All Products

Gemfan 6042 Flash PC (3-Blade) – High-Thrust Cinematic & Racing Propellers

Experience the perfect fusion of power and stability with the Gemfan 6042 Flash 3-Blade propellers. While its 2-blade counterpart focuses on raw top speed, this tri-blade version is engineered for pilots who crave massive "grip" in the air. The additional blade provides increased surface area, resulting in smoother low-end throttle control, better braking, and exceptional stability during aggressive cornering.

Whether you are chasing fast-moving subjects for cinematic shots or competing on a technical racing track, the 6042 Flash delivers the high-pitch thrust needed to keep your 6-inch rig flying with absolute precision.

Key Highlights:

• Explosive Thrust: The combination of a 3-blade design and a 4.7-inch pitch offers incredible lift, giving you the "pop" needed for high-altitude recovers and rapid vertical climbs.

• Superior Grip & Control: Enjoy a more stable, "locked-in" feel. The extra blade helps eliminate prop wash and provides smoother handling in turbulent air.

• Robust PC Build: Manufactured from high-grade Polycarbonate, these props are designed to flex rather than shatter, surviving clipping gates or light branches.

• Balanced Performance: At 6.46g, these propellers provide enough weight to maintain momentum for smooth freestyle while remaining responsive enough for 2306-sized motors.

Technical Specifications

Partsbaba Promise: We guarantee that all propellers are 100% genuine and sourced directly to ensure quality. All purchases include a 14-day replacement warranty against manufacturing defects. Shop with confidence and keep your fleet in the air!

Readytosky XT60 Connector Pair (Male & Female) – High-Current Power Interface

Ensure a rock-solid power foundation for your FPV drone, RC aircraft, or DIY robotics project with the Readytosky XT60 Connector Set. Widely regarded as the industry standard for mid-to-high power applications, these connectors are engineered to provide a secure, low-resistance path between your LiPo battery and your Power Distribution Board (PDB) or ESC.

Molded from high-temperature nylon, the XT60 is designed to maintain its structural integrity even during high-heat soldering or intense current draws. The gold-plated spring connectors ensure maximum surface contact, preventing the voltage drops and loose connections that can lead to catastrophic flight failures.

Key Highlights:

• High-Amp Reliability: Engineered to handle over 60A of continuous current without overheating, making them the perfect match for powerful brushless motor setups.

• Heat-Resistant Nylon: The robust housing prevents the connector from melting or deforming during the soldering process or under heavy electrical loads.

• Non-Reversible Design: The asymmetrical shape prevents accidental reverse-polarity connections, protecting your expensive flight controllers and ESCs from short circuits.

• Gold-Plated Precision: Features premium gold-plating on the internal bullet connectors to minimize resistance and maximize electrical efficiency.

• Universal Compatibility: The "Must-Have" connector for 3S to 6S LiPo batteries and standard F450, 250mm, and racing drone frames.

Technical Specifications

Pro-Tip for Builders:

When soldering these connectors, it is always best to plug the male and female ends together first. This helps act as a heat sink and ensures the pins stay perfectly aligned even if the plastic softens slightly from the soldering iron.

Partsbaba Quality Commitment: All Readytosky connectors are 100% genuine and original. We provide a 14-day replacement warranty against manufacturing defects, ensuring your high-power connections are safe and reliable from day one.

Readytosky APM/Pixhawk Power Module – Precision Voltage & Current Sensing

Give your flight controller a clean, reliable "heartbeat" with the Readytosky Power Module. Specially designed for the APM 2.6, 2.8, and Pixhawk series, this module serves a dual purpose: it acts as a high-efficiency switching regulator to power your electronics and a high-precision sensor to monitor your battery’s health in real-time.

By integrating a 5.3V switching regulator and a 90A current sensor into a single XT60-equipped unit, this module eliminates the need for messy external BECs and voltage dividers. It allows your flight controller to trigger "Low Battery" failsafes and monitor live mAh consumption, ensuring you never push your LiPo packs too far.

