Visa

FPV Drone Propeller 3016 Hurricane 3 Blade 1.5mm Shaft Pitch 1.5" (2 Pair CW+CCW)

₹ 343.00 ₹ 549.00

-38%

Gemfan Hurricane 3016 Tri-Blade Propellers – Optimized Efficiency for 3-Inch Micros

Take your micro-drone performance to the next level with the Gemfan Hurricane 3016. Specifically designed for ultralight 3-inch "Toothpick" builds and specialized racing quads, these propellers offer an exceptional balance of low-end torque and high-speed efficiency. The 1.6-inch pitch is engineered to provide a smooth, linear throttle response, making them the perfect choice for pilots who prioritize "floaty" freestyle maneuvers and precise proximity flying.

Molded from high-tenacity Polycarbonate (PC), the Hurricane 3016 is built to maintain its aerodynamic profile under high-RPM stress while remaining resilient enough to survive minor tumbles and gate clips.

Key Highlights:

High-Efficiency Blade Profile: The 3-blade design provides a smoother flight characteristic and quieter operation compared to bi-blade props, without the excessive amp draw of 4-blade alternatives.
Ultralight 1.18g Design: At just over one gram per propeller, these blades minimize rotational mass, allowing your motors to react instantly to flight controller corrections for a "locked-in" feel.
Micro-Motor Optimization: Featuring a 1.5mm 3-hole T-mount, these props are the ideal match for high-performance 1108 to 1303 series brushless motors.
Tough Polycarbonate Build: Crafted from impact-resistant PC material that balances stiffness for flight performance with flexibility for durability.
Sleek Color Options: Available in Clear Gray and Blue, allowing you to customize your drone’s look while maintaining high visibility during flight.

Technical Specifications

Feature	Details
Brand	Gemfan
Model	Hurricane 3016
Prop Disk Diameter	76.5mm (3.0 in)
Pitch	1.6 in
Blades	3 (Tri-Blade)
Material	Polycarbonate (PC)
Mount (Shaft)	1.5mm (3-Hole T-Mount)
Center Thickness	5.5mm
Weight	1.18g
Recommended Motor	1303 (5000KV) / 1108–1306

Pro-Builder Tip:

The Hurricane 3016 is a favorite for 1S and 2S 3-inch Toothpick builds. Because of its relatively low pitch, it is incredibly efficient, often extending flight times by 20–30 seconds compared to more aggressive 3-inch props. It’s the go-to choice for a "stealthy" and long-range micro setup!

Partsbaba Authenticity Guarantee: All Gemfan Hurricane propellers supplied are 100% genuine and original. Your purchase is protected by our 14-day replacement warranty against manufacturing defects, ensuring your micro-flight experience is mission-ready.

Out of stock

FPV Drone Propeller 2023S Hurricane 3 Blade 1.5mm Shaft Pitch 2" (4 Pair CW+CCW)

₹ 322.83 ₹ 605.00

-47%

Gemfan Hurricane 2023S Tri-Blade Propellers – Ultralight 2-Inch Racing Performance

Elevate your micro-quad’s agility with the Gemfan Hurricane 2023S. Specifically engineered for high-performance 2-inch "Toothpick" builds and micro-racers, these propellers offer an exceptional balance of thrust and efficiency. The 2-inch pitch provides a smooth, linear power curve, making it the ideal choice for pilots who need precise throttle control during technical indoor maneuvers or high-speed backyard racing.

Molded from premium, impact-resistant Polycarbonate (PC), the 2023S is designed to be incredibly lightweight at just 0.7g. This low rotational mass allows your motors to react instantly to PID adjustments, resulting in a "locked-in" flight feel and reduced prop-wash oscillations.

Key Highlights:

Optimized Micro Geometry: The 50.8mm disk diameter is tailored for 2-inch frames, providing maximum surface area for lift without overloading micro-sized brushless motors.
Responsive Tri-Blade Design: Offers a smoother flight characteristic and better "grip" in corners compared to bi-blade propellers, all while maintaining high-end efficiency.
Ultralight 0.7g Profile: Minimizes motor strain and maximizes battery life, allowing for rapid acceleration and snappy recoveries from dives.
Precision 1.5mm Mount: Designed for a secure, press-fit or T-mount compatible interface with high-KV micro motors like the 1105 5500KV series.
Durable PC Material: Built to survive the rigors of FPV racing, the high-quality polycarbonate construction resists shattering during minor impacts.

