Visa

1pc Dumping Rubber for APM PIX Glass Fiber Shock Absorber Blue

₹ 25.00 ₹ 63.00

-60%

In stock

Amass 1-6S 30V XT30 / XT60 Fuse Installation Test Safety Plug

₹ 602.00 ₹ 861.00

-30%

Product Description

The Amass XT30 1–6S (30V) Fuse Installation Test Safety Plug (XT30 / XT60 Smoke Stopper) is a premium in-line protection device designed to safely power up and test electronic systems such as FPV drones, RC aircraft, battery packs, ESCs, and embedded electronics. Manufactured by Amass-compatible safety accessory standards, this device is widely used as a “smoke stopper” to prevent damage during first-time power checks or troubleshooting.

It works by placing a resettable fuse (PTC / polyfuse) in series with the power line, which immediately limits current if a short circuit or wiring fault is detected, protecting sensitive electronics from permanent damage.

Key Function

When you power your drone or circuit for the first time, the device:

Allows safe startup if wiring is correct
Instantly limits current if a short circuit occurs
Cuts power temporarily to prevent “magic smoke” damage
Automatically resets after the fault is removed

This makes it an essential tool for first power-on testing and debugging.

Key Features

Compatible with XT30 and XT60 connectors
Supports 1–6S LiPo systems (3V–30V)
Built-in resettable fuse (PTC protection)
Typical trip current ~1A, hold current ~0.5A (varies by model)
Fast response to short circuits and overloads
LED indication (on normal operation / off when tripped, depending on model)
Lightweight and portable design
Reusable protection (self-reset after fault removal)
Ideal for safe electronics debugging

Applications & Use Cases

First power-up of FPV drones
Testing new ESC, FC, or wiring setups
Battery pack safety checks
Robotics and DIY electronics debugging
Preventing damage during soldering mistakes
RC aircraft and vehicle maintenance
Safe workshop testing tool for LiPo systems

Technical Specifications

Product Name: Amass XT30 / XT60 Fuse Installation Test Safety Plug
Input Voltage: 1–6S (3–30V DC)
Connector Type: XT30 / XT60 compatible
Protection Type: Resettable PTC fuse (self-healing)
Trip Current: ~1.0A (typical)
Hold Current: ~0.5A (typical)
Function: Short-circuit and overload protection
Reset Method: Automatic reset after disconnect/recovery
Housing Material: Durable plastic + metal contacts
Weight: ~10–15g (varies by version)
Operating Use: Temporary in-line safety testing only

Why Choose This Device?

The Amass XT30/XT60 Smoke Stopper is one of the most important tools for anyone working with drones or LiPo batteries because it acts as a cheap insurance layer between your battery and your electronics. Instead of instantly burning components during a wiring mistake, it safely limits current and gives you time to diagnose the problem.

It is especially useful for beginners and builders because it significantly reduces the risk of damaging expensive flight controllers, ESCs, and battery systems during testing.

Package Includes

1 × Amass XT30 / XT60 Fuse Installation Test Safety Plug (1–6S, 30V)

Out of stock

Ublox NEO M8N GPS For APM With Compass

₹ 2,323.00 ₹ 3,322.00

-30%

Out of stock

F405 Flight Controller With OSD 16M Black Box ＆ 60A 4IN1 3-6S Brushless ESC

₹ 6,923.00 ₹ 9,900.00

-30%

Out of stock

Battery Charger Board XT90 XT60 XT30 JST T Plug

₹ 692.00 ₹ 990.00

-30%

Out of stock

4pc M3x7+4.5 M3 Rubber Anti Vibration Damping Screws with Shock-absorbing Ring

₹ 156.00 ₹ 224.00

-30%

In stock

1/4" 8mm Ratchet Screwdriver Socket Wrench Tool for FPV Brushless Motors, Propellers

₹ 937.00 ₹ 1,340.00

-30%

Fast Propeller Changes with the 8mm Ratchet Screwdriver

Removing tight propeller nuts in the field can be difficult with standard tools. This 8mm Ratchet Screwdriver solves that problem because it features a smooth, dual-direction mechanism. You can tighten or loosen hardware in seconds without removing the tool from the nut. Since it is compact, it fits perfectly into any FPV field repair kit.

A Versatile Socket wrench tool for FPV Pilots

Every drone enthusiast needs a reliable Socket wrench tool for motor maintenance. This Gemfan-branded wrench is designed specifically for M5 propeller nuts. While traditional wrenches are bulky, this 8mm Ratchet Screwdriver is lightweight and portable. It also features an ergonomic handle so you can apply torque without hurting your hands.

Durable Engineering for Daily Use

The 8mm Ratchet Screwdriver is constructed from high-grade steel for long-term reliability. This material choice is important because it prevents the socket from rounding off over time. Also, the non-slip grip ensures you maintain control even in humid or oily conditions. Using this Socket wrench tool makes routine motor checks fast and effortless.

Features and Benefits

Smooth Ratchet Action – Allows for quick tightening and loosening in confined FPV frames.
Removable 8mm Socket – Fits standard FPV brushless motor hardware perfectly.
Ergonomic Non-Slip Handle – Provides a comfortable and secure grip for precise control.
Dual-Function Mechanism – Operates as both a ratchet and a screwdriver for extra utility.
Compact and Lightweight – Easy to carry in a pocket or drone bag for field repairs.

Technical Specifications

Specification	Details
Brand	Gemfan
Drive Size	1/4"
Socket Size	8mm
Material	High-Grade Steel

Compatibility Table

Component Type	Hardware Size
FPV Motors	M5 Propeller Nuts
RC Car Wheels	8mm Hex Nuts
General Mech	1/4" Drive Bits

Keep Your Socket wrench tool Ready for Field Repairs

Always keep your 8mm Ratchet Screwdriver clean to ensure the mechanism remains smooth. Specifically, a small drop of oil on the gears will keep the Socket wrench tool working like new. This 8mm Ratchet Screwdriver is the most convenient tool for any pilot's bench. Invest in a quality Socket wrench tool to make your maintenance tasks faster today.

Out of stock

1/3" CMOS 1500TVL Mini FPV Camera 2.1mm Lens PAL / NTSC With OSD Orange

₹ 1,561.00 ₹ 2,233.00

-30%

Professional Racing Quality with the 1500TVL Mini FPV Camera

Flickering video and poor low-light visibility are the enemies of any FPV pilot. This 1500TVL Mini FPV Camera solves these issues because it features a high-resolution CMOS sensor. You can navigate through dark areas effortlessly while maintaining a clear view of the track. Since it weighs only 6 grams, it won't affect the flight dynamics of your micro drone.

Benefits of This drone fpv camera for Racing

The 1500TVL Mini FPV Camera offers a wide voltage range for versatile power options. It integrates perfectly with most flight controllers and video transmitters. While other cameras are bulky, this drone fpv camera fits into the tightest frames. It also includes an On-Screen Display (OSD) so you can adjust settings mid-field.

Advanced Imaging and Low-Light Performance

This 1500TVL Mini FPV Camera utilizes 3DNR and D-WDR technology to balance light and shadow. This is important because it prevents the sun from washing out your video feed. Also, the 2.1mm lens provides a wide perspective for better situational awareness. Using this 1500TVL Mini FPV Camera gives you a competitive edge in every race.

