5-meter cable length offers comfortable movement during simulation sessions. Lightweight, portable, and easy to use, the FlySky FS-SM100 is ideal for practicing anytime and anywhere.

Key Features

USB simulator dongle cable for RC flight training
Compatible with FlySky RC transmitters
Supports popular simulator software like:
- FMS
- VRC PRO
Helps improve RC piloting skills without risking real equipment
Easy plug-and-play USB connection
1.5-meter cable for flexible and comfortable use
Lightweight and portable design
Suitable for beginners and experienced RC pilots
Ideal for aircraft, helicopter, drone, and RC simulation practice
CE certified for safe and reliable use

Technical Specifications

Specification	Details
Brand	FlySky
Model	FS-SM100
Type	Simulator Dongle
Resolution	1024
Data Port	USB
Power Source	USB
Supported Software	FMS, VRC PRO
Cable Length	1.5 meters
Weight	28g
Color	Black
Certification	CE

Applications

Suitable for:

RC Flight Simulator Practice
Drone Pilot Training
RC Airplane Simulation
RC Helicopter Training
Beginner RC Learning
Advanced Flight Maneuver Practice

Package Includes

1 x Simulator Dongle USB Analog Cable
1 x Large Round Patch Cord
1 x Small Round Adapter Cable

Only 1 items left

Amass XT60(2+1) Female Connector -XT60I-F.G.O Original Drone Connectors

From ₹ 120.51

Product Description

The Amass XT60(2+1) Female Connector (XT60I-F.G.O) is a high-quality 3-pin hybrid DC power connector designed for advanced power and signal integration in drones, UAV systems, robotics, smart battery packs, RC vehicles, and industrial electronic applications. Manufactured by Amass, a globally trusted connector brand, this XT60(2+1) series is engineered to provide reliable high-current power delivery along with an additional signal line, enabling smarter and more efficient electronic system design.

The XT60I-F.G.O Female Connector features a 2+1 pin architecture, consisting of two main power contacts and one auxiliary signal/identification pin. This additional pin is commonly used for functions such as battery identification, communication, or system recognition in smart power systems. This makes it highly suitable for next-generation UAV and battery management applications where simple power-only connectors are no longer sufficient.

It uses precision gold-flash plated brass contacts, ensuring excellent electrical conductivity, low resistance, and stable current transfer. This helps minimize heat generation and power loss during continuous operation, making it suitable for drone propulsion systems, ESC connections, and high-capacity lithium battery setups. The gold plating also enhances corrosion resistance, ensuring long-term reliability in outdoor and industrial environments.

The connector supports a straight cable-mount design with solder-type termination, allowing secure and durable wiring for field and manufacturing use. The housing is made from high-temperature PA (Polyamide) thermoplastic with UL94 V-0 flame-retardant rating, providing strong insulation, mechanical durability, and thermal stability under demanding conditions.

The XT60(2+1) series is typically rated for around 30A continuous current and up to 500V DC operation, depending on wire gauge and system configuration. This makes it suitable for medium-power UAV systems and smart electronic platforms where both power and signal communication are required.

Whether you're designing an advanced drone system, building a smart lithium battery pack, or developing robotics with integrated power monitoring, the Amass XT60(2+1) Female Connector provides a compact and intelligent connectivity solution.

Key Features

Genuine Amass XT60I-F.G.O Female Connector
2 power pins + 1 signal/communication pin (2+1 design)
Ideal for smart battery and identification systems
Gold-flash plated brass contacts for high conductivity
Low contact resistance for efficient power transfer
High-temperature PA (Polyamide) UL94 V-0 housing
Secure friction-fit cable-mount design
Supports power + signal integration in one connector
Strong resistance to vibration and mechanical stress
Easy solder-type wire termination
Long service life with stable performance

Applications & Use Cases

Smart UAV and drone battery systems
Lithium battery packs with communication/ID lines
Power Distribution Boards (PDBs)
ESC and flight controller integration
Robotics and automation systems
RC cars, boats, and aircraft
Industrial embedded electronics
IoT and smart power systems
Battery monitoring and management systems (BMS)
DIY electronics and prototyping

Technical Specifications

Brand: Amass
Model: XT60I-F.G.O
Connector Type: Female
Series: XT60(2+1) / XT60I
Pin Configuration: 2 power + 1 signal pin
Contact Material: Brass, gold-flash plated
Housing Material: PA (Polyamide), UL94 V-0 flame-retardant
Rated Current: ~30A continuous
Rated Voltage: 500V DC
Mounting Type: Cable mount, solder termination
Wire Compatibility: Typically 12–14 AWG
Operating Temperature: -20°C to 120°C
Mechanical Life: ~1000 mating cycles
Protection Rating: IP40

Why Choose This Connector?

The Amass XT60(2+1) Female Connector is designed for modern electronic systems that require more than just power delivery. Its additional signal pin enables smart communication between battery and device, improving system intelligence and safety.

Compared to standard XT60 connectors, it offers enhanced functionality without increasing size significantly, making it a strong choice for next-generation drones and smart power systems.

Package Includes

1 × Amass XT60I-F.G.O (XT60 2+1) Female Connector

Only 6 items left

Amass XT30PW30 Male Connector - XT30PW-M30.G.Y Original Drone Connectors

From ₹ 48.92

Product Description

The Amass XT30PW30 Male Connector (XT30PW-M30.G.Y) is a high-quality, compact PCB-mount power connector designed for reliable high-current electrical connections in drones, RC systems, robotics, and advanced embedded electronics. Manufactured by Amass, a globally trusted leader in professional connector solutions, this XT30PW series connector is engineered to deliver stable power transmission, low resistance, and long-lasting durability in compact and high-performance applications.

This XT30PW male connector features precision-machined gold-plated brass contacts enclosed in a high-temperature resistant nylon housing. The gold plating ensures excellent conductivity, reduced contact resistance, and strong anti-corrosion performance, enabling consistent electrical efficiency even under continuous high-load conditions.

The XT30PW30 design is a PCB through-hole mount connector, allowing direct integration onto printed circuit boards. This eliminates the need for additional wiring in many applications, resulting in cleaner PCB layouts, improved space utilization, and enhanced mechanical stability. It is especially suitable for drone power distribution boards, ESCs, embedded power systems, and compact electronic devices.

Designed for high-current, low-voltage applications, the XT30PW-M30.G.Y ensures efficient energy transfer with minimal voltage drop and heat generation. Its secure friction-fit mating system provides strong retention, reducing the risk of accidental disconnection in vibration-heavy environments such as UAVs, racing drones, and RC vehicles.

Engineered for modern electronics, this connector offers an ideal balance of compact size, high performance, and durability, making it a preferred choice for engineers, hobbyists, and manufacturers working on advanced power systems.