Technical Specifications

Feature	Details
Brand	Gemfan
Model	Hurricane 2023S
Prop Disk Diameter	2.0 in (50.8mm)
Pitch	2.0 in
Blades	3 (Tri-Blade)
Material	Polycarbonate (PC)
Mount (Shaft)	1.5mm
Center Thickness	4.8mm
Weight	0.7g
Recommended Motor	1105 (5500KV) / 1103–1204

Pro-Builder Tip:

The Hurricane 2023S is a fantastic "all-rounder." If you find that aggressive 2.3-pitch props are making your motors too hot or causing mid-throttle vibrations, switching to the 2.0-pitch 2023S will often smooth out your tune and increase your flight time by 15–20%!

Partsbaba Authenticity Guarantee: All Gemfan products we supply are 100% genuine and original. Your purchase is backed by our 14-day replacement warranty against manufacturing defects, ensuring your micro-drone is always ready for the next heat.

In stock

FPV Drone Propeller 1507 Glass Fiber Nylon 3 Blade 6mm Shaft Pitch 7" Black (1 Pair CW+CCW)

₹ 1,754.67 ₹ 3,606.00

-51%

Gemfan 1507-3 Glass Fiber Nylon Propellers – Heavy-Lift Industrial Power

Step up to industrial-grade performance with the Gemfan 1507-3. Specifically engineered for large-wheelbase multirotors and heavy-lift FPV platforms, these massive 15-inch tri-blade propellers are built to move serious weight with absolute stability. Unlike smaller hobby props, the 1507 series is crafted from Glass Fiber Reinforced Nylon, providing the extreme stiffness required to prevent blade deforming under the immense torque of large-stator motors.

With a 7-inch pitch and a robust 3-blade configuration, these propellers deliver incredible "grip" in the air, making them the ideal choice for cinema rigs carrying heavy gimbal stabilized cameras or industrial drones requiring precise hovering and heavy payload capacity.

Key Highlights:

High-Torque Performance: The tri-blade design provides significantly more thrust than standard bi-blades, allowing for shorter takeoff distances and better altitude hold for heavy-lift rigs.
Glass Fiber Nylon Construction: The composite material offers superior structural rigidity compared to standard plastics, ensuring the blades maintain their aerodynamic profile even at high RPM.
Large-Scale Compatibility: Optimized for high-torque motors like the 4218 series and larger, providing the thermal and mechanical efficiency needed for long-endurance flights.
Versatile Mounting: Features a 6mm center bore and includes a set of adapters, ensuring a secure and centered fit on various heavy-duty motor shafts.
Reduced Vibration: Gemfan’s precision molding and high-density material result in a naturally balanced prop, protecting your sensitive flight controller and camera gear from mechanical noise.

Technical Specifications

Feature	Details
Brand	Gemfan
Model	1507-3 (15 Inch)
Prop Disk Diameter	381mm (15.0 in)
Pitch	7.0 in
Blades	3 (Tri-Blade)
Material	Glass Fiber Reinforced Nylon
Mount (Shaft)	6mm (Adapters Included)
Center Thickness	12.2mm
Weight	68g
Recommended Motor	4218 / 5010 / 5212 Series

Pro-Builder Tip:

The 1507-3 is a "high-authority" propeller. If you are building a X8 Coaxial or a Heavy-Lift Hexacopter, these props provide excellent cooling for your motors due to the high-volume airflow. Always ensure your ESCs are calibrated for the high rotational inertia of a 68g glass-fiber propeller to maintain snappy motor response!

Partsbaba Authenticity Guarantee: All Gemfan industrial propellers are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can deploy your professional-grade platforms with total confidence.

Out of stock

FT6560M - 7.4V 60kg 210deg Digital Servo Motor

₹ 4,716.00 ₹ 7,546.00

-38%

Feetech FT6560M Giant Scale Digital Servo – 60kg.cm Ultra-High Torque

Command extreme power with the Feetech FT6560M, a giant-scale digital servo engineered for the most demanding RC and industrial robotics applications. Delivering a massive peak stall torque of up to 60kg.cm (at high voltage), this servo is the ultimate solution for 1/5 scale vehicles, large-scale UAV control surfaces, and heavy-duty robotic actuators.