Features and Benefits

1500TVL Horizontal Resolution – Delivers ultra-clear video for precise drone control.
0.001 Lux Sensitivity – Provides exceptional visibility during dusk or indoor flights.
Ultra-Lightweight Design – Weighs only 6g to maximize your drone's speed and agility.
Adjustable OSD Menu – Allows you to customize exposure and white balance on the fly.
Wide Voltage Input (5V-30V) – Compatible with a broad range of drone fpv camera setups.

Technical Specifications

Specification	Details
Brand	ReadytoSky (JINJIEAN)
Sensor	1/3" CMOS
Resolution	1500TVL
Lens	2.1mm

Compatibility Table

Drone Type	Mounting Size
FPV Racing Quads	19mm x 19mm
Freestyle Drones	19mm x 19mm
CineWhoops	19mm x 19mm

Optimize Your drone fpv camera Performance

To get the best results, ensure your Mini FPV Camera is securely mounted to reduce vibration. Specifically, use the OSD to calibrate the colors for your specific environment. This 1500TVL Mini FPV Camera is the ultimate choice for pilots who refuse to compromise on quality. Trust this drone fpv camera for your most demanding flights.

Out of stock

KK2.15 LCD Multirotor Flight Control Board for Quadcopter KK2 6050MPU 644PA F450 F550 S500

₹ 5,872.00 ₹ 8,397.00

-30%

KK2.15 LCD Flight Controller – The Ultimate "No-PC" Setup Solution

Take the complexity out of drone building with the KK2.15 LCD Flight Controller. Renowned in the hobbyist community for its user-friendly interface, this board is the perfect "brain" for classic builds like the F450, F550, or S500. Unlike modern flight controllers that require a laptop and complex software for every adjustment, the KK2.15 features a built-in LCD screen and four-button interface, allowing you to tune PIDs, change motor layouts, and calibrate sensors right at the flying field.

Equipped with the reliable 6050MPU sensor (Gyro/Acc), the KK2.15 provides stable auto-leveling for beginners and a crisp "Acro" mode for those looking to perform flips and rolls.

Key Highlights:

Plug-and-Play Tuning: No computer? No problem. The integrated LCD screen allows for full configuration, from ESC calibration to advanced flight tuning, directly on the board.
Superior Sensor Fusion: The 6050MPU chipset ensures high-speed processing of movement data, resulting in smooth takeoffs and locked-in stability.
Versatile Multi-Rotor Support: Highly adaptable firmware supports a massive range of configurations including Dualcopters, Tricopters, Quadcopters, Hexacopters, and even Octocopters.
Auto-Level Logic: A robust self-leveling mode makes it much easier for new pilots to maintain a steady hover and recover from aggressive maneuvers.
Lightweight & Compact: At just 21g, it provides full-scale control without weighing down your aircraft, preserving your flight time and agility.

Technical Specifications

Feature	Details
IC	Atmega644 PA
Sensor	6050MPU InvenSense Inc.
Input Voltage	4.8V – 6.0V
Signal from Receiver	1520us (5 channels)
Signal to ESC	1520us
Size	50.5mm x 50.5mm x 12mm
Weight	21g
Firmware Interface	Standard 6-pin AVR

Frequently Asked Questions

Do I need a computer to set this up? No! One of the best features of the KK2.15 is that all primary setup and tuning can be done via the onboard screen and buttons.
How do I power the board?

The board is typically powered via the 5V BEC output from your first ESC (connected to Motor Header 1).
Is it compatible with my frame? Yes, if you are building a multi-rotor (3 to 8 motors), the KK2.15 has pre-programmed layouts to suit almost any standard frame geometry.

Partsbaba Quality Guarantee: We only supply 100% genuine and original KK2.15 boards. All units are backed by our 14-day replacement warranty against manufacturing defects. For setup guides and return details, please visit our support page.

In stock

700TVL COMS Camera

₹ 978.69 ₹ 1,400.00

-30%

Readytosky 700TVL FPV Camera – Wide-Angle Clarity for Racing & Freestyle

Experience the thrill of high-speed flight with the Readytosky 700TVL FPV Camera. Engineered specifically for the demands of FPV racing and fixed-wing soaring, this camera balances high resolution with ultra-low latency. Featuring a 1/4" CMOS sensor and a 2.8mm wide-angle lens, it provides a clear, expansive field of view (90°) that allows pilots to navigate tight gaps and high-speed corners with absolute confidence.

Every component, from the optimized PCB to the lightweight, impact-resistant plastic housing, is designed to minimize weight while maximizing durability on frames like the QAV210, 250, or custom fixed-wing builds.

Key Highlights:

Low-Latency Performance: Optimized for real-time feedback with sub-1ms glass-to-glass latency, ensuring your sticks feel "connected" to the drone's movement.
Superior Wide-Angle View: The 2.8mm lens offers a 90-degree perspective, providing the perfect balance between a broad peripheral view and minimal fish-eye distortion.
Wide Voltage Flexibility: Supports a versatile 7.5V to 13V input, making it compatible with a wide range of power distribution boards and direct lipo connections.
Intelligent Image Processing: Features Auto White Balance (AWB) and Automatic Gain Control (AGC) to maintain consistent exposure when transitioning between bright skies and shaded areas.
Ultra-Lightweight Design: Specially built for FPV, the compact form factor ensures easy mounting without affecting the center of gravity of your aircraft.

Technical Specifications

Feature	Details
Brand	Readytosky
Resolution	700TVL
Sensor	1/4" CMOS
Lens	2.8mm Wide Angle (90°)
Signal System	PAL / NTSC (Selectable)
Input Voltage	7.5V – 13V
Electronic Shutter	PAL: 1/50–1/100,000s \| NTSC: 1/60–1/120,000s
Auto Controls	Gain (On/Off), White Balance (On/Off)
Weight	Optimized for FPV Racing

Ideal Applications:

FPV Racing Drones: Low latency is critical for staying on the race line.
Fixed-Wing Aircraft: The wide FOV is perfect for low-altitude proximity flying.
Mini Quads (180mm–250mm): Compact size fits perfectly in standard camera mounts.

Partsbaba Quality Promise: We guarantee that all Readytosky optics are 100% genuine and original. Your purchase includes a 14-day replacement warranty against manufacturing defects, so you can take to the skies with total peace of mind.

Out of stock

XT-90 Male & Female Plug Connector Yellow for Battery Quadcopter Multicopter

₹ 72.00 ₹ 180.00

-60%

Readytosky XT90 Connector Set (Male & Female) – High-Current Heavy Duty Interface

Power your high-performance RC builds with the Readytosky XT90 Connector Set. Engineered for large-scale drones, high-voltage multicopters, and heavy-duty RC vehicles, the XT90 is the industry standard for systems that demand massive current delivery without the risk of heat-related failure.

Molded from high-temperature, flame-retardant nylon, these connectors feature 4.5mm gold-plated bullet pins that ensure maximum surface contact and minimal resistance. Whether you are running a 6S racing rig or an industrial-grade cinelifter, the XT90 provides the secure, "clatter-free" connection required for high-vibration environments.