Key Features

Genuine Amass XT30PW30 Male Connector (XT30PW-M30.G.Y)
PCB-mount (through-hole) power connector design
Compact XT30 series for drones and RC applications
Gold-plated brass contacts for superior conductivity
High-temperature nylon housing for strength and insulation
Low resistance design for efficient power transfer
Secure friction-fit connection with strong mechanical retention
Space-saving PCB integration for clean circuit design
High vibration and shock resistance for UAV use
Long service life with high mating cycle durability
Easy solder-based PCB mounting

Applications & Use Cases

The Amass XT30PW30 Male Connector is widely used in various electronic and power systems, including:

FPV drones and UAV power distribution boards (PDBs)
RC cars, boats, trucks, and aircraft
Electronic Speed Controllers (ESCs)
Lithium Polymer (LiPo) battery systems
Brushless motor power connections
Robotics and automation systems
3D printers and CNC machines
Embedded PCB power supply circuits
DIY electronics and prototyping projects
IoT devices and smart embedded systems
Drone racing and high-performance UAV builds
Industrial control and compact power modules

Technical Specifications

Brand: Amass
Model: XT30PW-M30.G.Y
Connector Type: Male
Series: XT30PW30
Mounting Type: Through Hole (PCB Mount)
Contact Material: Gold-plated brass
Housing Material: High-temperature nylon
Current Rating: High-current low-voltage applications (XT30 class)
Contact Resistance: Ultra-low resistance
Application Type: PCB-mounted power connector
Operating Environment: High vibration and thermal stability

Why Choose This Connector?

The Amass XT30PW30 Male Connector is designed for engineers who require a compact, reliable, and PCB-integrated high-current power solution. Its through-hole structure ensures strong mechanical stability, while its gold-plated contacts guarantee consistent and efficient electrical performance.

Compared to traditional wired connectors, the XT30PW series provides a cleaner, more compact, and professional-grade solution, making it ideal for modern drone systems and embedded electronics where space and reliability are critical.

Package Includes

1 × Amass XT30PW30 Male Connector (XT30PW-M30.G.Y)

Only 101 items left

4pc M2x5+4 M2 Rubber Anti Vibration Damping Screws with Shock-absorbing Ring

From ₹ 253.00

Only 3 items left

Plastic GPS Antenna Foldable Mount Holder

From ₹ 217.44

ReadytoSky Lightweight Foldable GPS Mount – High-Clearance Antenna Support

Optimize your drone's GPS performance with the ReadytoSky Ultralight Foldable Antenna Mount. Specifically engineered for FPV racers, Toothpick builds, and compact quadcopters like the QAV250, this mount is the perfect solution for pilots looking to elevate their GPS puck away from electrical noise without adding significant bulk.

By positioning your GPS module above the carbon fiber frame and high-current electronics, you significantly reduce interference, leading to faster satellite acquisition and a more reliable "Return to Home" (RTH) failsafe. The 13cm height ensures the antenna clears top-mounted batteries, while the foldable pivot allows you to collapse the stand for easy transport in a backpack.

Key Highlights:

Ultralight 8g Profile: At just 8 grams, this mount is designed for weight-sensitive builds, providing the benefits of a high-gain antenna position without sacrificing flight agility.
Interference Isolation: Elevates your GPS/Magnetometer away from the "EMI-noisy" zone of the ESCs and motors, which is critical for accurate GPS-hold and navigation modes.
Durable Engineering Plastic: Crafted from high-impact composite plastic that is rigid enough to hold its position in flight but flexible enough to absorb vibrations and minor impact energy.
Space-Efficient Foldable Joint: Features a simple, secure folding mechanism that allows the antenna to lie flat against the frame during transport, preventing the mast from snapping.
Universal Frame Compatibility: Designed to mount easily to any standard carbon fiber top plate using just two screws, making it a "plug-and-play" upgrade for DIY drone projects.

Technical Specifications

Feature	Details
Brand	ReadytoSky
Material	High-Quality Composite Plastic
Height	13cm (Extended)
Diameter	3cm (Mounting Base)
Weight	8.0g
Design	Single-Pivot Foldable
Compatibility	QAV250, 5" FPV Freestylers, 7" Long Range

Pro-Builder Tip:

For the best satellite lock, always ensure your GPS module is mounted level on the top plate of the bracket. If you are flying an FPV drone with a high camera tilt, the foldable design allows you to slightly offset the mast to ensure the antenna stays pointing toward the sky while the drone is in forward flight!

Partsbaba Authenticity Guarantee: All ReadytoSky accessories are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, ensuring your drone's navigation system remains rock-solid.

Only 4 items left

Mini 5V Lost Buzzer with JST Female Plug

From ₹ 185.99

ReadytoSky Mini 5V Lost Model Buzzer – High-Decibel Recovery Alarm

Never lose track of your aircraft again with the ReadytoSky Mini 5V Lost Model Buzzer. This compact, high-output audible alarm is the ultimate insurance policy for FPV drones, fixed-wing planes, and RC vehicles. Designed to trigger a loud, piercing alert during a signal loss or a crash, this buzzer helps you locate your model in tall grass, thick brush, or out-of-sight landing zones.

Equipped with a pre-soldered JST Female Plug, this buzzer offers a true plug-and-play solution for flight controllers and power distribution boards. Its ultralight footprint makes it an essential addition to even the smallest micro-quads, where every gram counts.

Key Highlights:

High-Decibel Alert: Engineered to produce a sharp, clear tone that cuts through ambient noise, making it significantly easier to recover "lost" models.
Plug-and-Play JST Connector: Features a standard JST female plug for a secure, solder-free connection to compatible pins on your flight stack or receiver.
Ultralight & Compact: Small enough to be tucked into tight frames or taped to an arm without affecting the flight dynamics or center of gravity of your drone.
Low-Power Efficiency: Optimized to run on a standard 5V rail, ensuring it won't drain your flight battery while providing maximum volume.
Multi-Purpose Functionality: Can be configured via Betaflight, INAV, or ArduPilot to act as a low-battery warning, a lost-model alarm, or a status indicator (arming/disarming).

Technical Specifications

Feature	Details
Brand	ReadytoSky
Operating Voltage	5V DC
Connector Type	JST Female Plug
Sound Output	High-Decibel Active Piezo
Dimensions	Approx. 9mm x 5.5mm (Buzzer unit)
Compatibility	Drones, RC Cars, Boats, and Arduino Projects
Application	Lost Model Alarm / Low Battery Warning

Pro-Builder Tip:

To get the most out of your buzzer in Betaflight, head to the "Configuration" tab and ensure "Beeper" is enabled. You can then assign a specific switch on your transmitter to the BEEPER mode in the "Modes" tab. If you ever go down in high weeds, just flip the switch to activate a constant "SOS" tone for easy recovery!

Partsbaba Quality Commitment: All ReadytoSky components are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can fly with the confidence that you'll always find your way home.

Are you installing this on a racing drone for crash recovery, or are you looking to use it as a low-voltage alarm for a DIY electronics project?