The FT6560M features a hybrid Aluminium and Engineering Plastic case to provide superior heat dissipation and structural rigidity. Inside, a full Metal Gear drivetrain supported by dual ball bearings ensures that every ounce of torque is delivered with precision and minimal mechanical play.

Key Highlights:

Industrial-Grade Torque: Capable of handling loads up to 60kg.cm, providing the raw strength needed for steering heavy-duty RC trucks or moving large robotic limbs.
Reinforced Metal Drivetrain: Equipped with high-strength metal gears to prevent stripping under extreme stress, ensuring long-term reliability in high-impact environments.
Advanced Hybrid Housing: The CNC-machined aluminium center section acts as a heatsink to keep the motor cool during prolonged use, while high-grade engineering plastics keep the overall weight optimized.
Extended 210° Motion: Offers a generous 210° limit angle, providing significantly more mechanical range than standard servos for specialized linkages and wide-angle articulation.
High-Voltage Compatibility: Supports a wide 4V to 8.4V range, allowing you to run directly from a 2S LiPo battery for maximum speed and holding power.
Precision Digital Control: Features a high-resolution digital comparator for lightning-fast response times and an incredible "locked-in" centering accuracy.

Technical Specifications

Feature	Details
Brand	Feetech
Model	FT6560M
Dimensions	65.8mm x 30.0mm x 57.4mm
Weight	200g ±0.2
Gear Type	Full Metal Gear
Stall Torque (@7.4V/8.4V)	Up to 60 kg.cm
No Load Speed	0.15 sec/60°
Operating Voltage	4.0V – 8.4V
Bearing Type	Dual Ball Bearings
Spline Count	15T
Case Material	Aluminium & Engineering Plastic

Pro-Builder Tip:

The FT6560M is a high-current device with a stall current of 2400mA. When using this in a giant-scale RC car or a large robot, ensure your power distribution board or BEC is capable of handling high burst currents to prevent voltage drops that could affect your receiver or flight controller.

Partsbaba Quality Commitment: All Feetech digital servos are 100% genuine and original. We provide a 14-day replacement warranty against manufacturing defects, so you can build your heavy-duty projects with absolute confidence.

Out of stock

FT995M-C001 - 95KG 180deg Digital Servo Motor

₹ 7,661.00 ₹ 12,258.00

-38%

Feetech FT995M-C001 Ultra-Torque Digital Servo – 105kg.cm Steel Gear Powerhouse

When standard servos reach their mechanical limits, the Feetech FT995M-C001 takes over. This industrial-grade digital servo is a true heavyweight, delivering a staggering peak stall torque of 105kg.cm at 8.4V. Engineered for large-scale RC platforms, heavy-lift UAVs, and advanced robotics, it provides the massive structural strength and holding power required to move significant loads with surgical precision.

Built to endure extreme mechanical stress, the FT995M-C001 features a full Steel Gear drivetrain and a reinforced Aluminium & Engineering Plastic case for optimal heat dissipation. Supported by high-precision ball bearings, this servo ensures smooth, jitter-free performance even when operating at the edge of its performance envelope.

Key Highlights:

Extreme Torque Output: With 105kg.cm of peak torque, this is one of the most powerful servos in its class, ideal for giant-scale steering, sail winches, and robotic lifting arms.
Full Steel Drivetrain: The high-tensile steel gears are designed to resist stripping and wear under the massive 10.5A stall currents, ensuring long-term reliability.
High-Voltage Capability: Optimized for a 6V to 9V range, allowing for direct integration with 2S LiPo or high-output power systems for maximum speed and response.
180° Precision Motion: Offers a wide and accurate travel range (at 500→2500μsec) with a digital comparator system for superior centering and holding power.
Robust Hybrid Housing: The CNC-machined aluminium center section acts as a vital heatsink, protecting the motor and electronics during high-duty cycles.
Heavy-Duty 15T Spline: Features a reinforced 15T/7.6mm output spline to ensure a secure, slip-free connection with high-torque servo horns.