Key Highlights:

Massive Current Capacity: Built to handle a constant 90A current with burst capabilities up to 120A, making them ideal for high-torque brushless motors and large LiPo packs.
Easy-Solder Design: The pins feature a "half-cup" soldering terminal, making it significantly easier to secure thick gauge wires (up to 10AWG) for a professional, low-resistance joint.
Spark-Resistant Geometry: Designed with deep-recessed terminals to prevent accidental short circuits and provide a tight, friction-locked fit that won't vibrate loose during flight.
Polarity Protection: The distinct asymmetrical housing ensures that it is physically impossible to plug your battery in backward, protecting your ESCs and flight controllers from catastrophic reverse-polarity damage.
Premium Conductivity: High-grade 4.5mm gold plating prevents oxidation over time, ensuring your power delivery remains consistent even after hundreds of plug cycles.

Technical Specifications

Feature	Details
Brand	Readytosky
Connector Type	XT90 (Male & Female Pair)
Material	High-Temp Nylon / Gold-Plated Copper
Bullet Diameter	4.5mm
Current Rating	90A (Continuous) / 120A (Peak)
Recommended Wire	10AWG – 12AWG
Color	High-Visibility Yellow

Pro-Builder Tip:

Because the XT90 handles such high current, we recommend using high-quality 10AWG or 12AWG silicone wire. Always use heat shrink tubing over the soldered terminals to ensure total insulation against the carbon fiber frames of your drone.

Partsbaba Quality Assurance: All Readytosky connectors are 100% genuine and original. We provide a 14-day replacement warranty against manufacturing defects, so you can build your high-power systems with complete confidence.

Out of stock

CC3D Power Distribution Board LED Strip Control For CC3D Flight Controller Board

₹ 135.70 ₹ 195.00

-30%

Readytosky CC3D Power Distribution Board (PDB) – Specialized for QAV250 Mini Quads

Streamline your mini quadcopter build with the Readytosky CC3D Power Distribution Board. Specifically engineered for the iconic QAV250 frame and CC3D flight controller ecosystem, this PDB acts as a centralized hub for your power needs. By eliminating messy "octopus" wiring harnesses, it allows you to solder ESCs and battery leads directly to a single, rigid board, significantly improving electrical reliability and creating a professional, low-profile finish.

The board's footprint is a perfect 1:1 match for the standard CC3D mounting pattern, allowing you to stack it directly beneath your flight controller using nylon standoffs to save precious internal space.

Key Highlights:

Integrated Accessory Control: Features a built-in 2-way mechanical switch, giving you manual control over auxiliary components like high-intensity LED strips or FPV transmitters.
Precision Stackable Design: Designed with the exact dimensions and hole spacing (36x36mm) of the CC3D Flight Controller for a seamless, "sandwich-style" stack.
Ultralight Performance: At a mere 3.5g, this PDB provides essential power routing without compromising the power-to-weight ratio of your racing drone.
Optimized for QAV250/ZMR250: The layout is specifically tailored for 250-class frames, placing solder pads in the ideal locations for standard ESC arm mounting.
Rugged PCB Construction: High-conductivity copper traces ensure stable power delivery even during high-throttle punch-outs.

Technical Specifications

Feature	Details
Brand	Readytosky
Compatibility	CC3D / Naze32 / F3 (36mm Stack)
Frame Target	QAV250 / ZMR250 / Mini Quadcopters
Switch Type	2-Way (LED / FPV Control)
Weight	3.5g (Ultralight)
Mounting Pattern	Standard 30.5mm x 30.5mm Holes

Installation Note:

To maintain the best signal integrity, we recommend using nylon standoffs when stacking this PDB with your flight controller. This prevents electrical interference and physical contact between the two boards.

Partsbaba Quality Promise: All Readytosky power components are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can solder and build with total confidence.

In stock

75cm Fast-fold Landing Pad, Waterproof Double Side Double Color Helipad

₹ 706.00 ₹ 1,010.00

-30%

Readytosky PGY Mini 750 Fast-Fold Landing Pad – Your Portable Drone Helipad

Protect your drone’s sensitive gimbal, camera, and motors with the Readytosky PGY Mini 750. This 75cm fast-fold landing pad provides a clean, flat, and highly visible landing zone, preventing dust, grass, or moisture from interfering with your aircraft's internal components during takeoff and landing.

Constructed from premium waterproof nylon, this pad is designed for pilots who frequent diverse environments—from sandy beaches to damp fields. Its high-precision printing ensures the colors remain vibrant and fade-resistant, even after prolonged exposure to the sun.

Key Highlights:

75cm Landing Zone: Offers a generous target for GPS-assisted returns and manual landings, suitable for everything from mini quads to professional-grade platforms.
Double-Sided, Dual-Color Design: Features high-contrast orange and blue sides, allowing you to flip the pad to ensure maximum visibility against any terrain, whether it's snow, grass, or dirt.
Fast-Fold Portability: The spring-steel internal frame allows the pad to "pop up" instantly and fold down to a compact 28cm diameter for easy storage in your backpack or gear bag.
Weatherproof & Durable: Made from high-quality, waterproof nylon that is easy to wipe clean and built to withstand the downwash of high-torque motors.
Universal Compatibility: The ideal size for the DJI Mavic Series, Phantom 3/4, Inspire 1, and a wide range of FPV racing drones and RC helicopters.

Technical Specifications

Feature	Details
Brand	Readytosky / PGY
Diameter (Expanded)	75cm
Diameter (Folded)	28cm
Material	High-Quality Waterproof Nylon
Colors	Reversible Orange / Blue
Carry Bag	Included
Weight	Optimized for Portability

What’s Included:

1 x 75cm Fast-Fold Landing Pad
1 x Specialty Carrying Case: Featuring a convenient nylon handle for effortless transport to your flight location.

Partsbaba Quality Assurance: We only supply 100% genuine and original products. Every landing pad is backed by our 14-day replacement warranty against manufacturing defects. For more information on our policies, please visit our returns and cancellations page.

Out of stock

4Pcs Anti Vibration Rubber Balls Blue

₹ 74.00 ₹ 185.00

-60%

Readytosky Anti-Vibration Gimbal Dampeners (4-Piece Set) – Eliminate "Jello" Effect

Achieve professional-grade, cinematic stability with the Readytosky Anti-Vibration Rubber Dampeners. Specifically engineered for gimbal mounting plates on DJI Phantom series drones and custom FPV camera rigs, these high-elasticity silicone balls act as a mechanical low-pass filter. By absorbing high-frequency motor vibrations and frame resonance, they effectively eliminate the "jello effect" in your video, ensuring buttery-smooth footage even during aggressive flight maneuvers.

These dampeners are the ideal balance between "soft" for vibration absorption and "firm" for structural support, making them a must-have for any aerial photography or videography platform.