Only 2 items left

Motor Mounting Stand for 35-72mm / 1.4-2.8in

₹ 534.66

Only 1 items left

M5 CW & CCW Propeller Fixed Adapter Nut Cap (1 pair)

From ₹ 116.11

Only 10 items left

Amass MR30 Male Connector - MR30-M.G.Y Original Drone Connectors

From ₹ 51.86

Product Description

The Amass MR30 Male Connector (MR30-M.G.Y) is a compact, high-performance 3-pin power connector designed for reliable electrical connections in drones, RC systems, robotics, and advanced electronic applications. Manufactured by Amass, a globally trusted leader in connector technology, this MR30 series connector is engineered to deliver stable current transfer, low resistance, and long-lasting durability in compact electronic systems.

This MR30 male connector features a unique 3-pin bullet-style design, consisting of three 2mm gold-plated bullet contacts housed inside a durable nylon shell. This structure ensures a secure, polarized connection that prevents reverse polarity and guarantees stable electrical contact during operation.

The connector is built using precision-machined gold-plated copper alloy terminals, ensuring excellent conductivity, reduced voltage drop, and strong resistance to oxidation. This allows the MR30 connector to maintain consistent performance even after repeated mating cycles in demanding environments such as drones and RC vehicles.

Designed for medium-current, low-voltage applications, the MR30-M.G.Y is widely used in FPV drones, brushless motor connections, ESC wiring, and compact battery systems. Its friction-fit design provides a strong mechanical lock that resists vibration, shock, and movement, making it ideal for high-performance UAV systems.

The housing is made from high-temperature flame-retardant thermoplastic (UL94-V0 rated), offering excellent insulation, thermal stability, and mechanical strength. Despite its compact size, the MR30 connector is engineered to handle relatively high electrical loads efficiently while maintaining safety and reliability.

Its 3-pin structure also makes it suitable for brushless motor phase connections, where stable multi-line current transfer is required. This makes it a preferred choice in drone propulsion systems and compact RC electronics.

Key Features

Genuine Amass MR30 Male Connector (MR30-M.G.Y)
3-pin bullet-style connector design
Gold-plated 2mm brass contacts for high conductivity
Compact and lightweight structure
Low resistance for efficient power transfer
High-temperature UL94-V0 flame-retardant housing
Secure friction-fit connection for vibration resistance
Polarized design prevents incorrect connection
Suitable for motor phase and power applications
Long service life with high mating cycle durability
Easy solder-type wire termination

Applications & Use Cases

The Amass MR30 Male Connector is widely used in various electronic and power systems, including:

FPV drones and UAV propulsion systems
Brushless motor phase connections
RC cars, boats, trucks, and aircraft
Electronic Speed Controllers (ESCs)
Lithium polymer (LiPo) battery systems
Robotics and automation systems
DIY electronics and prototyping projects
3D printers and CNC machines
Embedded electronic control systems
High-performance drone racing setups
Compact power distribution systems

Technical Specifications

Brand: Amass
Model: MR30-M.G.Y
Connector Type: Male
Series: MR30
Pin Configuration: 3-Pin Bullet Connector
Contact Material: Gold-plated copper alloy
Housing Material: High-temperature thermoplastic (UL94-V0)
Current Rating: ~15–30A class depending on application
Voltage Rating: Up to 500V DC
Operating Temperature: -20°C to 120°C
Mechanical Life: ~100–1000 mating cycles depending on usage
Application Type: Power + motor phase connector
Mounting Type: Solder wire connection

Why Choose This Connector?

The Amass MR30 Male Connector is designed for users who need a compact, reliable, and efficient multi-pin power solution. Its gold-plated contacts ensure stable conductivity, while its robust housing provides durability in high-vibration environments.

Compared to standard 2-pin connectors, the MR30 offers multi-line current capability in a single compact housing, making it ideal for brushless motor applications and advanced drone systems.

Package Includes

1 × Amass MR30 Male Connector (MR30-M.G.Y)

In stock

Amass MR60 Male Connector - MR60-M.G.Y Original Drone Connectors

From ₹ 70.15

Product Description

The Amass MR60 Male Connector (MR60-M.G.Y) is a high-quality 3-pin high-current DC power connector designed for secure and efficient motor-to-ESC and battery power connections in drones, RC vehicles, robotics, UAV systems, and industrial electronic applications. Manufactured by Amass, a globally trusted connector brand, the MR60 series is engineered to deliver stable current handling, low contact resistance, and strong mechanical durability in compact electronic systems.

The MR60-M.G.Y Male Connector features a 3-pin bullet-style contact system (3.5 mm contacts) housed in a durable insulated shell. This design ensures a secure, low-resistance connection between power components, making it especially suitable for motor phase wiring in drones and high-performance RC setups. Each contact is precision-machined and gold-flash plated, providing excellent conductivity and long-term resistance against oxidation and corrosion.

Designed for medium-high current applications, the MR60 connector supports approximately 30A continuous current (with higher peak capability depending on conditions) and operates safely up to 500V DC, making it suitable for UAV propulsion systems, ESC connections, and power distribution lines.

The housing is made from high-temperature PA66 (polyamide) thermoplastic with UL94 V-0 flame-retardant rating, ensuring excellent insulation, thermal stability, and mechanical strength. This allows the connector to withstand vibration, shock, and continuous electrical load—conditions commonly found in drones, robotics, and mobile platforms.

A key advantage of the MR60 series is its integrated 3-pin design, which replaces multiple individual bullet connectors with a single compact housing, simplifying wiring and improving safety and reliability in motor connections.

Whether you're assembling a drone propulsion system, building a robotics platform, or working on an RC project, the Amass MR60 Male Connector offers a reliable balance of performance, durability, and compact design.

Key Features

Genuine Amass MR60-M.G.Y Male Connector
3-pin (3.5 mm bullet-style) high-current connector
Gold-flash plated brass contacts for high conductivity
Low contact resistance for efficient power transfer
Rated for ~30A continuous current (application dependent)
Supports up to 500V DC systems
High-temperature PA66 UL94 V-0 flame-retardant housing
Compact integrated 3-wire motor connector design
Strong vibration and mechanical resistance
Easy solder-type wire termination
Long service life with stable performance

Applications & Use Cases

Drone motor (ESC) phase connections
FPV racing drones and UAV systems
Agricultural and industrial drones
RC cars, boats, and aircraft
Robotics and automation systems
Electronic Speed Controllers (ESCs)
Power distribution systems
DIY electronics and prototyping
Battery-powered motor systems
Industrial embedded electronics

Technical Specifications

Brand: Amass
Model: MR60-M.G.Y
Connector Type: Male
Series: MR60
Pin Configuration: 3-pin (3.5 mm bullet type)
Contact Material: Brass, gold-flash plated
Housing Material: PA66 (Polyamide), UL94 V-0 flame-retardant
Rated Current: ~30A (continuous)
Rated Voltage: 500V DC
Wire Compatibility: Up to 12 AWG
Mechanical Life: ~1000 mating cycles
Operating Temperature: -20°C to 120°C
Mounting Type: Cable mount, solder termination
Protection Rating: IP40

Why Choose This Connector?