Technical Specifications

Feature	Details
Brand	Feetech
Model	FT995M-C001
Dimensions	65mm x 30mm x 48mm
Weight	187.5g ± 1g
Gear Type	Full Steel Gear
Peak Stall Torque	105 kg.cm @ 8.4V
Stall Current	10.5A @ 8.4V
No Load Speed	0.25 sec/60° (40 RPM) @ 8.4V
Operating Voltage	6.0V – 9.0V
Bearing Type	Dual Ball Bearings
Rotation Angle	180° ± 5°

Pro-Builder Tip:

The FT995M-C001 is a power-hungry beast with a 10.5A stall current. To prevent "brownouts" or damage to your electronics, do not power this servo directly through a standard receiver bus. We highly recommend using a dedicated high-current power distribution board or a robust external BEC capable of handling 12A+ bursts.

Partsbaba Quality Commitment: All Feetech digital servos are 100% genuine and original. We provide a 14-day replacement warranty against manufacturing defects, giving you the confidence to power your most ambitious projects.

Out of stock

FT935BL - 7.4V 35Kg 180deg Brushless Servo Motor IP54

₹ 10,787.00 ₹ 17,259.00

-37%

Feetech FT935BL High-Performance Brushless Digital Servo – 35kg.cm Titanium Gear Power

Experience the pinnacle of servo technology with the Feetech FT935BL. Engineered for professional RC racers and advanced robotics, this servo replaces traditional brushed motors with a high-efficiency Brushless Motor. This upgrade provides faster response times, significantly lower heat generation, and a vastly extended operational lifespan. Delivering a massive 35kg.cm of torque (at 7.4V), the FT935BL is designed to handle extreme loads without fading under pressure.

Housed in a full CNC Aluminum Alloy case, the FT935BL offers superior heat dissipation and structural rigidity. The internal drivetrain features ultra-tough Titanium/Metal gears supported by precision dual ball bearings, ensuring "slop-free" performance and the durability required for high-impact environments.

Key Highlights:

Advanced Brushless Technology: Offers higher torque-to-weight ratios and faster speeds than coreless or brushed servos, with much higher resistance to wear.
Heavy-Duty Titanium Drivetrain: Equipped with premium metal gears to withstand massive shock loads, making it ideal for 1/8 scale steering and heavy-duty robotic joints.
Full Aluminum Heat-Sink Case: The all-metal housing ensures the internal electronics stay cool during intense competition or continuous industrial cycles.
High-Voltage Ready: Optimized for a 6V to 9V range, allowing for a direct 2S LiPo connection to unlock its maximum 35kg.cm potential.
Lightning-Fast Response: Boasting a no-load speed of 0.111sec/60°, this servo provides the near-instantaneous corrections needed for high-speed racing.
Professional 24T Spline: Includes a high-quality Aluminum servo horn that fits the 24T/5.75mm output shaft for a rock-solid mechanical connection.

Technical Specifications

Feature	Details
Brand	Feetech
Model	FT935BL
Dimensions	40.0mm x 20.0mm x 36.7mm
Weight	73g ± 1g
Motor Type	Brushless
Gear Type	Metal / Titanium
Stall Torque (@7.4V)	35 kg.cm
No Load Speed (@7.4V)	0.111 sec/60°
Operating Voltage	6.0V – 9.0V
Case Material	Aluminum Alloy
Rotation Angle	180°

Pro-Builder Tip:

The FT935BL is a performance beast, but keep an eye on its 5.5A stall current. To ensure the brushless motor maintains its lightning-fast response, we recommend using high-quality, heavy-gauge wiring and a robust power source that won't sag during high-torque maneuvers.

Partsbaba Quality Commitment: All Feetech brushless servos are 100% genuine and original. We provide a 14-day replacement warranty against manufacturing defects, so you can push your high-end builds to the limit with total peace of mind.

Out of stock

Pixhawk 2.4.8 Set, PX4/APM Flight Controller

₹ 15,181.00 ₹ 21,814.00

-30%

Pixhawk 2.4.8 (APM 2.8 Combo) Flight Controller Set – Professional UAV Navigation Stack

Unlock advanced autonomous capabilities with the Pixhawk 2.4.8 Flight Control System. This comprehensive combo set is the industry standard for hobbyists, researchers, and professional drone builders who require a reliable, open-source ecosystem for UAV projects. Powered by a high-performance 32-bit ARM Cortex M4 processor, the Pixhawk 2.4.8 offers a significant leap in processing power and sensor reliability over traditional flight controllers, supporting advanced real-time operating systems (NuttX) and complex flight stacks like ArduPilot and PX4.

Whether you are building a long-range survey drone, an autonomous rover, or a heavy-lift multicopter, this set provides the redundant power systems and fail-safe mechanisms necessary for mission-critical operations.