Key Highlights:

Advanced Vibration Isolation: Effectively decouples the camera gimbal from the drone frame, neutralizing the micro-shakes that cause distorted or wavy video.
Precision Silicone Build: Crafted from durable, high-grade silicone that maintains its elasticity in both extreme cold and high-heat environments.
High Load Capacity: Each ball is rated to support between 120g and 180g, allowing a 4-piece set to easily stabilize a standard gimbal and action camera setup.
Ultralight Profile: At just 1.5g per unit, these dampeners provide maximum stabilization without impacting your drone’s center of gravity or flight time.
Standard Fitment: Designed with a 7mm inner diameter to fit most standard gimbal mounting holes found on DJI Phantom 2, 3, and various 3D-printed or carbon fiber mounts.

Technical Specifications

Feature	Details
Brand	Readytosky
Quantity	4 Pieces
Material	High-Elasticity Silicone
Color	Vibrant Blue
Dimensions	21mm (H) x 17mm (W)
Inner Diameter	7mm
Weight	1.5g per ball
Load Rating	120g – 180g (per ball)

Installation Pro-Tip:

For maximum security, especially on larger camera rigs, we recommend threading a small, loose-fitting zip tie through the center of the dampening balls. This acts as a "safety tether" to prevent the gimbal from separating from the frame in the event of a hard landing or extreme impact.

Partsbaba Quality Assurance: We only supply 100% genuine and original Readytosky components. Your purchase is protected by our 14-day replacement warranty against manufacturing defects. For full details on returns, please visit our support page.

In stock

4Pcs M3 Shockproof Sponge Pad Black

₹ 68.00 ₹ 170.00

-60%

Readytosky M3 Shockproof Landing Pads (4-Piece Set) – High-Density Vibration Isolation

Give your racing drone a softer touch with the Readytosky M3 Shockproof Sponge Pads. These ultralight, high-density landing pads are the perfect alternative to heavy plastic or metal landing gear. Specifically designed for mini quads ranging from 180mm to 300mm, they provide a critical "crumple zone" that absorbs the kinetic energy of hard landings, protecting your carbon fiber frame and sensitive internal electronics from stress fractures.

Beyond landing protection, these pads feature a genuine 3M adhesive backing, making them dual-purpose: they can also be used as vibration-dampening mounts for flight controllers and gyros to ensure ultra-stable flight telemetry.

Key Highlights:

Superior Impact Absorption: Engineered to dampen the shock of fast, aggressive landings, significantly extending the life of your motor bolts and arm tips.
Ultralight Performance: Designed for FPV racing and freestyle, these pads add virtually zero weight, ensuring your quad remains agile and responsive.
Industrial-Grade 3M Adhesive: The pre-applied 3M backing provides a permanent, vibration-resistant bond to carbon fiber, plastic, or aluminum surfaces.
Anti-Static & Protective: The specialized sponge material helps prevent static buildup and keeps your frame slightly elevated off damp or dusty surfaces.
Universal Mini-Quad Fit: A perfect fit for the ZMR250, QAV210, QAV-R 220, and FPV racing frames. Simply peel and stick to the underside of your motor mounts.

Technical Specifications

Feature	Details
Brand	Readytosky
Quantity	4 Pieces
Material	High-Density Shockproof Sponge
Adhesive	Genuine 3M Heavy-Duty Tape
Compatibility	180mm – 300mm Frames (ZMR, QAV, etc.)
Application	Landing Gear / Gyro Mounting / Vibration Isolation

Installation Pro-Tip:

Before applying, clean the bottom of your drone's carbon fiber arms with a little isopropyl alcohol. This ensures the 3M adhesive creates a maximum-strength bond that won't peel off during high-speed slides or grass landings.

Partsbaba Quality Assurance: We only supply 100% genuine Readytosky accessories. Your purchase is protected by our 14-day replacement warranty against manufacturing defects. For full details on our returns policy, please visit our support page.

Low in stock

Aluminum Motor Bullet Cap Quick-release Wrench Black

₹ 281.00 ₹ 402.00

-30%

Readytosky Aluminum Motor Nut Quick-Release Wrench – Essential Field Tool

Say goodbye to bulky pliers and stripped motor caps. The Readytosky Quick-Release Wrench is a precision-engineered multi-tool designed specifically for FPV drone pilots and RC hobbyists. Crafted from high-grade 6063 Aluminum, this lightweight yet incredibly durable tool allows you to swap propellers or tighten motor nuts in seconds, even at the flight line.

Whether you're flying 2204, 2205, or high-performance RS series motors, this dual-sided wrench provides the perfect leverage without damaging your motor's finish.

Key Highlights:

3-in-1 Universal Compatibility: Expertly machined to fit M3, M4, and M5 hex nuts, making it compatible with the vast majority of mini-quad and racing drone motors.
Dual-Sided Precision: One end is dedicated to M5 and M4 prop nuts, while the flip side is tailored for M3 hardware—eliminating the need to carry multiple heavy sockets.
Ergonomic Quick-Release: The slim, flat profile provides excellent grip and leverage, allowing for rapid "one-twist" tightening and loosening of bullet-style motor caps.
Aircraft-Grade Construction: Built from 6063 Aluminum, offering a perfect balance of high tensile strength and ultralight portability.
Pocket-Sized Convenience: Its compact, flat design slides easily into a battery strap or transmitter case, ensuring you're never stranded by a loose prop.

Technical Specifications

Feature	Details
Brand	Readytosky
Material	6063 Aluminum Alloy
Supported Sizes	M3, M4, M5 Hex Nuts
Color	Sleek Black Anodized
Compatibility	2204, 2205, 2206, 2306, and RS Series Motors
Weight	Ultralight (Tool-kit optimized)

Why Every Pilot Needs One:

Traditional wrenches are often too thick to fit between the propeller blades and the motor bell. This specialized tool's thin profile ensures you can reach the nut easily, preventing the accidental "slip" that can lead to cut fingers or scratched motor magnets.

Partsbaba Quality Assurance: We only supply 100% genuine and original Readytosky tools. Your purchase is protected by our 14-day replacement warranty against manufacturing defects. For more details on our policies, please visit our returns page.

In stock

Pixhawk 2.4.8 Set, PX4/APM Flight Controller

₹ 15,181.00 ₹ 21,709.00

-30%

Pixhawk 2.4.8 (APM 2.8 Combo) Flight Controller Set – Professional UAV Navigation Stack

Unlock advanced autonomous capabilities with the Pixhawk 2.4.8 Flight Control System. This comprehensive combo set is the industry standard for hobbyists, researchers, and professional drone builders who require a reliable, open-source ecosystem for UAV projects. Powered by a high-performance 32-bit ARM Cortex M4 processor, the Pixhawk 2.4.8 offers a significant leap in processing power and sensor reliability over traditional flight controllers, supporting advanced real-time operating systems (NuttX) and complex flight stacks like ArduPilot and PX4.

Whether you are building a long-range survey drone, an autonomous rover, or a heavy-lift multicopter, this set provides the redundant power systems and fail-safe mechanisms necessary for mission-critical operations.