The Amass MR60 Male Connector is ideal for users who need a compact, reliable, and integrated 3-phase power connector for motor systems. Instead of using three separate bullet connectors, it provides a single unified, safer, and more organized wiring solution.

Its combination of high-current capability, rugged insulation, and Amass build quality makes it a preferred choice in drone propulsion and robotics applications.

Package Includes

1 × Amass MR60 Male Connector (MR60-M.G.Y)

Only 159 items left

3.5mm Gold-plated Bullet Male & Female Banana Connector

From ₹ 37.00

₹ 29.54 each

In stock

XT-60 Male & Female Plug Connector Yellow for Battery Quadcopter Multicopter

From ₹ 50.21

Readytosky XT60 Connector Pair (Male & Female) – High-Current Power Interface

Ensure a rock-solid power foundation for your FPV drone, RC aircraft, or DIY robotics project with the Readytosky XT60 Connector Set. Widely regarded as the industry standard for mid-to-high power applications, these connectors are engineered to provide a secure, low-resistance path between your LiPo battery and your Power Distribution Board (PDB) or ESC.

Molded from high-temperature nylon, the XT60 is designed to maintain its structural integrity even during high-heat soldering or intense current draws. The gold-plated spring connectors ensure maximum surface contact, preventing the voltage drops and loose connections that can lead to catastrophic flight failures.

Key Highlights:

High-Amp Reliability: Engineered to handle over 60A of continuous current without overheating, making them the perfect match for powerful brushless motor setups.
Heat-Resistant Nylon: The robust housing prevents the connector from melting or deforming during the soldering process or under heavy electrical loads.
Non-Reversible Design: The asymmetrical shape prevents accidental reverse-polarity connections, protecting your expensive flight controllers and ESCs from short circuits.
Gold-Plated Precision: Features premium gold-plating on the internal bullet connectors to minimize resistance and maximize electrical efficiency.
Universal Compatibility: The "Must-Have" connector for 3S to 6S LiPo batteries and standard F450, 250mm, and racing drone frames.

Technical Specifications

Feature	Details
Brand	Readytosky
Connector Type	XT60 (Male & Female Pair)
Body Material	High-Temp Flame Retardant Nylon
Internal Material	Gold-Plated Copper
Rated Current	60A+
Connector Length	~12mm (approx.)
Internal Diameter	3.5mm Bullet
Color	Signature Yellow

Pro-Tip for Builders:

When soldering these connectors, it is always best to plug the male and female ends together first. This helps act as a heat sink and ensures the pins stay perfectly aligned even if the plastic softens slightly from the soldering iron.

Partsbaba Quality Commitment: All Readytosky connectors are 100% genuine and original. We provide a 14-day replacement warranty against manufacturing defects, ensuring your high-power connections are safe and reliable from day one.

Only 4 items left

DF13 4-Pin Flight Controller Cable 20Cm for Multirotor Quadcopter

From ₹ 119.06

Readytosky DF13 4-Pin Flight Controller Cable (20cm) – Precision Data Connectivity

Streamline your drone’s internal wiring with the Readytosky DF13 4-Pin Cable. Specifically engineered for high-reliability data transmission, this cable is the industry standard for connecting critical peripherals to APM and Pixhawk flight controllers. Whether you are wiring up a GPS module, an external compass, or a telemetry radio, the Hirose-style DF13 connector ensures a vibration-resistant, "locked-in" connection that won't vibrate loose during aggressive maneuvers.

At 20cm in length, this cable provides the perfect amount of reach for standard F450 or 250mm frames without creating unnecessary "spaghetti" wiring that can interfere with your flight controller's IMU or compass.

Key Highlights:

Genuine Hirose DF13 Series Interface: Features the low-profile, high-density connector used by professional-grade flight controllers for dependable sensor communication.
Flexible 20cm Length: Offers enough slack for clean routing around frame plates while remaining short enough to minimize signal interference.
4-Pin Data Configuration: Perfectly mapped for I2C (Compass) or Serial (Telemetry/GPS) data protocols commonly found in ArduPilot and PX4 ecosystems.
Vibration Resistant: Designed to maintain a secure electrical contact even in the high-frequency vibration environment of a multirotor.
Universal APM/Pixhawk Compatibility: A direct "plug-and-play" replacement or expansion cable for APM 2.6, 2.8, and early Pixhawk hardware.

Technical Specifications

Feature	Details
Brand	Readytosky
Connector Type	DF13 (4-Pin)
Series	Hirose DF13 Compatible
Cable Length	200mm (20cm)
Pitch	1.25mm
Compatibility	APM / Pixhawk / GPS / Telemetry
Application	Multirotors, Fixed-Wing, and DIY Robotics

Installation Pro-Tip:

DF13 connectors are designed for a very tight fit. When disconnecting, always use a small pair of tweezers or a fingernail to grip the plastic housing itself rather than pulling on the silicone wires to prevent pin damage.

Partsbaba Quality Commitment: All Readytosky cables are 100% genuine and original. We provide a 14-day replacement warranty against manufacturing defects, ensuring your mission-critical data links are secure

Only 9 items left

3.5mm Gold-plated Cross Male & Female Banana Connector

From ₹ 37.70

Only 43 items left

Amass Connector XT30UD Male - XT30UD-M.G.Y Drone Connectors

From ₹ 56.00

Product Description

The Amass XT30UD Male Connector (XT30UD-M.G.Y Drone Connector) is a high-performance, compact power connector designed for secure and efficient electrical connections in demanding electronic applications. Manufactured by Amass, a globally recognized brand in RC and drone connectivity solutions, the XT30UD series is engineered to deliver stable current flow while maintaining a lightweight and space-saving design.

This XT30UD male connector features a durable gold-plated brass contact system housed in a high-temperature nylon body, ensuring excellent conductivity, minimal resistance, and long-term durability even under high-load conditions. The connector is designed specifically for high-current, low-voltage applications, making it a preferred choice in drones, RC models, robotics, and battery-powered systems.

The ultra-compact XT30 form factor allows it to replace larger connectors while still supporting reliable power transfer. Its anti-spark and low-resistance design reduces heat generation, improving overall system efficiency and safety. The ergonomic housing ensures a firm grip during plug/unplug operations, minimizing wear and accidental disconnections during vibration-heavy environments like UAV flight.

Engineers, drone builders, and RC enthusiasts prefer the XT30UD series for its balance of compact size, high current capacity, and superior reliability. Whether used in DIY drone builds or professional electronic assemblies, this connector ensures consistent performance and safe power delivery.