Key Highlights:

• Dual-Function Design: Simultaneously regulates power to your flight controller while sending precise voltage and current data to your OSD or telemetry link.

• High-Voltage Support: Safely handles up to 28V (6S LiPo), making it compatible with everything from small 3S trainers to heavy-lift 6S endurance rigs.

• Plug-and-Play for ArduPilot: Features a standard 6-pin DF13 cable that plugs directly into the "PM" port of your APM or Pixhawk—no soldering or custom mapping required.

• Robust 3A Output: The switching regulator provides a stable 5.3V at up to 3A, offering plenty of overhead to power your FC, GPS, and low-power telemetry modules.

• Factory Protected: The unit comes pre-wrapped in high-quality transparent shrink tubing to prevent accidental shorts against carbon fiber frames.

Technical Specifications

Installation Note:

The Power Module is designed only to power the flight controller, a receiver, and low-power accessories (GPS, Telemetry). It is not intended to power servos. If your aircraft uses servos, please use a separate BEC or ESC to power the output rail of your flight controller.

Partsbaba Quality Commitment: All Readytosky power modules are 100% genuine. We offer a 14-day replacement warranty against manufacturing defects, so you can fly with the confidence that your power system is rock solid.

Readytosky DF13 6-Pin Flight Controller Cable (20cm) – Mission-Critical Data Link

Ensure flawless communication between your flight controller and high-bandwidth peripherals with the Readytosky DF13 6-Pin Cable. This 20cm data lead is a staple for professional-grade DIY drone builds, specifically designed to meet the high-density connection standards of the APM 2.6/2.8 and Pixhawk ecosystems.

Featuring the industry-standard Hirose DF13 series interface, this cable provides a secure, vibration-resistant latching mechanism. It is most commonly used for high-priority connections like GPS with integrated compass units, Telemetry radios, and Power Modules, where losing a single pin connection could mean the difference between a successful RTH (Return to Home) and a flyaway.

Key Highlights:

• Genuine Hirose-Style Interface: Utilizes the low-profile, 1.25mm pitch DF13 connector favored by ArduPilot and PX4 hardware for its reliability in high-vibration environments.

• 6-Pin Multi-Channel Support: The 6-wire configuration is perfectly mapped for combined GPS/Compass modules or full-feature Telemetry kits that require RX/TX, Power, Ground, and I2C lines.

• Perfectly Proportioned: At 20cm (200mm), this cable is long enough to reach from a centrally mounted flight controller to an elevated GPS mast on most 450mm to 650mm frames.

• High-Flex Silicone Wiring: The flexible internal wiring allows for tight routing through frame plates and around standoffs without putting undue stress on the flight controller's delicate vertical pins.

• Universal APM/Pixhawk Support: A direct "plug-and-play" replacement for the standard 6-pin cables included with original 3DR and Readytosky sensor kits.

Technical Specifications

Pro-Builder Tip:

The 6-pin DF13 is most commonly used for the Power Module port. Because this cable carries the voltage and current sensing data that your flight controller uses to trigger failsafes, always ensure the connector is fully seated and the wires are free from any tension or sharp bends.

Partsbaba Quality Assurance: We only supply 100% genuine Readytosky components. Every cable is backed by our 14-day replacement warranty against manufacturing defects, ensuring your drone's internal "nervous system" is reliable from the very first power-up.

Readytosky Pre-Soldered ESC Power Distribution Board (PDB) – Plug-and-Play Hub

Eliminate the hassle of complex soldering and messy wiring harnesses with the Readytosky Pre-Soldered ESC Power Distribution Board. Specifically designed for pilots who want a fast, reliable, and "tool-free" assembly experience, this PDB comes ready to use right out of the box. With high-quality connectors already professionally soldered, it serves as the centralized power hub for your quadcopter’s battery and speed controllers.

The board features a streamlined circular layout that fits perfectly in the center of most 250mm to 450mm frames, ensuring that power is distributed evenly to all four arms without the clutter of traditional wiring "octopuses."

Key Highlights:

• Plug-and-Play Setup: Comes pre-fitted with an XT60 Male plug for your battery and 3.5mm Banana Bullet connectors for your ESCs, saving you hours of soldering and heat-shrinking.