Key Highlights:

Advanced Processing Power: Features the STM32F427 Cortex M4 (168MHz) with a hardware floating-point unit and 256K RAM, ensuring smooth handling of complex navigation algorithms.
Redundant Sensor Suite: Equipped with a 6-axis accelerometer/gyroscope, magnetometer, and a high-precision barometer for rock-solid altitude hold and GPS-assisted flight.
Extensive I/O Support: Includes 14 PWM/Servo outputs and dedicated ports for UART, I2C, SPI, CAN, and SBUS, allowing for seamless integration of GPS, telemetry, and payload gimbals.
Mission Safety & Fail-Safes: Integrated backup controller and dual power inputs ensure that your aircraft stays protected in the event of a primary system failure.
Data-Driven Analysis: Features an onboard Micro SD slot for real-time high-speed flight data logging, essential for post-flight tuning and troubleshooting.
Ready-to-Fly Combo: This "Full Combo" includes everything from the shock absorber mount to the power module, eliminating compatibility guesswork.

Technical Specifications

Feature	Details
Main Processor	32-bit STM32F427 Cortex M4 (168MHz)
Backup Processor	STM32F103 fail-safe co-processor
Memory	2MB Flash / 256KB RAM
Sensors	L3GD20 Gyro / LSM303D Accel-Mag / MPU6000 / MS5611 Baro
Interfaces	5x UART, 2x CAN, I2C, SPI, 3.3 & 6.6V ADC
Power Input	Redundant power supply compatible (via Power Module)
Mounting	Includes anti-vibration shock mount

Comprehensive Packing List:

1x Pixhawk 2.4.8 Flight Controller
1x Power Module (with XT60 connectors)
1x Vibration Damper/Shock Mount
1x Safety Switch & External Buzzer
1x I2C Expansion Board & RGB Connector
1x PPM Encoder (for PWM receiver compatibility)
1x SD Card (Pre-installed for logging)

Pro-Builder Tip:

The Pixhawk 2.4.8 is a "Current-Sensing" powerhouse. When setting up your Power Module in Mission Planner, ensure you calibrate the voltage and current sensors. This allows the Pixhawk to trigger an automatic "Return to Launch" (RTL) if your battery drops below a specific percentage, potentially saving your expensive UAV from a crash!

Partsbaba Authenticity Guarantee: All ReadytoSky Pixhawk components are 100% genuine. We offer a 14-day replacement warranty against manufacturing defects, ensuring your autonomous project starts on solid ground.

In stock

GPS Foldable Holder Bracket Stand Base Antenna Black for 7M 8N

₹ 258.00 ₹ 369.00

-30%

ReadytoSky Foldable GPS Antenna Mount – Precision Stability for Long-Range UAVs

Protect your GPS signal and improve flight safety with the ReadytoSky Foldable GPS Bracket. Specifically designed to isolate your GPS module from the electromagnetic interference (EMI) generated by your drone's power distribution board and motors, this high-clearance stand ensures your flight controller achieves a faster, more stable satellite lock.

Crafted from a blend of lightweight aluminum and durable composite materials, this mount features a fold-down mechanism that allows for easy transport and storage without requiring you to disassemble your GPS wiring. It is the gold standard for APM, Pixhawk, and MultiWii builds where GPS accuracy is mission-critical.

Key Highlights:

Interference Reduction: By elevating your GPS/Magnetometer module away from high-current ESCs and motors, you significantly reduce "toilet bowling" and magnetic interference.
Universal Compatibility: Optimized for all standard GPS pucks, including the Ublox NEO-6M, M7N, M8N, and M10 series used in APM and Pixhawk ecosystems.
Rugged Foldable Design: The sturdy pivot joint allows the antenna to be folded flat against the frame during transit, then locked securely in an upright position for flight.
Precision CNC Components: Features a high-quality aluminum base and mounting plate for a vibration-free, secure attachment to your multirotor or quadcopter frame.
Lightweight Geometry: Engineered to provide maximum height and stability with minimal impact on your drone's overall takeoff weight.

Technical Specifications

Feature	Details
Brand	ReadytoSky
Material	CNC Aluminum & Carbon/Composite Rod
Design	Foldable / Collapsible
Compatibility	Ublox 6M, 7M, 8N, M10 & compatible GPS pucks
Application	APM, Pixhawk, MWC, and DJI-style builds
Color	Black

Pro-Builder Tip:

For the best results, use a small drop of blue thread-locker on the base mounting screws. This prevents the vibrations of the motors from loosening the bracket over time, ensuring your GPS stays perfectly level—which is vital for accurate "Position Hold" and "Auto Mission" modes!

Partsbaba Authenticity Guarantee: All ReadytoSky accessories supplied are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, helping you navigate with total confidence.

In stock

PPM Encoder V1.3 with Case

₹ 748.00 ₹ 1,070.00

-30%

ReadytoSky PPM Encoder V1.3 – High-Precision PWM to PPM Signal Converter

Simplify your flight controller wiring and resolve receiver compatibility issues with the ReadytoSky PPM Encoder V1.3. This essential module is designed for pilots using older PWM receivers (which use one wire per channel) with modern flight controllers like Pixhawk, APM, or Paparazzi that require a single-wire PPM input.

By encoding up to 8 individual PWM channels into a single, streamlined PPM composite signal, this encoder significantly reduces "cable clutter" and frees up valuable I/O ports on your autopilot. Housed in a protective plastic case, the V1.3 is pre-flashed and mission-ready out of the box.

Key Highlights:

8-Channel Signal Aggregation: Capable of reading up to 8 individual PWM input channels and merging them into one precise PPM output stream.
Plug-and-Play Firmware: Comes pre-flashed with the latest stable firmware, requiring no complex software setup for standard UAV operations.
Programmable & Customizable: Advanced users can re-flash the onboard ATmega328P via an AVR ISP programmer to invert PPM signals or adjust specific fail-safe values.
Protective Hard Case: Includes a durable, lightweight enclosure that shields the sensitive electronics from dust, moisture, and mechanical stress during flight.
Broad Autopilot Support: The industry-standard solution for connecting PWM-only receivers to Pixhawk 2.4.8, APM 2.8, and other modern 32-bit flight stacks.
Low Latency Conversion: High-speed processing ensures that your control inputs remain responsive with minimal signal delay.

Technical Specifications

Feature	Details
Brand	ReadytoSky
Model	PPM Encoder V1.3
Processor	ATmega328P
Input Channels	8 PWM Channels
Output	Single PPM Composite
Firmware	Pre-flashed (v2.3.16 or compatible)
Case Material	High-Grade Plastic
Dimensions	28mm x 27mm x 9mm (with case)

What’s in the Box:

1x PPM Encoder Module (with Case)
1x 10-pin Input Cable (PWM side)
1x 3-pin Output Cable (PPM side)

Pro-Builder Tip:

If you are transitioning to an autonomous flight stack like ArduPilot, using a PPM encoder is the most reliable way to maintain your current RC transmitter setup. Ensure that your receiver is powered through the encoder's input rail, and double-check your channel mapping in Mission Planner after the first connection to ensure all 8 channels are moving correctly!

Partsbaba Authenticity Guarantee: All ReadytoSky electronics are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can integrate this encoder into your UAV with complete confidence.

In stock

I2C Splitter

₹ 256.47 ₹ 367.00

-30%

ReadytoSky I2C Splitter Hub with Cable – Essential Pixhawk/APM Expansion

Maximize the peripheral capacity of your flight stack with the ReadytoSky I2C Splitter Hub. Standard flight controllers like the Pixhawk or APM often come with a limited number of I2C ports, which can become a bottleneck when adding advanced sensors. This bus expansion module acts as a high-speed "power strip" for your data, allowing you to connect up to four additional I2C devices—such as external compasses, digital airspeed sensors, LED modules, or specialized laser rangefinders—using only a single port on your flight controller.