Key Features

Genuine Amass XT30UD Male Connector (XT30UD-M.G.Y)
Compact and lightweight high-current connector design
Gold-plated brass contacts for superior conductivity
High-temperature nylon housing for durability and insulation
Low resistance and efficient power transfer
Secure friction-fit connection with anti-spark characteristics
Vibration-resistant design for drones and RC systems
Easy soldering terminals for wire attachment
Long service life with high mating cycle durability
Ideal replacement for larger, bulkier connectors

Applications & Use Cases

The XT30UD Male Connector is widely used in high-performance electronic and power systems, including:

FPV drones and UAV power systems
RC cars, trucks, boats, and aircraft
Lithium polymer (LiPo) battery connections
ESC (Electronic Speed Controller) wiring
Brushless motor power supply connections
Robotics and automation systems
DIY electronics and prototyping projects
High-current battery packs and power modules
Portable power systems and backup units
3D printing and CNC machine power systems
IoT and embedded systems requiring stable power delivery
Racing drones and high-speed FPV setups

Technical Specifications

Brand: Amass
Model: XT30UD-M.G.Y
Connector Type: Male
Series: XT30UD
Material: Gold-plated brass contacts
Housing Material: High-temperature nylon
Rated Current: High-current low-voltage application (XT30 class)
Contact Resistance: Ultra-low resistance design
Mounting Type: Wire solder connection
Application Type: Power connector for electronics and RC systems
Operating Environment: Vibration and high-load resistant

Why Choose This Connector?

The Amass XT30UD Male Connector is engineered for users who demand reliable, compact, and high-efficiency power connections. Its robust construction ensures stable performance in high-current applications, while its compact size makes it ideal for modern lightweight drone and RC designs.

Compared to traditional bulky connectors, the XT30UD offers a superior balance of size, safety, and conductivity, making it a go-to choice for professionals and hobbyists alike.

Package Includes

1 × Amass XT30UD Male Connector (XT30UD-M.G.Y Drone Connector)

In stock

Amass XT30U Female Bullet Connector - XT30U-F.G.Y Drone Connectors

From ₹ 51.00

Product Description

The Amass XT30U Female Bullet Connector (XT30U-F.G.Y) is a high-quality, compact, and reliable power connector designed for secure high-current electrical connections in drones, RC systems, robotics, and compact electronic applications. Manufactured by Amass, a leading brand in professional-grade connector solutions, this XT30U series connector is engineered to deliver stable power transfer with minimal resistance and maximum durability.

This XT30U female connector features precision-engineered gold-plated brass bullet contacts housed inside a high-temperature nylon body. The gold plating ensures excellent conductivity, reduced oxidation, and long-term stable performance even after thousands of mating cycles. Its compact design makes it ideal for space-constrained electronic assemblies such as UAVs and embedded systems.

Designed specifically for low-voltage, high-current applications, the XT30U-F.G.Y provides a secure friction-fit connection that minimizes power loss and heat buildup. The connector is optimized for vibration-heavy environments, making it highly reliable in drones, RC vehicles, and mobile robotics where consistent electrical performance is critical.

The XT30U series design is widely preferred in modern electronics due to its lightweight structure, compact footprint, and strong current-handling capability. Its ergonomic shape ensures easy soldering and safe handling during assembly, repair, and prototyping tasks.

Whether used in professional UAV builds or DIY electronics projects, this connector guarantees safe, efficient, and long-lasting power connectivity.

Key Features

Genuine Amass XT30U Female Connector (XT30U-F.G.Y)
Compact high-current connector for drones and RC systems
Gold-plated brass bullet contacts for superior conductivity
High-temperature nylon housing for durability and heat resistance
Low resistance design for efficient power transfer
Secure friction-fit connection with strong retention
Compact and lightweight design for space-saving builds
Resistant to vibration, heat, and mechanical stress
Supports multiple plug/unplug cycles with minimal wear
Easy soldering terminals for wire integration

Applications & Use Cases

The Amass XT30U Female Connector is widely used across multiple electronic and power systems, including:

FPV drones and UAV power systems
RC cars, trucks, boats, and aircraft
Lithium Polymer (LiPo) battery connections
ESC (Electronic Speed Controller) wiring
Brushless motor power distribution
Robotics and automation systems
DIY electronics and prototyping projects
Battery packs and portable power modules
3D printers and CNC machine power systems
IoT and embedded electronic devices
High-current compact power circuits
Drone racing and aerial photography systems

Technical Specifications

Brand: Amass
Model: XT30U-F.G.Y
Connector Type: Female
Series: XT30U
Material: Gold-plated brass contacts
Housing Material: High-temperature nylon
Current Rating: High-current low-voltage application (XT30 class)
Contact Resistance: Ultra-low resistance
Mounting Type: Wire solder connection
Application Type: Power connector for electronic systems
Operating Environment: High vibration and thermal stability

Why Choose This Connector?

The Amass XT30U Female Bullet Connector is designed for users who demand reliable, compact, and high-efficiency power connections in modern electronic systems. Its robust construction ensures stable performance under high load conditions, while its compact size makes it ideal for lightweight drone and RC builds.

Compared to larger connector systems, the XT30U provides an excellent balance of size, durability, and electrical performance, making it a trusted choice among engineers, hobbyists, and manufacturers.

Package Includes

1 × Amass XT30U Female Bullet Connector (XT30U-F.G.Y Drone Connector)

In stock

Amass HXT 4mm Bullet Female connector - GC4010-F.G Drone Connectors

From ₹ 34.70

Product Description

The Amass HXT 4mm Bullet Female Connector (GC4010-F.G) is a high-quality, precision-engineered power connector designed for secure and efficient high-current electrical connections in drones, RC systems, robotics, and advanced electronic applications. Manufactured by Amass, a globally trusted leader in professional connector technology, this connector is built to deliver stable performance, low resistance, and long-lasting durability in demanding environments.

This 4mm female bullet connector features a robust gold-plated brass contact system, ensuring excellent electrical conductivity, reduced power loss, and superior corrosion resistance. The gold plating helps maintain consistent performance even after repeated mating cycles, making it ideal for long-term use in high-vibration and high-load applications.

The GC4010-F.G is designed as part of the HXT / 4mm bullet connector series, widely used in RC and drone power systems. It provides a tight and secure friction-fit connection with compatible 4mm male bullet connectors, ensuring stable current flow without accidental disconnection during operation.

Its non-insulated, solder-type design allows easy wire attachment, making it suitable for custom builds, repairs, and high-performance power systems. The connector is engineered to handle significant current loads while maintaining low contact resistance and efficient energy transfer.

Built for reliability, the connector is commonly used in environments where vibration, heat, and continuous load are present, such as drone propulsion systems and RC racing setups. Its compact cylindrical structure allows flexible integration into tight electronic assemblies.