• Clean & Organized Layout: By centralizing your connections, this board significantly improves airflow through the frame and makes troubleshooting ESC issues much easier.

• Universal Frame Support: The mounting and connector layout are optimized for a wide range of drones, including the F450, QAV250, and QAV280 series.

• High-Current Copper Traces: Built on a thick PCB with high-conductivity copper to handle the heavy amp draws required during high-throttle maneuvers.

• Rugged Construction: Professional-grade solder joints ensure vibration resistance, a critical factor for long-term reliability in multirotor flight.

Technical Specifications

Installation Note:

To ensure a secure fit, double-check that your ESCs are equipped with matching 3.5mm male bullet connectors. If your ESCs have bare wires, simply solder 3.5mm male bullets to them for a completely modular, "snap-together" power system.

Partsbaba Quality Assurance: Every Readytosky power board we supply is 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can build your next project with total peace of mind.

Readytosky M3x8mm Anti-Vibration Standoffs (4-Piece Set) – High-Performance FC Soft-Mounting

Eliminate high-frequency noise and mechanical resonance with the Readytosky M3x8mm Anti-Vibration Dampeners. These specialized "soft-mount" standoffs are engineered to isolate your flight controller and sensitive IMU (gyroscope) from the vibrations generated by high-speed motors and unbalanced propellers. By decoupling the "brain" of your drone from the frame, these dampeners significantly reduce D-term noise, leading to cooler motors and a much smoother, "locked-in" flight feel.

Molded from premium-grade red silica gel, these absorbers offer the perfect Shore hardness to filter out mid-to-high frequency oscillations that can cause "jello" in your video feed or erratic flight behavior.

Key Highlights:

• Precision Gyro Isolation: Specifically designed to fit standard M3 mounting holes, providing a clean, vibration-free platform for stackable flight controllers and ESCs.

• Premium Silica Gel Construction: The durable yet flexible red silicone effectively dissipates energy, preventing mechanical "noise" from reaching your flight controller's sensors.

• Compact M3x8mm Profile: Sized perfectly for tight racing drone builds (210mm–250mm) where vertical stack space is at a premium.

• Enhanced Component Longevity: By absorbing the micro-shocks of flight and hard landings, these dampeners protect the delicate solder joints and SMD components on your PCBs.

• High-Visibility Red: The vibrant red finish makes it easy to inspect your stack for wear while adding a professional, custom look to your build.

Technical Specifications

Installation Pro-Tip:

When installing these, ensure your nuts or bolts are snug but not over-tightened. Crushing the silicone too much will limit its ability to flex and absorb vibrations, defeating the purpose of "soft-mounting." A firm, hand-tight fit is usually best for optimal dampening.

Partsbaba Quality Commitment: All Readytosky hardware is 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, ensuring your flight stack remains stable and secure from day one.

Matek PDB-XT60 with Dual BEC – Professional 5V & 12V Power Distribution Board

Streamline your drone build and ensure rock-solid power delivery with the Matek PDB-XT60. Engineered for high-current efficiency, this Power Distribution Board (PDB) acts as the central nervous system for your multirotor, distributing raw battery power to up to 6 ESCs while providing clean, regulated voltage for your sensitive electronics.

Built on a heavy-duty 4-layer 2oz copper PCB, the Matek PDB is designed to handle high amp draws without overheating. With an integrated XT60 socket and synchronized 5V/12V BECs, it eliminates "wire nests," reducing weight and improving the overall reliability of your FPV racer or cinema rig.

Key Highlights:

• High-Current Distribution: Designed to support 3S–4S LiPo inputs, providing stable power to 4 ESCs at 25A continuous (or 6 ESCs at 15A).

• Dual Synchronous BECs: Features a high-efficiency 5V (2A) output for flight controllers and receivers, plus a filtered 12V (500mA) output specifically for noise-free FPV video.

• Integrated XT60 Mounting: The PCB-mounted XT60 connector provides a secure, low-resistance battery connection, saving space and simplifying your frame layout.