Key Highlights:

Advanced Processing Power: Features the STM32F427 Cortex M4 (168MHz) with a hardware floating-point unit and 256K RAM, ensuring smooth handling of complex navigation algorithms.
Redundant Sensor Suite: Equipped with a 6-axis accelerometer/gyroscope, magnetometer, and a high-precision barometer for rock-solid altitude hold and GPS-assisted flight.
Extensive I/O Support: Includes 14 PWM/Servo outputs and dedicated ports for UART, I2C, SPI, CAN, and SBUS, allowing for seamless integration of GPS, telemetry, and payload gimbals.
Mission Safety & Fail-Safes: Integrated backup controller and dual power inputs ensure that your aircraft stays protected in the event of a primary system failure.
Data-Driven Analysis: Features an onboard Micro SD slot for real-time high-speed flight data logging, essential for post-flight tuning and troubleshooting.
Ready-to-Fly Combo: This "Full Combo" includes everything from the shock absorber mount to the power module, eliminating compatibility guesswork.

Technical Specifications

Feature	Details
Main Processor	32-bit STM32F427 Cortex M4 (168MHz)
Backup Processor	STM32F103 fail-safe co-processor
Memory	2MB Flash / 256KB RAM
Sensors	L3GD20 Gyro / LSM303D Accel-Mag / MPU6000 / MS5611 Baro
Interfaces	5x UART, 2x CAN, I2C, SPI, 3.3 & 6.6V ADC
Power Input	Redundant power supply compatible (via Power Module)
Mounting	Includes anti-vibration shock mount

Comprehensive Packing List:

1x Pixhawk 2.4.8 Flight Controller
1x Power Module (with XT60 connectors)
1x Vibration Damper/Shock Mount
1x Safety Switch & External Buzzer
1x I2C Expansion Board & RGB Connector
1x PPM Encoder (for PWM receiver compatibility)
1x SD Card (Pre-installed for logging)

Pro-Builder Tip:

The Pixhawk 2.4.8 is a "Current-Sensing" powerhouse. When setting up your Power Module in Mission Planner, ensure you calibrate the voltage and current sensors. This allows the Pixhawk to trigger an automatic "Return to Launch" (RTL) if your battery drops below a specific percentage, potentially saving your expensive UAV from a crash!

Partsbaba Authenticity Guarantee: All ReadytoSky Pixhawk components are 100% genuine. We offer a 14-day replacement warranty against manufacturing defects, ensuring your autonomous project starts on solid ground.

In stock

GPS Foldable Holder Bracket Stand Base Antenna Black for 7M 8N

₹ 258.00 ₹ 413.00

-38%

ReadytoSky Foldable GPS Antenna Mount – Precision Stability for Long-Range UAVs

Protect your GPS signal and improve flight safety with the ReadytoSky Foldable GPS Bracket. Specifically designed to isolate your GPS module from the electromagnetic interference (EMI) generated by your drone's power distribution board and motors, this high-clearance stand ensures your flight controller achieves a faster, more stable satellite lock.

Crafted from a blend of lightweight aluminum and durable composite materials, this mount features a fold-down mechanism that allows for easy transport and storage without requiring you to disassemble your GPS wiring. It is the gold standard for APM, Pixhawk, and MultiWii builds where GPS accuracy is mission-critical.

Key Highlights:

Interference Reduction: By elevating your GPS/Magnetometer module away from high-current ESCs and motors, you significantly reduce "toilet bowling" and magnetic interference.
Universal Compatibility: Optimized for all standard GPS pucks, including the Ublox NEO-6M, M7N, M8N, and M10 series used in APM and Pixhawk ecosystems.
Rugged Foldable Design: The sturdy pivot joint allows the antenna to be folded flat against the frame during transit, then locked securely in an upright position for flight.
Precision CNC Components: Features a high-quality aluminum base and mounting plate for a vibration-free, secure attachment to your multirotor or quadcopter frame.
Lightweight Geometry: Engineered to provide maximum height and stability with minimal impact on your drone's overall takeoff weight.