Key Features

Genuine Amass GC4010-F.G 4mm Female Bullet Connector
Gold-plated brass contacts for high conductivity and durability
Designed for high-current RC and drone applications
Secure friction-fit connection with 4mm male bullets
Low resistance design for efficient power transfer
High durability under vibration and mechanical stress
Solder-type wire termination for strong electrical joints
Compact cylindrical design for flexible installation
Stable performance under continuous load conditions
Corrosion-resistant gold plating for long service life

Applications & Use Cases

The Amass HXT 4mm Bullet Female Connector is widely used in various electronic and power systems, including:

FPV drones and UAV power systems
RC cars, trucks, boats, and aircraft
Lithium polymer (LiPo) battery connections
Electronic Speed Controllers (ESCs)
Brushless motor power wiring
Robotics and automation systems
DIY electronics and prototyping projects
Battery pack assembly and maintenance
3D printers and CNC machine power systems
High-current power distribution systems
Industrial embedded electronic systems

Technical Specifications

Brand: Amass
Model: GC4010-F.G
Series: HXT / 4mm Bullet Series
Connector Type: Female Bullet Connector
Size: 4mm
Contact Material: Gold-plated brass
Housing Type: Non-insulated cylindrical body
Current Rating: High-current applications (typically up to ~30–40A class depending on setup)
Contact Resistance: Very low (~0.55 mΩ typical range)
Mounting Type: Solder wire connection
Application Type: High-power electrical connector
Operating Environment: Vibration and thermal resistant design

Why Choose This Connector?

The Amass HXT 4mm Female Bullet Connector is designed for users who require a reliable, efficient, and durable high-current connection solution. Its gold-plated contacts ensure long-term conductivity, while its tight friction-fit design provides stable electrical contact even in demanding conditions.

Compared to smaller bullet connectors, the 4mm series offers a strong balance of current handling capacity, compact size, and mechanical reliability, making it one of the most widely used connector types in RC and drone power systems.

Package Includes

1 × Amass HXT 4mm Bullet Female Connector (GC4010-F.G)

Only 19 items left

Amass XT30ULW Female Connector - XT30ULW-F.G.Y.b Original Drone Connectors

From ₹ 59.00

Product Description

The Amass XT30ULW Female Connector (XT30ULW-F.G.Y.b) is a compact, high-performance power connector designed for reliable and efficient high-current electrical connections in drones, RC systems, robotics, and advanced embedded electronic applications. Manufactured by Amass, a globally trusted leader in professional connector solutions, this XT30ULW series connector is engineered for superior conductivity, mechanical strength, and long-term durability in demanding environments.

This female XT30ULW connector features precision-machined gold-plated brass contacts, ensuring excellent electrical conductivity, minimal resistance, and strong corrosion resistance. The gold flash plating enhances durability and ensures stable performance even after repeated mating cycles, making it ideal for applications requiring consistent and safe power delivery.

The XT30ULW series is designed as an upgraded compact connector solution for modern UAVs and electronics, offering a lightweight structure with high current handling capability. It is widely used in drone power systems, ESC connections, and battery interfaces where compact size and reliable performance are critical.

Engineered for high-current, low-voltage applications, the XT30ULW-F.G.Y.b provides efficient energy transfer with minimal voltage drop and reduced heat generation. Its secure friction-fit design ensures a tight and stable connection with compatible male connectors, preventing accidental disconnection even in high-vibration environments such as drones, RC cars, and robotics systems.

The connector is built using high-temperature flame-retardant thermoplastic (UL94-V0 rated), ensuring safety, insulation stability, and resistance to heat and mechanical stress. Its compact 2-pin design allows easy integration into space-constrained PCB layouts and wire-to-board systems.

With a strong balance of size, durability, and electrical performance, the XT30ULW series is widely preferred by engineers, drone builders, and electronics manufacturers for both prototyping and production-grade applications.

Key Features

Genuine Amass XT30ULW Female Connector (XT30ULW-F.G.Y.b)
Compact high-current connector for drones and RC systems
Gold-plated brass contacts for excellent conductivity
Low resistance design for efficient power transfer
UL94-V0 flame-retardant housing for safety
Lightweight and compact design for modern electronics
Secure friction-fit connection for vibration resistance
High durability with long mating cycle life
Easy solder-type wire termination
Optimized for compact PCB and wiring layouts

Applications & Use Cases

The Amass XT30ULW Female Connector is widely used in various electronic and power systems, including:

FPV drones and UAV power systems
RC cars, boats, trucks, and aircraft
Lithium polymer (LiPo) battery connections
Electronic Speed Controllers (ESCs)
Brushless motor power systems
Robotics and automation projects
DIY electronics and prototyping circuits
Battery pack assembly and repair
3D printers and CNC machine power systems
IoT and embedded electronics
High-performance drone racing systems
Industrial compact power modules

Technical Specifications

Brand: Amass
Model: XT30ULW-F.G.Y.b
Connector Type: Female
Series: XT30ULW
Pin Count: 2
Contact Material: Gold-plated brass
Housing Material: High-temperature thermoplastic (UL94-V0 rated)
Current Rating: Up to 15–20A class (depending on wire and conditions)
Voltage Rating: Up to 500V DC
Operating Temperature: -20°C to 120°C
Mechanical Durability: ~1000 mating cycles
Contact Resistance: Low resistance design (~milliohm range typical)
Application Type: High-power wire-to-board connector
Mounting Type: Solder wire connection

Why Choose This Connector?

The Amass XT30ULW Female Connector is designed for users who need a compact, safe, and high-efficiency power connection solution. Its gold-plated contacts ensure reliable conductivity, while its flame-retardant housing enhances safety in high-load applications.

Compared to older XT30 variants, the ULW series offers improved compactness, durability, and safer material construction, making it ideal for modern drone and embedded electronic systems where performance and reliability are critical.

Package Includes

1 × Amass XT30ULW Female Connector (XT30ULW-F.G.Y.b)

Out of stock

Amass XT30(2+2) Female Connector - XT30(2+2)-F.G.B Drone Connectors

From ₹ 90.00

Product Description

The Amass XT30(2+2) Female Connector (XT30(2+2)-F.G.B) is a compact, high-performance hybrid power and signal connector designed for reliable electrical connections in drones, RC systems, robotics, and advanced electronic applications. Manufactured by Amass, a globally trusted leader in professional connector technology, this connector is engineered to deliver stable power transmission, secure signal handling, and long-term durability in compact electronic systems.

This XT30(2+2) female connector combines standard XT30 high-current power terminals with additional signal pins in a single integrated housing. The “2+2” configuration typically includes two main power contacts (positive and negative) along with two auxiliary signal pins, making it ideal for applications requiring both power delivery and communication or sensing in one connector system.

The connector features precision-machined gold-plated brass contacts, ensuring excellent electrical conductivity, low resistance, and strong corrosion resistance. This ensures stable performance even under continuous load conditions and repeated mating cycles, which is essential in demanding drone and RC environments.

Designed for high-current, low-voltage applications, the XT30(2+2)-F.G.B provides efficient energy transfer with minimal voltage drop and heat generation. Its secure locking and friction-fit design ensure stable connection even under vibration, shock, and movement, making it highly reliable for UAVs, racing drones, and robotics systems.

The housing is made from high-temperature flame-retardant thermoplastic (UL94-V0 rated), offering excellent insulation, thermal stability, and mechanical strength. Its compact integrated structure reduces wiring complexity, making PCB layouts and system integration cleaner and more efficient.