Crafted for reliability in high-vibration environments, the ReadytoSky splitter ensures stable data transmission across all connected nodes, making it a critical component for professional UAV builds and complex autonomous platforms.

Key Highlights:

4-Way Port Expansion: Instantly converts one I2C port into four, enabling the simultaneous use of multiple external sensors and accessories.
Seamless Compatibility: Designed specifically for the Pixhawk (2.4.6/2.4.8) and APM 2.8 ecosystems, utilizing standard 4-pin JST-GH or DF13 style connections.
Plug-and-Play Installation: Includes a pre-terminated 4-wire cable, allowing for immediate integration without the need for custom soldering or wiring harnesses.
Ultralight & Compact: Measuring just 37mm x 18.3mm, this hub fits easily into tight frames and adds negligible weight to your aircraft's takeoff profile.
Robust Data Bus: Features a high-quality PCB that maintains signal integrity across all four ports, preventing sensor dropouts during critical flight maneuvers.

Technical Specifications

Feature	Details
Brand	ReadytoSky
Interface Type	I2C (Inter-Integrated Circuit)
Ports	1 Input → 4 Outputs
Dimensions	37mm x 18.3mm x 9mm
Included Cable	4-Wire I2C Connector
Compatibility	Pixhawk 2.4.8, APM 2.8, PX4, and Arduino

Pro-Builder Tip:

When connecting multiple high-draw I2C peripherals (like high-brightness RGB LED boards), ensure your Flight Controller’s internal regulator can handle the cumulative current. For complex setups with an airspeed sensor and external GPS/Compass, the ReadytoSky Splitter is the cleanest way to keep your wiring loom organized and "pro-tier" in appearance!

Partsbaba Quality Commitment: All ReadytoSky accessories are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can expand your autonomous system with total peace of mind.

Low in stock

Mini 5V Lost Buzzer with JST Female Plug

₹ 111.86 ₹ 160.00

-30%

ReadytoSky Mini 5V Lost Model Buzzer – High-Decibel Recovery Alarm

Never lose track of your aircraft again with the ReadytoSky Mini 5V Lost Model Buzzer. This compact, high-output audible alarm is the ultimate insurance policy for FPV drones, fixed-wing planes, and RC vehicles. Designed to trigger a loud, piercing alert during a signal loss or a crash, this buzzer helps you locate your model in tall grass, thick brush, or out-of-sight landing zones.

Equipped with a pre-soldered JST Female Plug, this buzzer offers a true plug-and-play solution for flight controllers and power distribution boards. Its ultralight footprint makes it an essential addition to even the smallest micro-quads, where every gram counts.

Key Highlights:

High-Decibel Alert: Engineered to produce a sharp, clear tone that cuts through ambient noise, making it significantly easier to recover "lost" models.
Plug-and-Play JST Connector: Features a standard JST female plug for a secure, solder-free connection to compatible pins on your flight stack or receiver.
Ultralight & Compact: Small enough to be tucked into tight frames or taped to an arm without affecting the flight dynamics or center of gravity of your drone.
Low-Power Efficiency: Optimized to run on a standard 5V rail, ensuring it won't drain your flight battery while providing maximum volume.
Multi-Purpose Functionality: Can be configured via Betaflight, INAV, or ArduPilot to act as a low-battery warning, a lost-model alarm, or a status indicator (arming/disarming).

Technical Specifications

Feature	Details
Brand	ReadytoSky
Operating Voltage	5V DC
Connector Type	JST Female Plug
Sound Output	High-Decibel Active Piezo
Dimensions	Approx. 9mm x 5.5mm (Buzzer unit)
Compatibility	Drones, RC Cars, Boats, and Arduino Projects
Application	Lost Model Alarm / Low Battery Warning

Pro-Builder Tip:

To get the most out of your buzzer in Betaflight, head to the "Configuration" tab and ensure "Beeper" is enabled. You can then assign a specific switch on your transmitter to the BEEPER mode in the "Modes" tab. If you ever go down in high weeds, just flip the switch to activate a constant "SOS" tone for easy recovery!

Partsbaba Quality Commitment: All ReadytoSky components are 100% genuine and original. We offer a 14-day replacement warranty against manufacturing defects, so you can fly with the confidence that you'll always find your way home.

Are you installing this on a racing drone for crash recovery, or are you looking to use it as a low-voltage alarm for a DIY electronics project?

In stock

Mini 12V 3A UBEC Input 4S-6S

₹ 281.00 ₹ 402.00

-30%

In stock

1200TVL HD COMS FPV Camera 2.8mm Lens PAL

₹ 1,589.00 ₹ 2,273.00

-30%

ReadytoSky 1200TVL HD FPV Camera 2.8mm – High Clarity Vision for FPV Drones

Upgrade your drone’s visual performance with the ReadytoSky 1200TVL HD FPV Camera, built for sharp imaging, low-light clarity, and reliable real-time video transmission. Designed for FPV drones and quadcopters, this compact camera delivers detailed footage and stable performance across various flying conditions.

With advanced image processing features like D-WDR and 2D Noise Reduction, you get balanced exposure and reduced noise, ensuring a clear view whether you're flying in bright sunlight or low-light environments. Its lightweight and compact design makes it perfect for both racing drones and aerial hobby builds.

Key Features:

High-Resolution Output: Up to 1200TVL clarity with a 2.8mm lens for sharp, detailed FPV footage.
Excellent Low-Light Performance: Minimum illumination of 0.01 Lux ensures visibility even in dim conditions.
Advanced Image Processing: D-WDR and 2DNR enhance contrast and reduce noise for smoother video quality.
Auto Light Adjustment: Equipped with Auto Gain Control (AGC) and Backlight Compensation (BLC) for consistent exposure.
Compact & Lightweight: Weighs only 12g with a 26 x 26 mm form factor—ideal for easy drone integration.
Day/Night Support: Automatically adapts between color and black & white modes based on lighting.

Technical Specifications:

Brand: ReadytoSky
Image Sensor: 1/4" or 1/3" CMOS SUPER HAD II
Horizontal Resolution: 700TVL / 1200TVL
Lens: 2.8mm
Signal System: PAL
S/N Ratio: >60dB (AGC OFF)
Electronic Shutter: PAL: 1/50 – 1/100,000
AGC: Yes
BLC: Yes
Minimum Illumination: 0.01 Lux / F1.2
WDR: D-WDR
DNR: 2DNR
Day/Night Mode: Auto / Color / B&W
Power Supply: DC 12V
Weight: 12g
Dimensions: 26 x 26 x 30 mm

Warranty:
All products sold by PartsBaba are 100% genuine and original. We provide a 14-day replacement warranty in case of manufacturing defects. Please refer to our Cancellation & Returns page for more details.

Get a clearer, more responsive FPV experience with the ReadytoSky 1200TVL Camera—built for precision flying and dependable performance.