Technical Specifications

Feature	Details
Brand	ReadytoSky
Material	CNC Aluminum & Carbon/Composite Rod
Design	Foldable / Collapsible
Compatibility	Ublox 6M, 7M, 8N, M10 & compatible GPS pucks
Application	APM, Pixhawk, MWC, and DJI-style builds
Color	Black

Pro-Builder Tip:

For the best results, use a small drop of blue thread-locker on the base mounting screws. This prevents the vibrations of the motors from loosening the bracket over time, ensuring your GPS stays perfectly level—which is vital for accurate "Position Hold" and "Auto Mission" modes!

Partsbaba Authenticity Guarantee: All ReadytoSky accessories supplied are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, helping you navigate with total confidence.

In stock

Plastic GPS Antenna Foldable Mount Holder

₹ 130.41 ₹ 232.00

-44%

ReadytoSky Lightweight Foldable GPS Mount – High-Clearance Antenna Support

Optimize your drone's GPS performance with the ReadytoSky Ultralight Foldable Antenna Mount. Specifically engineered for FPV racers, Toothpick builds, and compact quadcopters like the QAV250, this mount is the perfect solution for pilots looking to elevate their GPS puck away from electrical noise without adding significant bulk.

By positioning your GPS module above the carbon fiber frame and high-current electronics, you significantly reduce interference, leading to faster satellite acquisition and a more reliable "Return to Home" (RTH) failsafe. The 13cm height ensures the antenna clears top-mounted batteries, while the foldable pivot allows you to collapse the stand for easy transport in a backpack.

Key Highlights:

Ultralight 8g Profile: At just 8 grams, this mount is designed for weight-sensitive builds, providing the benefits of a high-gain antenna position without sacrificing flight agility.
Interference Isolation: Elevates your GPS/Magnetometer away from the "EMI-noisy" zone of the ESCs and motors, which is critical for accurate GPS-hold and navigation modes.
Durable Engineering Plastic: Crafted from high-impact composite plastic that is rigid enough to hold its position in flight but flexible enough to absorb vibrations and minor impact energy.
Space-Efficient Foldable Joint: Features a simple, secure folding mechanism that allows the antenna to lie flat against the frame during transport, preventing the mast from snapping.
Universal Frame Compatibility: Designed to mount easily to any standard carbon fiber top plate using just two screws, making it a "plug-and-play" upgrade for DIY drone projects.

Technical Specifications

Feature	Details
Brand	ReadytoSky
Material	High-Quality Composite Plastic
Height	13cm (Extended)
Diameter	3cm (Mounting Base)
Weight	8.0g
Design	Single-Pivot Foldable
Compatibility	QAV250, 5" FPV Freestylers, 7" Long Range

Pro-Builder Tip:

For the best satellite lock, always ensure your GPS module is mounted level on the top plate of the bracket. If you are flying an FPV drone with a high camera tilt, the foldable design allows you to slightly offset the mast to ensure the antenna stays pointing toward the sky while the drone is in forward flight!

Partsbaba Authenticity Guarantee: All ReadytoSky accessories are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, ensuring your drone's navigation system remains rock-solid.

In stock

PPM Encoder V1.3 with Case

₹ 748.00 ₹ 1,197.00

-38%

ReadytoSky PPM Encoder V1.3 – High-Precision PWM to PPM Signal Converter

Simplify your flight controller wiring and resolve receiver compatibility issues with the ReadytoSky PPM Encoder V1.3. This essential module is designed for pilots using older PWM receivers (which use one wire per channel) with modern flight controllers like Pixhawk, APM, or Paparazzi that require a single-wire PPM input.

By encoding up to 8 individual PWM channels into a single, streamlined PPM composite signal, this encoder significantly reduces "cable clutter" and frees up valuable I/O ports on your autopilot. Housed in a protective plastic case, the V1.3 is pre-flashed and mission-ready out of the box.

Key Highlights:

8-Channel Signal Aggregation: Capable of reading up to 8 individual PWM input channels and merging them into one precise PPM output stream.
Plug-and-Play Firmware: Comes pre-flashed with the latest stable firmware, requiring no complex software setup for standard UAV operations.
Programmable & Customizable: Advanced users can re-flash the onboard ATmega328P via an AVR ISP programmer to invert PPM signals or adjust specific fail-safe values.
Protective Hard Case: Includes a durable, lightweight enclosure that shields the sensitive electronics from dust, moisture, and mechanical stress during flight.
Broad Autopilot Support: The industry-standard solution for connecting PWM-only receivers to Pixhawk 2.4.8, APM 2.8, and other modern 32-bit flight stacks.
Low Latency Conversion: High-speed processing ensures that your control inputs remain responsive with minimal signal delay.