This connector is widely used by engineers and manufacturers who require both power + signal integration in a single compact connector, improving system reliability and reducing assembly complexity.

Key Features

Genuine Amass XT30(2+2) Female Connector (XT30(2+2)-F.G.B)
Integrated power + signal connector design
Gold-plated brass contacts for high conductivity
Compact XT30 form factor with extended signal capability
High-temperature UL94-V0 flame-retardant housing
Low resistance design for efficient power transfer
Secure friction-fit connection for vibration resistance
Combines power delivery and auxiliary signal lines
High durability with long mating cycle life
Easy solder-type wire termination

Applications & Use Cases

The Amass XT30(2+2) Female Connector is widely used in advanced electronic and power systems, including:

FPV drones and UAV power + telemetry systems
RC cars, boats, trucks, and aircraft
Lithium polymer (LiPo) battery systems with signal monitoring
Electronic Speed Controllers (ESCs) with telemetry support
Brushless motor and sensor-integrated systems
Robotics and automation systems
Smart battery packs with communication lines
DIY electronics and advanced prototyping
3D printers and CNC machines with sensor feedback systems
IoT and embedded electronics requiring power + data integration
Industrial control and smart power modules

Technical Specifications

Brand: Amass
Model: XT30(2+2)-F.G.B
Connector Type: Female
Series: XT30 (2+2)
Configuration: 2 Power + 2 Signal Pins
Contact Material: Gold-plated brass
Housing Material: High-temperature thermoplastic (UL94-V0)
Current Rating: Up to 20A class for power pins (typical XT30 range)
Voltage Rating: Up to 500V DC
Operating Temperature: -20°C to 120°C
Contact Resistance: ≤1.2 mΩ
Mechanical Life: ~100 mating cycles
Application Type: Power + signal PCB/wire connector
Mounting Type: Solder wire connection

Why Choose This Connector?

The XT30(2+2) Female Connector is ideal for advanced drone and embedded systems where both power delivery and signal communication are required in a compact footprint. Its integrated design reduces wiring complexity, improves reliability, and enhances system efficiency.

Compared to standard XT30 connectors, the 2+2 variant offers additional functionality without significantly increasing size, making it a preferred choice for modern UAVs and smart electronic systems.

Package Includes

1 × Amass XT30(2+2) Female Connector (XT30(2+2)-F.G.B)

In stock

Amass XT30PB(2+2) Male Connector - XT30(2+2)PB-M.G.B

From ₹ 64.20

Product Description

The Amass XT30PB(2+2) Male Connector (XT30(2+2)PB-M.G.B) is a high-performance PCB-mount hybrid power connector designed for compact, reliable, and efficient electrical connections in drones, RC systems, robotics, and advanced embedded electronic applications. Manufactured by Amass, a globally trusted brand in professional connector solutions, this XT30PB series connector is engineered to deliver stable power transmission, low resistance, and integrated signal capability in modern electronic systems.

This XT30(2+2) male connector features a unique 2 power + 2 signal pin configuration, combining high-current power delivery with auxiliary signal transmission in a single compact housing. This makes it ideal for applications where both power and communication (such as telemetry, sensing, or control signals) are required through one connector, reducing wiring complexity and improving system efficiency.

The connector uses precision-machined gold-plated brass contacts, ensuring excellent conductivity, minimal voltage drop, and strong resistance to oxidation and corrosion. This guarantees long-term stable performance even in demanding environments involving vibration, heat, and continuous electrical load.

The PCB through-hole (THT) mounting design allows direct integration onto printed circuit boards, eliminating the need for additional wiring in many applications. This results in cleaner PCB layouts, improved structural stability, and better space optimization, especially in compact drone power distribution systems and embedded control boards.

Engineered for high-current low-voltage applications, the XT30PB(2+2)-M.G.B ensures efficient energy transfer with low heat generation and stable current handling. Its secure friction-fit design provides strong mechanical retention, reducing the risk of accidental disconnection during operation in vibration-heavy environments such as UAVs, RC vehicles, and robotics systems.

The housing is made from high-temperature flame-retardant thermoplastic (UL94-V0 rated), offering excellent insulation, safety, and mechanical durability. This ensures reliable performance even in harsh operating conditions.

Key Features

Genuine Amass XT30(2+2)PB Male Connector (XT30PB-M.G.B)
Hybrid design: 2 power pins + 2 signal pins
PCB-mount (through-hole) connector structure
Gold-plated brass contacts for superior conductivity
Low resistance design for efficient power transfer
High-temperature UL94-V0 flame-retardant housing
Secure friction-fit connection for vibration resistance
Integrated power + signal transmission in one connector
Compact design for modern embedded systems
Long service life with high mating cycle durability
Easy solder-based PCB installation

Applications & Use Cases

The Amass XT30PB(2+2) Male Connector is widely used in advanced electronic systems, including:

FPV drones and UAV power + telemetry systems
RC cars, boats, trucks, and aircraft
Smart lithium battery packs with signal monitoring
Electronic Speed Controllers (ESCs) with telemetry
Brushless motor systems with sensors
Robotics and automation platforms
Embedded control and communication boards
DIY electronics and prototyping projects
3D printers and CNC machines with feedback systems
IoT devices requiring power + data integration
Industrial embedded electronics and smart modules

Technical Specifications

Brand: Amass
Model: XT30(2+2)PB-M.G.B
Connector Type: Male
Series: XT30PB (2+2)
Configuration: 2 Power + 2 Signal Pins
Mounting Type: Through Hole (PCB Mount)
Contact Material: Gold-plated brass
Housing Material: High-temperature thermoplastic (UL94-V0)
Current Rating: Up to 15–20A class (power pins, typical XT30 range)
Voltage Rating: Up to 500V DC
Contact Resistance: ≤1.2 mΩ (typical specification)
Mechanical Life: ~1000 mating cycles
Operating Temperature: -20°C to 120°C
Application Type: PCB-mounted hybrid power + signal connector

Why Choose This Connector?

The Amass XT30PB(2+2) Male Connector is ideal for engineers and designers who need a compact, integrated power and signal solution. Its hybrid design reduces wiring complexity, improves system reliability, and enables cleaner PCB layouts.

Compared to standard XT30 connectors, the 2+2 variant adds signal capability without significantly increasing size, making it a preferred choice for modern UAVs, smart batteries, and embedded electronic systems.