• Visual Status Indicators: Dual onboard LEDs provide instant visual confirmation that your 5V and 12V regulators are functioning correctly.

• Short-Circuit Protection: Tolerant to brief short-circuits, protecting your expensive flight stack from accidental wiring mishaps during the build process.

• Clean Video Filtering: The 12V linear regulator is optimized to minimize "lines" in your FPV feed, ensuring a crystal-clear image for your camera and VTX.

Technical Specifications

Power Configuration Note:

• On 4S LiPo (14.8V): The 12V BEC provides a steady, regulated 12V output.

• On 3S LiPo (11.1V): The 12V output will follow the battery voltage minus approximately 1V (e.g., ~10.1V).

Pro-Builder Tip:

The Matek PDB-XT60 features standard 30.5mm x 30.5mm mounting holes, allowing you to stack it directly beneath your flight controller. To keep your video feed as clean as possible, use the dedicated VCC/GND pads for your high-power components and keep signal wires away from the high-current ESC traces!

Partsbaba Quality Guarantee: All Matek products supplied are 100% genuine. We offer a 14-day replacement warranty against manufacturing defects, so you can power up your next FPV project with complete peace of mind.

Gemfan 5x5E / 5x5R Glass Fiber Nylon Propeller Set (CW+CCW)

Product Description

The Gemfan 5x5 Vortex Electric Propeller Set is a high-durability solution designed for RC airplanes, flying wings, and electric-powered aircraft. This set includes both standard (E) and reverse (R) rotation propellers, making it ideal for twin-engine setups or counter-rotating systems that require balanced thrust and stability. Crafted from premium glass fiber reinforced nylon, these propellers offer significantly higher rigidity than standard plastic props, ensuring they maintain their aerodynamic shape even under high RPM and heavy blade loading. With strict dynamic balance control, this set minimizes motor vibration and maximizes power transfer for a smoother, more efficient flight experience.

Key Features

• Counter-Rotating Pair: Includes one standard and one reverse rotation propeller for perfectly balanced thrust in multi-engine aircraft.

• Glass Fiber Reinforced: Constructed from high-strength nylon reinforced with glass fiber for superior durability and stiffness.

• Precision Aerodynamics: Engineered with smooth wing profiles to reduce drag and optimize airflow for electric power systems.

• Low Vibration: Every prop undergoes strict dynamic balance testing to ensure stable flight and protect your motor bearings.

• Universal Fitment: Comes with a set of hole adapters (3mm, 4mm, 5mm, and 6mm) to ensure compatibility with various motor shaft sizes.

• High-Efficiency Pitch: The 5-inch pitch provides aggressive thrust and high-speed performance for racing and sport flying.

Technical Specifications

• Brand: Gemfan

• Propeller Diameter: 5 inch

• Pitch: 5 inch

• Material: Glass Fiber Reinforced Nylon

• Center Hole ID: 6.35mm (0.25in)

• Hole Adapters: 3mm, 4mm, 5mm, 6mm

• Center Thickness: 6mm

• Weight: 5.2g (per piece)

• Number of Blades: 2

• Color: Dark Grey

Package Includes

• 1 x 5x5E Standard Rotation Propeller

• 1 x 5x5R Reverse Rotation Propeller

• 1 x Set of Shaft Adapters

Warranty Information

All products supplied by Partsbaba are genuine and original. We offer a 14-day replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

Gemfan 8x6E / 8x6R Glass Fiber Nylon Propeller Set (CW+CCW)

Product Description

The Gemfan 8x6 Vortex Electric Propeller Set is a high-torque, high-efficiency solution designed for larger RC airplanes and electric-powered aircraft. This matched pair includes both standard (E) and reverse (R) rotation propellers, making it the perfect choice for twin-engine models or counter-rotating systems that require balanced torque and stabilized flight. Constructed from premium glass fiber reinforced nylon, these propellers are significantly stiffer than standard plastic, allowing them to maintain their 6-inch pitch even under heavy throttle loads. With precision dynamic balancing, this set ensures a smooth, low-vibration flight experience while maximizing the power output of your motor.