Out of stock

4pc Brushless Motor 4 in 1 ESC Cable Wire Protective Tube

₹ 107.00 ₹ 154.00

-31%

In stock

Mini OSD For Pixhawk Flight Controller

₹ 1,409.00 ₹ 2,015.00

-30%

Out of stock

GIMBAL Vibration Damper Rubber Balls - (4 PIECES)

₹ 165.00 ₹ 236.00

-30%

GIMBAL Vibration Damper Rubber Balls (4 Pieces) – Overview

GIMBAL Vibration Damper Rubber Balls are high-quality silicone cushions engineered to isolate drone gimbals from frame vibrations. These dampers effectively minimize unwanted shake, ensuring smoother and more stable aerial footage.

Each pack includes four rubber balls (21×17 mm, 7 mm inner diameter), with each piece capable of supporting 120 g–180 g, making them ideal for lightweight camera and gimbal setups.

Key Features

Crafted from premium-quality silicone for durability and performance
Soft top layer absorbs high-frequency vibrations efficiently
Compact size (21×17 mm) with 7 mm inner diameter for easy installation
Each damper supports 120 g–180 g load capacity
Helps improve video stability and gimbal performance
Available in black or blue color options
Lightweight design with excellent elasticity
Pack of 4 pieces – suitable for replacements or partial setups

Applications & Use Cases

Mounting 3-axis brushless gimbals on drones
Reducing vibration in aerial photography and videography rigs
Enhancing stabilization for FPV drones and cinematic footage
Replacing worn-out dampers in existing gimbal systems
DIY and custom gimbal stabilizer builds

How to Use

Attach each rubber damper onto the gimbal mounting pins or studs, ensuring the softer side faces the gimbal frame. Secure the mounting plate properly and adjust the setup for optimal vibration isolation. Replace old or worn dampers regularly to maintain performance.

Why Buy from Partsbaba?

100% Genuine Products sourced from trusted suppliers
Fast Dispatch – Orders shipped within 24 hours*
Free Shipping on eligible orders
Multiple Payment Options – COD, UPI, cards, net banking
Expert Technical Support for guidance and troubleshooting
Easy Returns for defective or damaged items

Package Includes

1 × GIMBAL Vibration Damper Rubber Balls (4 Pieces)

Frequently Asked Questions

Q. How many damper balls are required for a 3-axis gimbal?
A standard 3-axis gimbal requires 12 dampers (4 per axis). This pack of 4 is suitable for replacements or single-axis use.

Q. Can these dampers handle heavy cameras?
Each ball supports 120 g–180 g. For heavier setups, use multiple dampers or opt for heavy-duty alternatives.

Q. Are these compatible with DJI and other gimbals?
Yes, the standard size (21×17 mm with 7 mm inner diameter) makes them compatible with most DJI and third-party gimbal mounts.

In stock

FS-iA6B - 2.4GHz 6 Channel AFHDS 2A Receiver 1500m PWM/PPM/i.bus/s.bus

₹ 1,452.00 ₹ 2,077.00

-30%

The FlySky FS-iA6B is a high-performance 2.4GHz 6-channel receiver designed for radio-controlled models that require stable connectivity, long-range operation, and multiple output options. Built with AFHDS 2A protocol, this receiver ensures reliable communication and smooth control for airplanes, gliders, helicopters, and other RC applications.

With support for PWM, PPM, i-BUS, and S.Bus, along with RSSI monitoring and online firmware updates, the FS-iA6B offers excellent flexibility and future-ready performance for hobbyists and professionals alike.

Key Features

6-channel receiver with stable 2.4GHz wireless connectivity
AFHDS 2A protocol for reliable and interference-resistant communication
Long operating range of 500 to 1500 meters (in air)
Supports PWM / PPM / i-BUS / S.Bus output modes
Equipped with dual 150mm copper tube antennas for strong signal reception
RSSI supported for real-time signal strength monitoring
Wide input voltage range of 4.0V to 8.4V
Online update support for firmware upgrades
Compact, lightweight, and easy to install

Technical Specifications

Specification	Details
Brand	FlySky
PWM Channels	6
Wireless Frequency	2.4GHz
Wireless Protocol	AFHDS 2A
Range	500 ~ 1500m (in air)
Antenna Type	Dual copper tube antenna (150mm × 2)
Operating Voltage	4.0V – 8.4V
RSSI Support	Yes
Data Port	PWM / PPM / i-BUS / S.Bus
Temperature Range	-10°C to 60°C
Humidity Range	20% – 95%
Online Update	Supported
Dimensions	47 × 26.2 × 15 mm
Weight	10g
Certifications	CE, RCM, FCC ID: N4ZFLYSKYIA10

Why Choose FlySky FS-iA6B?

The FlySky FS-iA6B is an ideal choice for RC enthusiasts looking for a dependable, feature-rich, and compact receiver. Its multi-output compatibility, extended control range, and excellent signal stability make it suitable for a wide range of remote-controlled applications.

Whether you are a beginner or an experienced hobbyist, this receiver helps deliver better control, safer operation, and improved overall performance.

Applications

Suitable for use in:

RC airplanes
RC gliders
RC helicopters
RC drones
RC boats
Other compatible radio-controlled models

Out of stock

FS-CT6B 2.4GHz 6CH Transmitter PS/2 PPM with FS-R6B Receiver

₹ 3,312.00 ₹ 4,737.00

-30%

The FlySky FS-CT6B 2.4GHz 6CH Transmitter with FS-R6B Receiver is a dependable and user-friendly radio control system designed for RC aircraft, cars, boats, and other remote-controlled models. Built for hobbyists and enthusiasts, this combo delivers stable signal transmission, precise control, and reliable performance for a smooth RC experience.

Operating on 2.4GHz frequency with AFHDS protocol, the FS-CT6B ensures interference-free communication and dependable connectivity. With 6 channels, it allows flexible control over multiple functions, making it a great choice for various RC applications.

Key Features

FS-CT6B Transmitter

6-channel transmitter for precise multi-function control
Operates on 2.4GHz frequency for stable and interference-free communication
Uses AFHDS protocol for reliable signal transmission
Equipped with low voltage alarm for battery monitoring
Includes PS/2 Port PPM for simulator and compatible device connectivity
Ergonomic and practical design for comfortable handling

FS-R6B Receiver

6 PWM output channels for accurate signal reception
Compatible with 2.4GHz frequency and AFHDS protocol
Compact and lightweight design for easy installation
Reliable performance for smooth model control

Technical Specifications

FS-CT6B Transmitter

Specification	Details
Channels	6
RF Range	2.4055 – 2.475 GHz
RF Power	< 20 dBm
Protocol	AFHDS
Low Voltage Alarm	< 9V
Port	PS/2 Port PPM
Antenna Length	26 mm
Power Input	12V DC (1.5V AA × 8)
Online Update	No
Weight	511g
Dimensions	189 × 97 × 295 mm
Color	Black
Certification	CE, FCC

FS-R6B Receiver

Specification	Details
Channels	6
Frequency	2.4GHz
Protocol	AFHDS
Antenna	Built-in
Power Input	4.0V – 6.5V DC
Online Update	No
Weight	13g
Dimensions	45 × 23 × 13 mm
Certification	CE, FCC

Why Choose FlySky FS-CT6B with FS-R6B?