Technical Specifications

Feature	Details
Brand	ReadytoSky
Model	PPM Encoder V1.3
Processor	ATmega328P
Input Channels	8 PWM Channels
Output	Single PPM Composite
Firmware	Pre-flashed (v2.3.16 or compatible)
Case Material	High-Grade Plastic
Dimensions	28mm x 27mm x 9mm (with case)

What’s in the Box:

1x PPM Encoder Module (with Case)
1x 10-pin Input Cable (PWM side)
1x 3-pin Output Cable (PPM side)

Pro-Builder Tip:

If you are transitioning to an autonomous flight stack like ArduPilot, using a PPM encoder is the most reliable way to maintain your current RC transmitter setup. Ensure that your receiver is powered through the encoder's input rail, and double-check your channel mapping in Mission Planner after the first connection to ensure all 8 channels are moving correctly!

Partsbaba Authenticity Guarantee: All ReadytoSky electronics are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can integrate this encoder into your UAV with complete confidence.

In stock

I2C Splitter

₹ 256.47 ₹ 406.00

-37%

ReadytoSky I2C Splitter Hub with Cable – Essential Pixhawk/APM Expansion

Maximize the peripheral capacity of your flight stack with the ReadytoSky I2C Splitter Hub. Standard flight controllers like the Pixhawk or APM often come with a limited number of I2C ports, which can become a bottleneck when adding advanced sensors. This bus expansion module acts as a high-speed "power strip" for your data, allowing you to connect up to four additional I2C devices—such as external compasses, digital airspeed sensors, LED modules, or specialized laser rangefinders—using only a single port on your flight controller.

Crafted for reliability in high-vibration environments, the ReadytoSky splitter ensures stable data transmission across all connected nodes, making it a critical component for professional UAV builds and complex autonomous platforms.

Key Highlights:

4-Way Port Expansion: Instantly converts one I2C port into four, enabling the simultaneous use of multiple external sensors and accessories.
Seamless Compatibility: Designed specifically for the Pixhawk (2.4.6/2.4.8) and APM 2.8 ecosystems, utilizing standard 4-pin JST-GH or DF13 style connections.
Plug-and-Play Installation: Includes a pre-terminated 4-wire cable, allowing for immediate integration without the need for custom soldering or wiring harnesses.
Ultralight & Compact: Measuring just 37mm x 18.3mm, this hub fits easily into tight frames and adds negligible weight to your aircraft's takeoff profile.
Robust Data Bus: Features a high-quality PCB that maintains signal integrity across all four ports, preventing sensor dropouts during critical flight maneuvers.

Technical Specifications

Feature	Details
Brand	ReadytoSky
Interface Type	I2C (Inter-Integrated Circuit)
Ports	1 Input → 4 Outputs
Dimensions	37mm x 18.3mm x 9mm
Included Cable	4-Wire I2C Connector
Compatibility	Pixhawk 2.4.8, APM 2.8, PX4, and Arduino

Pro-Builder Tip:

When connecting multiple high-draw I2C peripherals (like high-brightness RGB LED boards), ensure your Flight Controller’s internal regulator can handle the cumulative current. For complex setups with an airspeed sensor and external GPS/Compass, the ReadytoSky Splitter is the cleanest way to keep your wiring loom organized and "pro-tier" in appearance!

Partsbaba Quality Commitment: All ReadytoSky accessories are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can expand your autonomous system with total peace of mind.

Low in stock

Mini 5V Lost Buzzer with JST Female Plug

₹ 111.86 ₹ 171.00

-35%

ReadytoSky Mini 5V Lost Model Buzzer – High-Decibel Recovery Alarm

Never lose track of your aircraft again with the ReadytoSky Mini 5V Lost Model Buzzer. This compact, high-output audible alarm is the ultimate insurance policy for FPV drones, fixed-wing planes, and RC vehicles. Designed to trigger a loud, piercing alert during a signal loss or a crash, this buzzer helps you locate your model in tall grass, thick brush, or out-of-sight landing zones.

Equipped with a pre-soldered JST Female Plug, this buzzer offers a true plug-and-play solution for flight controllers and power distribution boards. Its ultralight footprint makes it an essential addition to even the smallest micro-quads, where every gram counts.