Key Features

• Matched Counter-Rotating Pair: Includes one 8x6E (Standard) and one 8x6R (Reverse) propeller for perfectly balanced thrust.

• Reinforced Nylon Material: Engineered with high-strength glass fiber reinforced nylon for maximum rigidity and impact resistance.

• High-Efficiency Pitch: The 8x6 profile provides excellent climb performance and higher cruising speeds for electric power systems.

• Vibration-Free Operation: Strictly tested for dynamic balance to protect motor bearings and ensure a stable flight platform.

• Universal Adapter System: Comes with a 6-hole adapter kit (3mm, 3.17mm, 4mm, 5mm, 6mm, and 8mm) to fit a wide variety of motor shafts.

• Heavy-Duty Hub: Features a 9.8mm center thickness and 19mm disk diameter for a secure, high-torque connection.

Technical Specifications

• Brand: Gemfan

• Propeller Diameter: 8 inch

• Pitch: 6 inch

• Material: Glass Fiber Reinforced Nylon

• Center Hole Diameter: 6.35mm (0.25 inch)

• Hole Adapters: 3mm, 3.17mm, 4mm, 5mm, 6mm, 8mm

• Center Thickness: 9.8mm

• Weight: 20.2g (per piece)

• Number of Blades: 2

• Color: Dark Grey

Package Includes

• 1 x 8x6E Standard Rotation Propeller

• 1 x 8x6R Reverse Rotation Propeller

• 1 x Set of Universal Shaft Adapters

Warranty Information

All products supplied by Partsbaba are genuine and original. We offer a 14-day replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.

Gemfan 4022F 4-Blade Propellers for DJI Flip – Clear Black (2 Pairs)

Product Description

The Gemfan 4022F Propeller Set is a precision-engineered propulsion upgrade specifically tailored for the DJI Flip drone system. Featuring a unique 4-blade configuration and a 4-inch diameter, these propellers are designed to provide a perfect harmony of high-static thrust, ultra-quiet operation, and exceptional flight stability. Crafted from high-rigidity Polycarbonate (PC), the 4022F series offers the stiffness required for rapid acceleration and responsive handling while remaining incredibly lightweight at just 0.37g per blade. Whether you are flying indoors or exploring outdoor environments, these propellers ensure a smooth, jello-free experience by minimizing motor vibrations and maximizing battery efficiency.

Key Features

• Tailored for DJI Flip: Custom-designed to match the motor output and flight controller tuning of the DJI Flip series for seamless compatibility.

• Quad-Blade Efficiency: The 4-blade design provides increased surface area for superior "grip" in the air, resulting in smoother hovering and tighter control.

• High-Rigidity Polycarbonate: Engineered from premium PC material to resist deformation under high RPM, ensuring consistent pitch and thrust.

• Silent Flight Profile: Optimized aerodynamics significantly reduce propeller noise, making it ideal for low-profile or indoor filming.

• Ultra-Lightweight Agility: At only 0.37g, these props reduce the moment of inertia, allowing the motors to react instantly to flight controller commands.

• Sleek Clear Black Finish: Provides a professional, modern aesthetic while maintaining excellent durability against wear and environmental heat.

Technical Specifications

• Brand: Gemfan

• Model: 4022F

• Propeller Diameter: 101.6mm (4 inch)

• Pitch: 2.2 inch

• Material: Polycarbonate (PC)

• Center Hole ID: 2.95mm

• Center Thickness: 2.55mm

• Max Prop Width: 12mm

• Weight: 0.37g (per piece)

• Number of Blades: 4

• Recommended Motor: DJI Flip System

• Color: Clear Black

Package Includes

• 4 x CW (Clockwise) Propellers

• 4 x CCW (Counter-Clockwise) Propellers

• (Total 8 Propellers / 2 Pairs)

Warranty Information

All products supplied by Partsbaba are genuine and original. We offer a 14-day replacement warranty in case of manufacturing defects. For more details, please visit our cancellation and returns page.