The FlySky FS-CT6B and FS-R6B combo is a reliable choice for users looking for a cost-effective and efficient RC control system. It offers a good balance of performance, control accuracy, and ease of use, making it suitable for beginners as well as experienced RC hobbyists.

Whether you are flying an aircraft, driving an RC car, or operating a boat, this system provides the confidence and control needed for an enjoyable RC experience.

Applications

Suitable for:

RC airplanes
RC helicopters
RC cars
RC boats
Other compatible RC models

Package Includes

1 x FlySky CT6B Transmitter
1 x FS-R6B Receiver
1 x USB Interface Cable
1 x Software CD
1 x Receiver Binding Cable
1 x User Manual

📄 View Data Sheet

Out of stock

FS-i6 2.4G 6CH AFHDS 2A PWM Transmitter With FS-iA6B Receiver

₹ 4,867.00 ₹ 6,960.00

-30%

The FlySky FS-i6 2.4G 6CH AFHDS 2A Radio System is a reliable and beginner-friendly RC transmitter and receiver combo designed for a wide range of radio-controlled models. Paired with the FS-iA6B receiver, this system offers stable connectivity, responsive control, and excellent versatility for both new and experienced RC enthusiasts.

Built with AFHDS 2A technology, the FS-i6 delivers smooth, interference-resistant communication and supports multiple model types including fixed-wing aircraft, gliders, helicopters, and boats. With the ability to upgrade from 6 channels to 10 channels, it also provides room for future expansion as your RC skills grow.

Key Features

6-channel transmitter, upgradeable to 10 channels
Supports fixed-wing aircraft, gliders, helicopters, and boats
Operates on 2.4GHz AFHDS 2A protocol for stable and interference-free communication
Long control range of 500 to 1500 meters (in air)
Dual antenna design on both transmitter and receiver for improved signal reliability
Stores settings for up to 20 different models
LCD display for easy operation and configuration
Supports Chinese and English firmware
RSSI supported for signal strength monitoring
Receiver supports PWM / PPM / i-BUS / S.BUS
Lightweight and ergonomically designed for comfortable handling
Firmware update supported

Technical Specifications

FS-i6 Transmitter

Specification	Details
Channels	6 (Upgradeable to 10)
Supported Models	Fixed-wing, Glider, Helicopter, Boat
Frequency	2.4GHz
Protocol	AFHDS 2A
Range	500 – 1500m (in air)
Resolution	4096
Battery	1.5V AA × 4
Low Voltage Alarm	< 4.2V
Antenna	Dual
Display	LCD 128 × 64 Dot Matrix
Language	Chinese, English
Data Port	PS/2 (PPM)
Temperature Range	-10°C to +60°C
Humidity Range	20% to 95%
Firmware Update	Yes
Dimensions	174 × 89 × 190 mm
Weight	392g
Certifications	CE, RCM, PAHS, FCC

FS-iA6B Receiver

Specification	Details
Channels	6
Frequency	2.4GHz
Protocol	AFHDS 2A
Range	500 – 1500m (in air)
Antenna	Dual copper tube antenna (150mm × 2)
Operating Voltage	4.0V – 8.4V
RSSI Support	Yes
Data Port	PWM / PPM / i-BUS / S.BUS
Temperature Range	-10°C to +60°C
Humidity Range	20% to 95%
Firmware Update	Yes
Dimensions	47 × 26.2 × 15 mm
Weight	10g
Certifications	CE, RCM, FCC

Why Choose FlySky FS-i6?

The FlySky FS-i6 is an excellent choice for anyone looking for an affordable, feature-rich, and easy-to-use RC radio system. It offers a strong combination of precision control, expandability, and dependable performance, making it suitable for both beginners and hobbyists.

Its upgradable channel support, model memory, and multiple output options make it a practical long-term solution for growing RC needs.

Ideal For

RC beginners
RC hobbyists on a budget
Fixed-wing aircraft enthusiasts
Glider pilots
Helicopter users
RC boat operators

Package Includes

1 x FlySky FS-i6 2.4G 6CH PPM RC Transmitter
1 x FS-iA6B Receiver
1 x User Manual Booklet

Resources

User Manual Quick Start Guide

Out of stock

FS-i6X 2.4GHz 6CH AFHDS 2A Transmitter With FS-iA6B Receiver

₹ 5,515.00 ₹ 7,887.00

-30%

The FlySky FS-i6X 2.4GHz 6CH AFHDS 2A Transmitter with FS-iA6B Receiver is a dependable and high-performance radio control system designed for RC aircraft, quadcopters, helicopters, and other compatible aerial models. Built with AFHDS 2A technology, this combo offers stable signal transmission, precise control, and excellent responsiveness for both beginners and advanced RC enthusiasts.

With 6-channel functionality, 4096 stick resolution, micro-USB connectivity, and support for multiple receiver output modes, the FS-i6X provides a smooth and flexible RC flying experience.

Key Features

6-channel transmitter for accurate and versatile control
Operates on 2.4GHz AFHDS 2A protocol for stable and interference-resistant communication
Suitable for quadcopters, RC aircraft, and helicopters
4096 stick resolution for smooth and precise maneuvering
135 bands with 500KHz bandwidth for improved signal management
Micro-USB port for firmware updates and configuration
Low voltage alarm for better battery monitoring
Includes FS-iA6B receiver with PWM / PPM / i-BUS / S.BUS support
Dual antenna receiver for enhanced signal reliability
Lightweight and ergonomically designed for comfortable use

Technical Specifications

FS-i6X Transmitter

Specification	Details
Channels	6
Model Type	Quadcopter
RF Range	2.408 – 2.475GHz
Bandwidth	500KHz
Bands	135
RF Power	< 20dBm
Protocol	AFHDS 2A
Modulation Type	GFSK
Stick Resolution	4096
Low Voltage Alarm	Yes (Lower than 4.2V)
Port	Micro-USB
Power Input	6V DC (1.5V AA × 4)
Weight	392g
Dimensions	174 × 89 × 190 mm
Color	Black
Certification	CE, FCC: N4ZFLYSKYI6

FS-iA6B Receiver

Specification	Details
PWM Channels	6
Wireless Frequency	2.4GHz
Wireless Protocol	AFHDS 2A
Range	500 – 1500m (in air)
Antenna Type	Dual copper tube antenna (150mm × 2)
Operating Voltage	4.0V – 8.4V
RSSI Support	Yes
Data Port	PWM / PPM / i-BUS / S.BUS
Temperature Range	-10°C to +60°C
Humidity Range	20% – 95%
Online Update	Yes
Dimensions	47 × 26.2 × 15 mm
Weight	10g
Certification	CE, RCM, FCC ID: N4ZFLYSKYIA10

Why Choose FlySky FS-i6X?

The FlySky FS-i6X with FS-iA6B receiver is an excellent choice for RC users who need a budget-friendly, reliable, and feature-rich transmitter system. It delivers smooth handling, strong signal performance, and flexible connectivity, making it suitable for a variety of flying applications.

Its precision stick response, stable AFHDS 2A communication, and easy firmware update support make it a valuable option for both entry-level and experienced pilots.

Ideal For