Key Highlights:

High-Decibel Alert: Engineered to produce a sharp, clear tone that cuts through ambient noise, making it significantly easier to recover "lost" models.
Plug-and-Play JST Connector: Features a standard JST female plug for a secure, solder-free connection to compatible pins on your flight stack or receiver.
Ultralight & Compact: Small enough to be tucked into tight frames or taped to an arm without affecting the flight dynamics or center of gravity of your drone.
Low-Power Efficiency: Optimized to run on a standard 5V rail, ensuring it won't drain your flight battery while providing maximum volume.
Multi-Purpose Functionality: Can be configured via Betaflight, INAV, or ArduPilot to act as a low-battery warning, a lost-model alarm, or a status indicator (arming/disarming).

Technical Specifications

Feature	Details
Brand	ReadytoSky
Operating Voltage	5V DC
Connector Type	JST Female Plug
Sound Output	High-Decibel Active Piezo
Dimensions	Approx. 9mm x 5.5mm (Buzzer unit)
Compatibility	Drones, RC Cars, Boats, and Arduino Projects
Application	Lost Model Alarm / Low Battery Warning

Pro-Builder Tip:

To get the most out of your buzzer in Betaflight, head to the "Configuration" tab and ensure "Beeper" is enabled. You can then assign a specific switch on your transmitter to the BEEPER mode in the "Modes" tab. If you ever go down in high weeds, just flip the switch to activate a constant "SOS" tone for easy recovery!

Partsbaba Quality Commitment: All ReadytoSky components are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can fly with the confidence that you'll always find your way home.

Are you installing this on a racing drone for crash recovery, or are you looking to use it as a low-voltage alarm for a DIY electronics project?

In stock

40A 2-6S Multi-Rotor UAV Drone ESC

₹ 869.00 ₹ 1,706.00

-49%

In stock

Mini 12V 3A UBEC Input 4S-6S

₹ 281.00 ₹ 450.00

-38%

In stock

1200TVL HD COMS FPV Camera 2.8mm Lens PAL

₹ 1,589.00 ₹ 2,542.00

-37%

ReadytoSky 1200TVL HD FPV Camera 2.8mm – High Clarity Vision for FPV Drones

Upgrade your drone’s visual performance with the ReadytoSky 1200TVL HD FPV Camera, built for sharp imaging, low-light clarity, and reliable real-time video transmission. Designed for FPV drones and quadcopters, this compact camera delivers detailed footage and stable performance across various flying conditions.

With advanced image processing features like D-WDR and 2D Noise Reduction, you get balanced exposure and reduced noise, ensuring a clear view whether you're flying in bright sunlight or low-light environments. Its lightweight and compact design makes it perfect for both racing drones and aerial hobby builds.

Key Features:

High-Resolution Output: Up to 1200TVL clarity with a 2.8mm lens for sharp, detailed FPV footage.
Excellent Low-Light Performance: Minimum illumination of 0.01 Lux ensures visibility even in dim conditions.
Advanced Image Processing: D-WDR and 2DNR enhance contrast and reduce noise for smoother video quality.
Auto Light Adjustment: Equipped with Auto Gain Control (AGC) and Backlight Compensation (BLC) for consistent exposure.
Compact & Lightweight: Weighs only 12g with a 26 x 26 mm form factor—ideal for easy drone integration.
Day/Night Support: Automatically adapts between color and black & white modes based on lighting.

Technical Specifications:

Brand: ReadytoSky
Image Sensor: 1/4" or 1/3" CMOS SUPER HAD II
Horizontal Resolution: 700TVL / 1200TVL
Lens: 2.8mm
Signal System: PAL
S/N Ratio: >60dB (AGC OFF)
Electronic Shutter: PAL: 1/50 – 1/100,000
AGC: Yes
BLC: Yes
Minimum Illumination: 0.01 Lux / F1.2
WDR: D-WDR
DNR: 2DNR
Day/Night Mode: Auto / Color / B&W
Power Supply: DC 12V
Weight: 12g
Dimensions: 26 x 26 x 30 mm

Warranty:
All products sold by PartsBaba are 100% genuine and original. We provide a 14-day replacement warranty in case of manufacturing defects. Please refer to our Cancellation & Returns page for more details.

Get a clearer, more responsive FPV experience with the ReadytoSky 1200TVL Camera—built for precision flying and dependable performance.

Out of stock