Package Includes

1 × Amass XT30PB(2+2) Male Connector (XT30(2+2)PB-M.G.B)

Only 6 items left

Pixhawk buzzer

From ₹ 165.25

Out of stock

APM / PIX Glass Fiber Shock Absorber Anti-vibration

From ₹ 271.34

Only 1 items left

25T M3 Metal Servo Motor Horn Arm Red

From ₹ 133.52

Only 5 items left

1pc Dumping Rubber for APM PIX Glass Fiber Shock Absorber Blue

From ₹ 39.51

₹ 34.44 each

In stock

4Pcs Anti Vibration Rubber Balls Blue

From ₹ 119.06

Readytosky Anti-Vibration Gimbal Dampeners (4-Piece Set) – Eliminate "Jello" Effect

Achieve professional-grade, cinematic stability with the Readytosky Anti-Vibration Rubber Dampeners. Specifically engineered for gimbal mounting plates on DJI Phantom series drones and custom FPV camera rigs, these high-elasticity silicone balls act as a mechanical low-pass filter. By absorbing high-frequency motor vibrations and frame resonance, they effectively eliminate the "jello effect" in your video, ensuring buttery-smooth footage even during aggressive flight maneuvers.

These dampeners are the ideal balance between "soft" for vibration absorption and "firm" for structural support, making them a must-have for any aerial photography or videography platform.

Key Highlights:

Advanced Vibration Isolation: Effectively decouples the camera gimbal from the drone frame, neutralizing the micro-shakes that cause distorted or wavy video.
Precision Silicone Build: Crafted from durable, high-grade silicone that maintains its elasticity in both extreme cold and high-heat environments.
High Load Capacity: Each ball is rated to support between 120g and 180g, allowing a 4-piece set to easily stabilize a standard gimbal and action camera setup.
Ultralight Profile: At just 1.5g per unit, these dampeners provide maximum stabilization without impacting your drone’s center of gravity or flight time.
Standard Fitment: Designed with a 7mm inner diameter to fit most standard gimbal mounting holes found on DJI Phantom 2, 3, and various 3D-printed or carbon fiber mounts.

Technical Specifications

Feature	Details
Brand	Readytosky
Quantity	4 Pieces
Material	High-Elasticity Silicone
Color	Vibrant Blue
Dimensions	21mm (H) x 17mm (W)
Inner Diameter	7mm
Weight	1.5g per ball
Load Rating	120g – 180g (per ball)

Installation Pro-Tip:

For maximum security, especially on larger camera rigs, we recommend threading a small, loose-fitting zip tie through the center of the dampening balls. This acts as a "safety tether" to prevent the gimbal from separating from the frame in the event of a hard landing or extreme impact.

Partsbaba Quality Assurance: We only supply 100% genuine and original Readytosky components. Your purchase is protected by our 14-day replacement warranty against manufacturing defects. For full details on returns, please visit our support page.

Only 6 items left

4Pcs M3 Anti-vibration Rubber Shock Absorber Ball Red 3x8mm

From ₹ 119.06

Readytosky M3x8mm Anti-Vibration Standoffs (4-Piece Set) – High-Performance FC Soft-Mounting

Eliminate high-frequency noise and mechanical resonance with the Readytosky M3x8mm Anti-Vibration Dampeners. These specialized "soft-mount" standoffs are engineered to isolate your flight controller and sensitive IMU (gyroscope) from the vibrations generated by high-speed motors and unbalanced propellers. By decoupling the "brain" of your drone from the frame, these dampeners significantly reduce D-term noise, leading to cooler motors and a much smoother, "locked-in" flight feel.

Molded from premium-grade red silica gel, these absorbers offer the perfect Shore hardness to filter out mid-to-high frequency oscillations that can cause "jello" in your video feed or erratic flight behavior.

Key Highlights:

Precision Gyro Isolation: Specifically designed to fit standard M3 mounting holes, providing a clean, vibration-free platform for stackable flight controllers and ESCs.
Premium Silica Gel Construction: The durable yet flexible red silicone effectively dissipates energy, preventing mechanical "noise" from reaching your flight controller's sensors.
Compact M3x8mm Profile: Sized perfectly for tight racing drone builds (210mm–250mm) where vertical stack space is at a premium.
Enhanced Component Longevity: By absorbing the micro-shocks of flight and hard landings, these dampeners protect the delicate solder joints and SMD components on your PCBs.
High-Visibility Red: The vibrant red finish makes it easy to inspect your stack for wear while adding a professional, custom look to your build.

Technical Specifications

Feature	Details
Brand	Readytosky
Quantity	4 Pieces
Material	High-Grade Red Silica Gel
Thread Size	M3 (Standard)
Height	8mm
Application	Flight Controller / ESC Soft-Mounting
Compatibility	F3, F4, F7, and BLHeli_32 Stacks

Installation Pro-Tip:

When installing these, ensure your nuts or bolts are snug but not over-tightened. Crushing the silicone too much will limit its ability to flex and absorb vibrations, defeating the purpose of "soft-mounting." A firm, hand-tight fit is usually best for optimal dampening.

Partsbaba Quality Commitment: All Readytosky hardware is 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, ensuring your flight stack remains stable and secure from day one.

Only 19 items left

GPS Foldable Holder Bracket Stand Base Antenna Black for 7M 8N

From ₹ 316.49

₹ 274.68 each

ReadytoSky Foldable GPS Antenna Mount – Precision Stability for Long-Range UAVs

Protect your GPS signal and improve flight safety with the ReadytoSky Foldable GPS Bracket. Specifically designed to isolate your GPS module from the electromagnetic interference (EMI) generated by your drone's power distribution board and motors, this high-clearance stand ensures your flight controller achieves a faster, more stable satellite lock.

Crafted from a blend of lightweight aluminum and durable composite materials, this mount features a fold-down mechanism that allows for easy transport and storage without requiring you to disassemble your GPS wiring. It is the gold standard for APM, Pixhawk, and MultiWii builds where GPS accuracy is mission-critical.

Key Highlights:

Interference Reduction: By elevating your GPS/Magnetometer module away from high-current ESCs and motors, you significantly reduce "toilet bowling" and magnetic interference.
Universal Compatibility: Optimized for all standard GPS pucks, including the Ublox NEO-6M, M7N, M8N, and M10 series used in APM and Pixhawk ecosystems.
Rugged Foldable Design: The sturdy pivot joint allows the antenna to be folded flat against the frame during transit, then locked securely in an upright position for flight.
Precision CNC Components: Features a high-quality aluminum base and mounting plate for a vibration-free, secure attachment to your multirotor or quadcopter frame.
Lightweight Geometry: Engineered to provide maximum height and stability with minimal impact on your drone's overall takeoff weight.

Technical Specifications

Feature	Details
Brand	ReadytoSky
Material	CNC Aluminum & Carbon/Composite Rod
Design	Foldable / Collapsible
Compatibility	Ublox 6M, 7M, 8N, M10 & compatible GPS pucks
Application	APM, Pixhawk, MWC, and DJI-style builds
Color	Black

Pro-Builder Tip:

For the best results, use a small drop of blue thread-locker on the base mounting screws. This prevents the vibrations of the motors from loosening the bracket over time, ensuring your GPS stays perfectly level—which is vital for accurate "Position Hold" and "Auto Mission" modes!

Partsbaba Authenticity Guarantee: All ReadytoSky accessories supplied are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, helping you navigate with total confidence.

In stock